[ANN] BEAM | Mimblewimble | Private | Scalable | No ICO | No Pre Mine - page 50.

Beyerd17

full member

Activity: 826

Merit: 103

Quote from: rgsnedds on January 22, 2019, 02:55:13 AM

Quote from: mokoko on January 21, 2019, 09:54:02 PM

Hi I sent 16.5 Beam from Hotbit to my wallet but wallet history says FAILURE and I dont receive my Beams I dont understand what is the problem. Am I lost my Beams

Address: 122df3851bc7132292261da530f7509d23bdf6b6585a7c01adbe2f53231d03232d9
Txid: 1f11e453a6e9499492f14af62b8efc55 View Kernel ID
Kernel ID: fb4ff236858687bf49688df1eb321901c76f2b47061fa5af24468ff175046ec0

Thanks

I'd advise you contact hotbit. I did a successful trade on chainrift this morning and the transaction and tx went through flawlessly, in minutes.

It looks to me like some 90%+ of the BEAM "trade" at Hotbit is fake. What do you guys think.

rgsnedds

member

Activity: 952

Merit: 17

raskul

Quote from: mokoko on January 21, 2019, 09:54:02 PM

Hi I sent 16.5 Beam from Hotbit to my wallet but wallet history says FAILURE and I dont receive my Beams I dont understand what is the problem. Am I lost my Beams

Address: 122df3851bc7132292261da530f7509d23bdf6b6585a7c01adbe2f53231d03232d9
Txid: 1f11e453a6e9499492f14af62b8efc55 View Kernel ID
Kernel ID: fb4ff236858687bf49688df1eb321901c76f2b47061fa5af24468ff175046ec0

Thanks

I'd advise you contact hotbit. I did a successful trade on chainrift this morning and the transaction and tx went through flawlessly, in minutes.

mokoko

newbie

Activity: 84

Merit: 0

Hi I sent 16.5 Beam from Hotbit to my wallet but wallet history says FAILURE and I dont receive my Beams I dont understand what is the problem. Am I lost my Beams

Address: 122df3851bc7132292261da530f7509d23bdf6b6585a7c01adbe2f53231d03232d9
Txid: 1f11e453a6e9499492f14af62b8efc55 View Kernel ID
Kernel ID: fb4ff236858687bf49688df1eb321901c76f2b47061fa5af24468ff175046ec0

Thanks

akira128

newbie

Activity: 60

Merit: 0

Interesting read. Ok, I hope it wasn't me that caused this, but I did bring up a backup of version of my wallet today. Here's what happened. After upgrading my wallet to version 1.1.4201, something went horribly wrong. When the wallet came up, the balance was listed as 0, and all previous transactions show up as 'failed'. So, I went through the wallet restore process....which worked. However, receiving addresses aren't restored through this process. Looking through the BEAM documentation, I couldn't find any method to dump a private key address from a wallet file. I needed to receive my last payout from leafpool.com on my old address. So, I brought up a backed up version of the wallet (pre-upgrade) online. And it worked. It was a bit strange that the new wallet also received the funds as well (which I discovered later on) so I didn't need to transfer the funds from the old wallet to the new wallet. I have no idea how that's even possible. In any case I deleted the old wallet file afterwards.
**I just want to point out both wallets were never online at the same time.
It would be nice if the devs could create a function to dump + import addresses between wallet files.

BeamPrivacy

copper member

Activity: 328

Merit: 3

Beam me up Scotty!

Beam Blockchain Stop Event, Jan. 21st, 2019 — Post-Mortem https://medium.com/beam-mw/mimblewimble-blockchain-stop-event-postmortem-21012019-9a7ef38b2813 #SovereigntyByDesign #mimblewimble

Atomicc

member

Activity: 301

Merit: 31

Thank You for a prompt fix...work for now... Cool

BeamPrivacy

copper member

Activity: 328

Merit: 3

Beam me up Scotty!

We just released a new version: Agile Atom 1.1.4202 - Hotfix
https://medium.com/beam-mw/mimblewimble-agile-atom-114202-hotfix-release-notes-8c5ca1189e1d

BeamPrivacy

copper member

Activity: 328

Merit: 3

Beam me up Scotty!

The fix was committed on Github. We will be performing additional testing. We will release the binaries in the coming hours. Thanks for your patience.
https://github.com/BeamMW/beam/commit/9c0a93488f3ba6dab6e716750d76c5257ef2e5b2

Atomicc

member

Activity: 301

Merit: 31

Blockchain blocked... Mining stop...
Hope to see a fast recovery...

BoozyTalking

newbie

Activity: 315

Merit: 0

Leaf pool WTF??
https://i.imgur.com/XlctP9D.png

Something wrong with Beam blockchain or pool?

toogoody

jr. member

Activity: 588

Merit: 1

List of BEAM pools : https://miningpoolstats.stream/beam

BeamPrivacy

copper member

Activity: 328

Merit: 3

Beam me up Scotty!

Another busy week for Team Beam https://beamprivacy.substack.com/p/beam-2019-week-3 #mimblewimble #SovereigntyByDesign

versprichnix

sr. member

Activity: 876

Merit: 291

Quote from: lda1000 on January 20, 2019, 05:11:04 AM

Quote from: versprichnix on January 20, 2019, 03:29:38 AM

Quote from: lda1000 on January 19, 2019, 05:34:15 PM

Quote from: versprichnix on January 19, 2019, 04:43:49 PM

Quote from: BeamPrivacy on January 18, 2019, 06:11:16 AM

We released Beam's first official maintenance version
https://medium.com/beam-mw/mimblewimble-release-atom-agile-114194-fb4bfee831da

Can you make a wallet tar file for linux, please?

