[ANN] BEAM | Mimblewimble | Private | Scalable | No ICO | No Pre Mine - page 60.

twente-mining

member

Activity: 176

Merit: 10

Quote from: rgsnedds on January 06, 2019, 02:48:33 PM

I would like to question the integrity of the sparkpool.

I mined on it for a few days (since main net launch) and I've seen rewards far too consistent that it must be the case they are running a massive skim on the miners of beam.

I had been seeing an exact reward of 0.03BEAM, once every 15 mins or so (just a small miner) but there is no way of actually seeing the blocks mined on that pool.
it's nice to see https://beam.sunpool.top showing full disclosure on all rewards/shares and blocks mined.

I've hopped onto there...

The problem i have there is you can't make rignames.
It all has to hang on 1 adress, so for me, with multiple rigs it's a lot difficult to see if all is working fine...
Sparkpool works with rigname's, and the beam's are flying in...

Still waiting for Leafpool to be ready.

Harai Goshi

jr. member

Activity: 36

Merit: 5

Quote from: percenter on January 06, 2019, 02:58:21 PM

I think there is a mistake in the BEAM mining program.
80% of my farms do not show speed on 1 videocard
I have 4 videocards (RX-480) on each farm,
and the miner shows the speed (7-8 sol) only on 3 video cards.
on one of videocard show only 1-2 sol speed.
If I run ETH mining (Claymore v.12), then all video cards work very well.
Does anyone know how to solve this problem?

increase your virtual memory to the 32000 range

rgsnedds

member

Activity: 952

Merit: 17

raskul

Quote from: percenter on January 06, 2019, 02:58:21 PM

I think there is a mistake in the BEAM mining program.
80% of my farms do not show speed on 1 videocard
I have 4 videocards (RX-480) on each farm,
and the miner shows the speed (7-8 sol) only on 3 video cards.
on one of videocard show only 1-2 sol speed.
If I run ETH mining (Claymore v.12), then all video cards work very well.
Does anyone know how to solve this problem?

you could try running separate mining instances for each card...

percenter

newbie

Activity: 34

Merit: 0

I think there is a mistake in the BEAM mining program.
80% of my farms do not show speed on 1 videocard
I have 4 videocards (RX-480) on each farm,
and the miner shows the speed (7-8 sol) only on 3 video cards.
on one of videocard show only 1-2 sol speed.
If I run ETH mining (Claymore v.12), then all video cards work very well.
Does anyone know how to solve this problem?

rgsnedds

member

Activity: 952

Merit: 17

raskul

I would like to question the integrity of the sparkpool.

I mined on it for a few days (since main net launch) and I've seen rewards far too consistent that it must be the case they are running a massive skim on the miners of beam.

I had been seeing an exact reward of 0.03BEAM, once every 15 mins or so (just a small miner) but there is no way of actually seeing the blocks mined on that pool.
it's nice to see https://beam.sunpool.top showing full disclosure on all rewards/shares and blocks mined.

I've hopped onto there...

Lucasgabd

legendary

Activity: 2506

Merit: 1113

There's no need to be upset

Quote from: boomboom on January 05, 2019, 09:23:49 PM

Quote from: Elder III on January 05, 2019, 09:16:50 PM

Quote from: boomboom on January 05, 2019, 08:22:43 PM

Quote from: Lucasgabd on January 05, 2019, 09:37:28 AM

the only pool available is sparkpool?
is it possible to Nicehash it?

Good question ... is nicehash possible to mine Beam?

No you can not mine Beam on Nicehash.

I think there are 3 pools currently, but 2 of them look shady to me.... Leafpool is reportedly testing it now, they would be the 4'th pool that I am aware of.

Thanks, I don't own any mining hardware, is there anywhere to rent some hash to mine beam?

Maybe Mining Rig Rentals?
not fully sure but it includes some algos that we don't have on NH sometimes.

vabrus

newbie

Activity: 2

Merit: 0

Quote from: vabrus on January 06, 2019, 05:28:28 AM

hello

I am mining with this pool ago 12 hours with 1080ti

https://beam.sunpool.top/

Current Hash Rate: 12.79 Sol/s
         1h Average Hash Rate: 18.77 Sol/s
         6h Average Hash Rate: 19.10 Sol/s
         24h Average Hash Rate: 6.21 Sol/s

         Total shares accepted: 539,904
         Invalid shares: 0

         Available balance: 0.00000000 BEAM
         Unconfirmed balance: 0.00000000 BEAM

No withdrawal button, no balance increase...

Is it scam?

Ok, the balance was increased

With a 1080ti 18 hours mining

urrent Hash Rate: 12.79 Sol/s
         1h Average Hash Rate: 16.42 Sol/s
         6h Average Hash Rate: 16.62 Sol/s
         24h Average Hash Rate: 11.33 Sol/s

         Total shares accepted: 983,552
         Invalid shares: 0

         Available balance: 0.37056059 BEAM
         Unconfirmed balance: 0.00000000 BEAM

Salud

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: VoskCoin on January 03, 2019, 11:01:48 PM

https://youtu.be/9UlNfhoRPWU

Here's my video guide on how to mine BEAM, I also have a supportive written guide along w/ a ton of other links in the video description. If you use my link to download the miner, you can simply swap the address w/ yours and start hashing.

If you don't trust me, don't download anything and just watch the video Cheesy

Awesomeness.

CryptoFP

newbie

Activity: 11

Merit: 1

is anyone else having a problem connecting to sparkpool site?

twente-mining

member

Activity: 176

Merit: 10

Quote from: posee on January 06, 2019, 08:15:53 AM

Quote from: twente-mining on January 06, 2019, 07:41:20 AM

No problem here with Sparkpool.

