[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 817.

FoBoT

sr. member

Activity: 658

Merit: 250

Quote from: mison on February 01, 2014, 11:04:09 AM

I am out.. miner do not work, there is not official information, no wallet... if every coin start is made in silent mode like this one, it work good in this reason.

ok, more for us. you know that there is still 2 hrs 50 min until launch? so no one is supposed to have the wallet yet, and the miner has been posted for about an hour already, the mega link is on the official website
http://www.ultracoin.net/ultracoinminer.html

have a nice day!

JamesRussles

full member

Activity: 150

Merit: 100

True to Decentralization

Quote from: pieterjanvh on February 01, 2014, 07:19:57 AM

Argh, large mining farms coming in from the start, that sucks for a small miner like myself...
To bad I was too late for the initial biddings Sad

buy some cheap from the early miners....thats what i have to do also

mison

full member

Activity: 224

Merit: 250

I am out.. miner do not work, there is not official information, no wallet... if every coin start is made in silent mode like this one, it work good in this reason.

Alty

hero member

Activity: 728

Merit: 500

Cloak Creator and Veritise - www.vcode.tech - See

Quote from: michaela_elise on February 01, 2014, 11:00:02 AM

Quote from: Alty on February 01, 2014, 10:57:49 AM

I love the ignorance in this thread.

I've posted two questions and both times they've been ignored.

First question: Will this work with GUIminer?

If not.

Second question : How do I get my 4 r290s to work with this?

You have 4 290's and don't know how to mine, were they for gaming originally?

You will use the ultracoin miner (link posted in OP) and official config instructions will be posted on the official pool.

Thank you

bathrobehero

legendary

Activity: 2002

Merit: 1051

ICO? Not even once.

ignorance =/= being ignored

michaela_elise

newbie

Activity: 39

Merit: 0

Quote from: Alty on February 01, 2014, 10:57:49 AM

I love the ignorance in this thread.

I've posted two questions and both times they've been ignored.

First question: Will this work with GUIminer?

If not.

Second question : How do I get my 4 r290s to work with this?

You have 4 290's and don't know how to mine, were they for gaming originally?

You will use the ultracoin miner (link posted in OP) and official config instructions will be posted on the official pool.

SkillRoad

member

Activity: 112

Merit: 10

Quote from: buaichiyuwh on January 31, 2014, 11:53:00 PM

need a pool!!

utc.hackshard.com

Alty

hero member

Activity: 728

Merit: 500

Cloak Creator and Veritise - www.vcode.tech - See

I love the ignorance in this thread.

I've posted two questions and both times they've been ignored.

First question: Will this work with GUIminer?

If not.

Second question : How do I get my 4 r290s to work with this?

spatula

hero member

Activity: 507

Merit: 500

Any advice on how to setup for CPU only miners?

ziggy909

newbie

Activity: 46

Merit: 0

Quote from: FoBoT on February 01, 2014, 09:52:23 AM

does scrypt-jane also require to do

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

?

thank you

this is always required with scrypt/scrypt-jane gpu mining

zoata87

legendary

Activity: 1218

Merit: 1004

Quote from: mison on February 01, 2014, 10:45:18 AM

how can you mining if the counter still show 3hours to start?

i dont know if it will work. just configured a bit and we'll see if its runnin or not Wink

FoBoT

sr. member

Activity: 658

Merit: 250

Quote from: mison on February 01, 2014, 10:36:44 AM

I want to mine it, but I have some questions:

why you do not make some step by step manual to configure miner for solo mining?
why we do not have source code ? running unknown exe file can be dangerous (steal passwords ..etc.)

this had info on solo mining
http://www.ultracoin.net/mining.html

ziggy posted this in the webchat channel

Quote

LINUX GPU MINER SOURCE AT https://mega.co.nz/#!p0kkRbbR!i5DqBPRL4WtDFU0d9uTlILwZxQui3EWHaJgaYcPA8L8 (use --scrypt-jane --sj-time 1387769316 --sj-nfmin 4 --sj-nfmax 30)

wing_hk

full member

Activity: 182

Merit: 100

Quote from: Freekje on February 01, 2014, 10:52:23 AM

Who do I contact to get the source so I can compile a linux miner ?!?

Maybe just as the op said:

source:
Link will be here on February 1st

Freekje

full member

Activity: 154

Merit: 100

Who do I contact to get the source so I can compile a linux miner ?!?

michaela_elise

newbie

Activity: 39

Merit: 0

"There will be official mining instructions on the pool." <- quote from owner

mison

full member

Activity: 224

Merit: 250

how can you mining if the counter still show 3hours to start?

chip99

full member

Activity: 196

Merit: 100

you should not allow pools at release .i saw how many coins did that and all failed and had major problems .

Alty

hero member

Activity: 728

Merit: 500

Cloak Creator and Veritise - www.vcode.tech - See

Quote from: zoata87 on February 01, 2014, 10:17:19 AM

Quote from: lemfuture on February 01, 2014, 10:11:40 AM

Quote from: zoata87 on February 01, 2014, 10:05:31 AM

"api-listen" : true,
"intensity" : "18",
"vectors" : "1",
"worksize" : "512",
"kernel" : "scrypt-jane",
"failover-only" : true,
"auto-fan" : true,
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"expiry" : "30",
"log" : "5",
"queue" : "1",
"retry-pause" : "5",
"scan-time" : "60",
"scrypt-jane" : true,
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"temp-hysteresis" : "3",
"shaders" : "2816",
"thread-concurrency" : "32765",
"gpu-powertune" : "20",
"gpu-thread" : "1",
"sharethreads" : "32",
"lookup-gap" : "2",
"gpu-engine" : "940",
"gpu-memclock" : "1500"
}

ill try this

how do i add the username, pass, and url in this format? cause id like to try this

full .conf:

{
"pools" : [
{
"url" : "POOLURL:PORT",
"user" : "USER.WORKER",
"pass" : "PW"
}
],
"api-listen" : true,
"intensity" : "18",
"vectors" : "1",
"worksize" : "512",
"kernel" : "scrypt-jane",
"failover-only" : true,
"auto-fan" : true,
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"expiry" : "30",
"log" : "5",
"queue" : "1",
"retry-pause" : "5",
"scan-time" : "60",
"scrypt-jane" : true,
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"temp-hysteresis" : "3",
"shaders" : "2816",
"thread-concurrency" : "32765",
"gpu-powertune" : "20",
"gpu-thread" : "1",
"sharethreads" : "32",
"lookup-gap" : "2",
"gpu-engine" : "940",
"gpu-memclock" : "1500"
}

I got 4 r290s in the same machine, can I configure it like this?

"gpu-thread" : "1", "2", "3", "4"

or is that total crap lol?

mineworker

full member

Activity: 130

Merit: 100

Quote from: quarkkid on February 01, 2014, 10:31:45 AM

....current diff 17 Huh

Where is that info?

mison

full member

Activity: 224

Merit: 250

I want to mine it, but I have some questions:

why you do not make some step by step manual to configure miner for solo mining?
why we do not have source code ? running unknown exe file can be dangerous (steal passwords ..etc.)

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 817. (Read 946656 times)