There you go
https://github.com/BeamMW/beam/releases/download/agile-atom-1.1.4194/linux-beam-node-1.1.4194.tar.gz

or .deb

https://github.com/BeamMW/beam/releases/download/agile-atom-1.1.4194/Beam-Wallet-1.1.4194.deb

The node ist not a GUI wallet, and the deb packackes needs root access for installation.

For security reasons I have running all my wallets in separate accounts, and installed without root access (tar or zip packages).

At this time I have run the deb package in a dedicated VM, but the resource consumption is a little bit high this way.

You are welcome.

Huh

Btw if you think installing a package dedicated for an operating system is classed as "high resource consumption" then you should definitely educate yourself in this area.

So, you have no doubt to recommend every wallet user, who has trust into a coin, to install the wallet with root permission?

lda1000

sr. member

Activity: 581

Merit: 253

Quote from: versprichnix on January 20, 2019, 03:29:38 AM

Quote from: lda1000 on January 19, 2019, 05:34:15 PM

Quote from: versprichnix on January 19, 2019, 04:43:49 PM

Quote from: BeamPrivacy on January 18, 2019, 06:11:16 AM

We released Beam's first official maintenance version
https://medium.com/beam-mw/mimblewimble-release-atom-agile-114194-fb4bfee831da

Can you make a wallet tar file for linux, please?

There you go
https://github.com/BeamMW/beam/releases/download/agile-atom-1.1.4194/linux-beam-node-1.1.4194.tar.gz

or .deb

https://github.com/BeamMW/beam/releases/download/agile-atom-1.1.4194/Beam-Wallet-1.1.4194.deb

The node ist not a GUI wallet, and the deb packackes needs root access for installation.

For security reasons I have running all my wallets in separate accounts, and installed without root access (tar or zip packages).

At this time I have run the deb package in a dedicated VM, but the resource consumption is a little bit high this way.

You are welcome.

Huh

Btw if you think installing a package dedicated for an operating system is classed as "high resource consumption" then you should definitely educate yourself in this area.

versprichnix

sr. member

Activity: 876

Merit: 291

Quote from: lda1000 on January 19, 2019, 05:34:15 PM

Quote from: versprichnix on January 19, 2019, 04:43:49 PM

Quote from: BeamPrivacy on January 18, 2019, 06:11:16 AM

We released Beam's first official maintenance version
https://medium.com/beam-mw/mimblewimble-release-atom-agile-114194-fb4bfee831da

Can you make a wallet tar file for linux, please?

There you go
https://github.com/BeamMW/beam/releases/download/agile-atom-1.1.4194/linux-beam-node-1.1.4194.tar.gz

or .deb

https://github.com/BeamMW/beam/releases/download/agile-atom-1.1.4194/Beam-Wallet-1.1.4194.deb

The node ist not a GUI wallet, and the deb packackes needs root access for installation.

For security reasons I have running all my wallets in separate accounts, and installed without root access (tar or zip packages).

At this time I have run the deb package in a dedicated VM, but the resource consumption is a little bit high this way.

lda1000

sr. member

Activity: 581

Merit: 253

Quote from: versprichnix on January 19, 2019, 04:43:49 PM

Quote from: BeamPrivacy on January 18, 2019, 06:11:16 AM

We released Beam's first official maintenance version
https://medium.com/beam-mw/mimblewimble-release-atom-agile-114194-fb4bfee831da

Can you make a wallet tar file for linux, please?

There you go
https://github.com/BeamMW/beam/releases/download/agile-atom-1.1.4194/linux-beam-node-1.1.4194.tar.gz

or .deb

https://github.com/BeamMW/beam/releases/download/agile-atom-1.1.4194/Beam-Wallet-1.1.4194.deb

versprichnix

sr. member

Activity: 876

Merit: 291

Quote from: BeamPrivacy on January 18, 2019, 06:11:16 AM

We released Beam's first official maintenance version
https://medium.com/beam-mw/mimblewimble-release-atom-agile-114194-fb4bfee831da

Can you make a wallet tar file for linux, please?

cryptomaxsun

legendary

Activity: 2744

Merit: 1387

Ukrainians will resist

Only 1 pool, no other pools?

RX 480 4 gb, lolminer 0.7 hashrate average 10 sol/s
this is normal?

GaPR

member

Activity: 359

Merit: 13

coinBusiness / Gapur Ozdoev

Quote from: antyivan on January 18, 2019, 04:08:36 PM

How total supply? cmc write 1 744 160 BEAM. it's really?

On the conductor:- "explorer.beam.mw" indicated the total emission: 262,800,000 Beams

JC31

newbie

Activity: 2

Merit: 0

Hi guys,
i tried a transaction of hotbit to my wallet version 1.1.4194 in a "never expire" address. In hotbit the status of transaction is complete, but in the wallet the transaction is failed. What could have happened? Is there any chance of me get back my BEAMs?

Topic: [ANN] BEAM | Mimblewimble | Private | Scalable | No ICO | No Pre Mine - page 50. (Read 77231 times)