[ANN] BEAM | Mimblewimble | Private | Scalable | No ICO | No Pre Mine - page 55.

ol92

sr. member

Activity: 445

Merit: 255

Quote from: twente-mining on January 10, 2019, 06:15:39 AM

Quote from: BeamPrivacy on January 10, 2019, 06:00:04 AM

About the Vulnerability Team Beam discovered on January 9th, 2019.
https://medium.com/beam-mw/team-beam-discovered-a-critical-vulnerability-in-beam-wallet-658f2c0344e2

Very confusing...

So i installed the new wallet ( 1.0.4028 ), used the paswords to get it working again.

One thing is, the old adress i placed as NEVER now expires tomorrow.
So i made a new adress again with expire NEVER.

So, are the coins i had (have ) send before safe on that adress, or are the going to vanish tomorrow.

Or should i send then to the new NEVER adres in my wallet.

You have downloaded the beta version: I suggest to use the non beta ones.

As said in the medium article, the version number doesn't change with the fix, you may better use the Beam-Wallet-1.0.3976.exe one.

I have no problem with this one : the addresses still show "never" for expiration dates.

wildduck

legendary

Activity: 966

Merit: 1001

Quote from: crypticj on January 10, 2019, 04:34:02 AM

With the rise in difficulty, the coin is already not profitable, the average price of BEAM is around $1.10 which is not sustainable.

for 1080ti average sol/s = 15
for 1070 average sol/s = 9

current Network hashing rate is 2.5Msols/s or 2,500,0000 = 166,666 gtx 1080ti.

Profitability calculations are as follows:

(Miner sols / Network Sols) X (1440 x Reward per block)

1440 min because 1 block generated per min

(15/2,500,000) x(1440x80) = 0.6912 BEAM approx per day per 1080ti =0.76 cents per 1080ti before electricity cost.

Good luck to the project hopefully price will go up.

Mate you need to install new miner - gminer 1.17
My 1060 6Gb = 15 sol

twente-mining

member

Activity: 176

Merit: 10

Quote from: BeamPrivacy on January 10, 2019, 06:00:04 AM

About the Vulnerability Team Beam discovered on January 9th, 2019.
https://medium.com/beam-mw/team-beam-discovered-a-critical-vulnerability-in-beam-wallet-658f2c0344e2

Very confusing...

So i installed the new wallet ( 1.0.4028 ), used the paswords to get it working again.

One thing is, the old adress i placed as NEVER now expires tomorrow.
So i made a new adress again with expire NEVER.

So, are the coins i had (have ) send before safe on that adress, or are the going to vanish tomorrow.

Or should i send then to the new NEVER adres in my wallet.

BeamPrivacy

copper member

Activity: 328

Merit: 3

Beam me up Scotty!

About the Vulnerability Team Beam discovered on January 9th, 2019.
https://medium.com/beam-mw/team-beam-discovered-a-critical-vulnerability-in-beam-wallet-658f2c0344e2

crypticj

sr. member

Activity: 873

Merit: 268

With the rise in difficulty, the coin is already not profitable, the average price of BEAM is around $1.10 which is not sustainable.

for 1080ti average sol/s = 15
for 1070 average sol/s = 9

current Network hashing rate is 2.5Msols/s or 2,500,0000 = 166,666 gtx 1080ti.

Profitability calculations are as follows:

(Miner sols / Network Sols) X (1440 x Reward per block)

1440 min because 1 block generated per min

(15/2,500,000) x(1440x80) = 0.6912 BEAM approx per day per 1080ti =0.76 cents per 1080ti before electricity cost.

Good luck to the project hopefully price will go up.

hesido

jr. member

Activity: 158

Merit: 5

What is the DAA? It's VERY jumpy. It's overshooting and undershooting constantly, and with Beam being probably the most profitable for GPUs by some margin, I find it hard to believe people are constantly reacting to the difficulty (yeah there's still that but I find it strange)..

Also the 10% treasury, well let's say we have a miner with 0 electricity and hardware cost making up 10% of all miners at all times - how is the emission **from** the treasury regulated?

Quote from: percenter on January 09, 2019, 03:16:27 PM

Quote from: hesido on January 09, 2019, 02:07:36 PM

Question for miners, when mining on AMD cards, do you prefer Ethereum-like clock / voltage settings or Cryptonite-like clock settings?

I never change in my MSI Afterburner. I leave as is all settings from ETH. No any different if change or not.

Thanks, I may also try cryptonote favouring clocks if I have the time, will post here if anybody's interested.