Wallet needs to be online, like they state on the website, then you click on the Extract button on the pool, and the coins move to you're wallet.

It's as simple as that.

They pay out once a day.

edit : Waiting for Leafpool to be ready...

tell me what to click on sparkepool to coins sent to the wallet problem with the language,have registered but do not see where to send

A message will appear once a day ( don't know what time ) on the sparkpool page of you're miner adress.
In the middle you will see it, where there is stated how much BEAM you alreayd have mined.

If it shows, keep wallet open, click it, and the funds will be send to you're wallet.

You don't have to be registerd, i didn't either.

GreenPanda

member

Activity: 172

Merit: 20

After trying the wallet I've got some comments about it:

-Need a confirmation or some pop-up so we cannot delete addresses with 1 misclick.
-It seems that we cannot recover addresses with the mnemonic seed which make me question the purpose of it.
-The address expiration is set for default at 24hours, this isn't a good idea since it is prone to user mistakes/glitches. (I doublechecked the expiration and address before to start mining and it seems like I did a mistake or the expiration setting change by itself to 24 hours when I reopened the wallet later. So I burned 0.5 BEAM)

mitzi101

newbie

Activity: 22

Merit: 1

Quote from: twente-mining on January 06, 2019, 07:41:20 AM

No problem here with Sparkpool.

Wallet needs to be online, like they state on the website, then you click on the Extract button on the pool, and the coins move to you're wallet.

It's as simple as that.

They pay out once a day.

edit : Waiting for Leafpool to be ready...

i know, my wallet was open like their instructions.
but i don't control power company, and computer died.

this is very bad idea the online payment, imagine you pay someone and their wallet offline, you don't get product.
or if someone pay you and your power or internet is bad, you don't get money.

are the coins lost forever or going back to the pool wallet ? will they try payment again or my coins are lost forever ?

posee

newbie

Activity: 5

Merit: 0

Quote from: twente-mining on January 06, 2019, 07:41:20 AM

No problem here with Sparkpool.

Wallet needs to be online, like they state on the website, then you click on the Extract button on the pool, and the coins move to you're wallet.

It's as simple as that.

They pay out once a day.

edit : Waiting for Leafpool to be ready...

tell me what to click on sparkepool to coins sent to the wallet problem with the language,have registered but do not see where to send

twente-mining

member

Activity: 176

Merit: 10

No problem here with Sparkpool.

Wallet needs to be online, like they state on the website, then you click on the Extract button on the pool, and the coins move to you're wallet.

It's as simple as that.

They pay out once a day.

edit : Waiting for Leafpool to be ready...

mitzi101

newbie

Activity: 22

Merit: 1

lost all my coins mining at sparkpool
they demand that the receiver wallet will be online (why is that? its very dumb idea that wallet must be online to get payment)
my computer decided to die (power was down) while i was sleeping, all my coins lost. is this yet another shitty coin ?

allfriends88

full member

Activity: 560

Merit: 100

Quote from: posee on January 06, 2019, 07:03:57 AM

Quote from: vabrus on January 06, 2019, 05:28:28 AM

hello
I am mining with this pool ago 12 hours with 1080ti
https://beam.sunpool.top/
Current Hash Rate: 12.79 Sol/s
         1h Average Hash Rate: 18.77 Sol/s
         6h Average Hash Rate: 19.10 Sol/s
         24h Average Hash Rate: 6.21 Sol/s
         Total shares accepted: 539,904
         Invalid shares: 0
         Available balance: 0.00000000 BEAM
         Unconfirmed balance: 0.00000000 BEAM
No withdrawal button, no balance increase...
Is it scam?

Not quite I think there is a project something but it is very unstable and the price has already started draining, dumping coins on the exchange you can see it

agree, I think the team should do something about this, I think the price is the most important part of the value of the coin, the coin would be most interesting if they keep balanced values tend to increase.

kathlie

newbie

Activity: 17

Merit: 0

BEAM is a great project ,many miners follow it ,need more and more exchange ,because it's not easy to mine. just want to buy

posee

newbie

Activity: 5

Merit: 0

Quote from: vabrus on January 06, 2019, 05:28:28 AM

hello
I am mining with this pool ago 12 hours with 1080ti
https://beam.sunpool.top/
Current Hash Rate: 12.79 Sol/s
         1h Average Hash Rate: 18.77 Sol/s
         6h Average Hash Rate: 19.10 Sol/s
         24h Average Hash Rate: 6.21 Sol/s
         Total shares accepted: 539,904
         Invalid shares: 0
         Available balance: 0.00000000 BEAM
         Unconfirmed balance: 0.00000000 BEAM
No withdrawal button, no balance increase...
Is it scam?

Not quite I think there is a project something but it is very unstable and the price has already started draining, dumping coins on the exchange you can see it

vabrus

newbie

Activity: 2

Merit: 0

hello

I am mining with this pool ago 12 hours with 1080ti

https://beam.sunpool.top/

Current Hash Rate: 12.79 Sol/s
         1h Average Hash Rate: 18.77 Sol/s
         6h Average Hash Rate: 19.10 Sol/s
         24h Average Hash Rate: 6.21 Sol/s

         Total shares accepted: 539,904
         Invalid shares: 0

         Available balance: 0.00000000 BEAM
         Unconfirmed balance: 0.00000000 BEAM

No withdrawal button, no balance increase...

Is it scam?

culexevilman

legendary

Activity: 1064

Merit: 1000

Bitcoin is too valuable to be used as a currency

nice project!

Topic: [ANN] BEAM | Mimblewimble | Private | Scalable | No ICO | No Pre Mine - page 60. (Read 77231 times)