Kokolymba

newbie

Activity: 1

Merit: 0

Goodnight
who ever took out with beam.leafpool.com
coins. I have 2 days hanging balance and not displayed on the cat?

cryptolad

newbie

Activity: 131

Merit: 0

Quote from: teaman9 on January 09, 2019, 08:33:23 PM

Quote from: solosequenosenada on January 09, 2019, 07:12:40 AM

Quote from: melpheos on January 09, 2019, 07:08:21 AM

I would like to find another pool but i can see only sparkpool Sad

https://beam.sunpool.top

I am using this , seems better than sparkpool
https://beam.leafpool.com/
https://bitcointalksearch.org/topic/beam-mw-mining-pool-5059995

leafpool has been excellent so far.

teaman9

newbie

Activity: 18

Merit: 0

Quote from: solosequenosenada on January 09, 2019, 07:12:40 AM

Quote from: melpheos on January 09, 2019, 07:08:21 AM

I would like to find another pool but i can see only sparkpool Sad

https://beam.sunpool.top

I am using this , seems better than sparkpool
https://beam.leafpool.com/
https://bitcointalksearch.org/topic/beam-mw-mining-pool-5059995

kcanup

legendary

Activity: 1484

Merit: 1000

What is the .bat line for amd mining? Can anyone help? Thanks in advance.

Edit: got it!

Asthix

newbie

Activity: 10

Merit: 0

Quote from: solosequenosenada on January 09, 2019, 04:17:41 PM

Quote from: Asthix on January 09, 2019, 03:57:11 PM

How do you lower the voltage in the miner for RX 580 cards?
It doesn't seems to accept cvddc and mvddc value and i can only change the power limit, even if i tried to tick the voltage control..

Here is what i get with my rig:
Performance: 8.60 sol/s 6.47 sol/s 8.40 sol/s 8.13 sol/s 9.00 sol/s 8.47 sol/s 7.60 sol/s | Total: 56.67 sol/s

Oscillate between 51 and 57 Sol/s @ 1100/2100 MHz

In windows you can use OverDriveNTool
https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/

Perfect!
Awesome, i even got better power than when i use claymore lol

1270W for 8xRX580 and 3x1060

Thanks a lot Cheesy

Last of the V8s

legendary

Activity: 1652

Merit: 4392

Be a bank

https://www.theblockcrypto.com/tiny/beam-team-critical-vulnerability-found-in-beam-wallet/

solosequenosenada

hero member

Activity: 952

Merit: 542

Freedom dies from suicide

Quote from: Asthix on January 09, 2019, 03:57:11 PM

How do you lower the voltage in the miner for RX 580 cards?
It doesn't seems to accept cvddc and mvddc value and i can only change the power limit, even if i tried to tick the voltage control..

Here is what i get with my rig:
Performance: 8.60 sol/s 6.47 sol/s 8.40 sol/s 8.13 sol/s 9.00 sol/s 8.47 sol/s 7.60 sol/s | Total: 56.67 sol/s

Oscillate between 51 and 57 Sol/s @ 1100/2100 MHz

In windows you can use OverDriveNTool
https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/

Asthix

newbie

Activity: 10

Merit: 0

How do you lower the voltage in the miner for RX 580 cards?
It doesn't seems to accept cvddc and mvddc value and i can only change the power limit, even if i tried to tick the voltage control..

Here is what i get with my rig:
Performance: 8.60 sol/s 6.47 sol/s 8.40 sol/s 8.13 sol/s 9.00 sol/s 8.47 sol/s 7.60 sol/s | Total: 56.67 sol/s

Oscillate between 51 and 57 Sol/s @ 1100/2100 MHz

percenter

newbie

Activity: 34

Merit: 0

Quote from: hesido on January 09, 2019, 02:07:36 PM

Question for miners, when mining on AMD cards, do you prefer Ethereum-like clock / voltage settings or Cryptonite-like clock settings?

I never change in my MSI Afterburner. I leave as is all settings from ETH. No any different if change or not.

hesido

jr. member

Activity: 158

Merit: 5

Question for miners, when mining on AMD cards, do you prefer Ethereum-like clock / voltage settings or Cryptonite-like clock settings?

toogoody

jr. member

Activity: 588

Merit: 1

List of pools: https://miningpoolstats.stream/beam

percenter

newbie

Activity: 34

Merit: 0

Quote from: Andrei16-16 on January 09, 2019, 05:08:06 AM

Oтключeны кaбeля VGA ,DVI ,HDMI
RX470
8.20 sol/s 8.40 sol/s 7.93 sol/s 7.07 sol/s 1.02 sol/s 7.67 sol/s |
B чeм пpoблeмa?

this problem I have too. Miner "opencl-miner-1.0.52.zip" is bad. Wait a new version.

solosequenosenada

hero member

Activity: 952

Merit: 542

Freedom dies from suicide

Quote from: melpheos on January 09, 2019, 07:08:21 AM

I would like to find another pool but i can see only sparkpool Sad

https://beam.sunpool.top

melpheos

jr. member

Activity: 557

Merit: 5

I would like to find another pool but i can see only sparkpool Sad

Topic: [ANN] BEAM | Mimblewimble | Private | Scalable | No ICO | No Pre Mine - page 55. (Read 77231 times)