Why wont you answer me
Hello, i rented a few rigs at Betarigs but on one of the rigs i by mistake i sent more then i supposed to send, amount i sent 0.0217 so i never got any services,
TX: 13ca289bbc48c3314c1cd09352073fd16267a996629090f260b36204aa82812d
address where i sent the payment: 19g9ocMvrqiZ84PMuhGXPGT3eTmyzVsRY5
rental Number: #31337
my username at Betarigs lobo13
Refund address: 1Q9s4FxSiY4xoorh2WwEt4xPoxKdqYVUes
Thank you!
Topic: [ANN] BETARIGS.COM - Cryptocurrency cloud mining - thousands of rigs available! - page 68. (Read 200998 times)
March 22, 2014, 04:38:27 PM
March 22, 2014, 01:45:04 PM
Great to hear this. Next issues:
- my keccak rig is redirected from l68.rigs.eu.betarigs.com to some cryptovein address which obviously has only scrypt coins...
See the above post -- this is now fixed.
Also, if a customer were to mine a non-keccak pool with your keccak miner, that would be entirely the customer's fault and your rig would be paid anyway.
- same rig is now showing rejected shares non-stop and I keep restarting the miner to hopefully fix it [2014-03-22 12:25:02] Rejected e4fbcdbd Diff 1/13 GPU 0 pool 0 (Invalid share)
Guess it was due to cryptovein being scrypt and your miner being Keccak.
March 22, 2014, 01:31:19 PM
Hello,
Thanks to the help of one rig owner, we discovered that a pool recently used on Betarigs (cryptovein.com) was using an uncommon and undocumented stratum command that had a bad side effect.
This had the effect of making the rigs reconnect to another stratum server, completely bypassing Betarigs. Because of that, the mining was never stopped.
So this explains why in Betarigs, it was stuck in "Ends in a few moments" -- we display this label when we do not see the rig anymore, and we weren't seeing the rig anymore, since it was bypassing Betarigs.
This could not have been exploited by customers, as the credentials used on the reconnected stratum servers were the rig owner betarigs credentials. So the customers are not credited with the mining on the reconnected stratum server.
This is now fixed, and for the affected cgminers still mining after end of rental, you just need to reboot them. We have identified 7 rigs affected by this.
Thanks to the help of one rig owner, we discovered that a pool recently used on Betarigs (cryptovein.com) was using an uncommon and undocumented stratum command that had a bad side effect.
This had the effect of making the rigs reconnect to another stratum server, completely bypassing Betarigs. Because of that, the mining was never stopped.
So this explains why in Betarigs, it was stuck in "Ends in a few moments" -- we display this label when we do not see the rig anymore, and we weren't seeing the rig anymore, since it was bypassing Betarigs.
This could not have been exploited by customers, as the credentials used on the reconnected stratum servers were the rig owner betarigs credentials. So the customers are not credited with the mining on the reconnected stratum server.
This is now fixed, and for the affected cgminers still mining after end of rental, you just need to reboot them. We have identified 7 rigs affected by this.
March 22, 2014, 12:02:18 PM
Ah oke. So I'll make as many workers as I need and fill those in on the betarigs page.
Thanks!
Well, it's one worker/pool per rental. You can rent as many rigs as you want, of course.
(am I just stating the obvious here?)
I just rented my first miner to try. Indeed it's just 1 worker.
But it's still not mining, only thing I see in the pool is the diff going up
March 22, 2014, 11:50:55 AM
Ah oke. So I'll make as many workers as I need and fill those in on the betarigs page.
Thanks!
Well, it's one worker/pool per rental. You can rent as many rigs as you want, of course.
(am I just stating the obvious here?)
March 22, 2014, 11:07:37 AM
I've got a couple questions.
If I want to rent a rig. What do I have to give to the owner of the rig?
Stratum adress?
Workers?
pool name?
paymentadress?
Thanks in advance!
If I want to rent a rig. What do I have to give to the owner of the rig?
Stratum adress?
Workers?
pool name?
paymentadress?
Thanks in advance!
You don't give the owner anything. Once you confirm your rental, betarigs will give you an address and the exact amount you need to transfer. On the same page you will find text boxes for the stratum address, worker name and password. Just fill those and wait by your pools dashboard.... you should see the hashes come in
Ah oke. So I'll make as many workers as I need and fill those in on the betarigs page.
Thanks!
March 22, 2014, 10:58:13 AM
I've got a couple questions.
If I want to rent a rig. What do I have to give to the owner of the rig?
Stratum adress?
Workers?
pool name?
paymentadress?
Thanks in advance!
If I want to rent a rig. What do I have to give to the owner of the rig?
Stratum adress?
Workers?
pool name?
paymentadress?
Thanks in advance!
You don't give the owner anything. Once you confirm your rental, betarigs will give you an address and the exact amount you need to transfer. On the same page you will find text boxes for the stratum address, worker name and password. Just fill those and wait by your pools dashboard.... you should see the hashes come in
March 22, 2014, 10:30:26 AM
I've got a couple questions.
If I want to rent a rig. What do I have to give to the owner of the rig?
Stratum adress?
Workers?
pool name?
paymentadress?
Thanks in advance!
If I want to rent a rig. What do I have to give to the owner of the rig?
Stratum adress?
Workers?
pool name?
paymentadress?
Thanks in advance!
March 22, 2014, 10:07:48 AM
Ticket #736399
No one answers?
No one answers?
March 22, 2014, 06:27:05 AM
I have enabled a new rig, now the Betarigs pool gives me work (and I even find blocks!) even when the rig is "Offline" and thus prevents the miner from using the backup pool. I have to manually switch to the backup pool, this prevents normal operations for the future client of the rented contract.
Please look into this.
Please look into this.
Same here. Twice today, my farm has happily continued submitting shares to the renter's pool 2 hours after the rental should have ended, with the status listed as "rented - available in a few moments." This is a deal-breaker until it gets fixed.
Hello,
Thanks to the help of a rig owner, I was able to pinpoint this issue and prevent this to happen again.
Should this happen again, please send us a ticket and we will take time to review this.
Cheers,
Mux
Great to hear this. Next issues:
- my keccak rig is redirected from l68.rigs.eu.betarigs.com to some cryptovein address which obviously has only scrypt coins...
- same rig is now showing rejected shares non-stop and I keep restarting the miner to hopefully fix it [2014-03-22 12:25:02] Rejected e4fbcdbd Diff 1/13 GPU 0 pool 0 (Invalid share)
- another rig for keccak is connected and stable for 10 hours already with no issue
I can't risk providing a bad service for our clients so I scheduled the rig to maintenance mode. Also some people have support tickets open. I am sure you are busy and this is the weekend, but we really appreciated your previous timely communications.
March 22, 2014, 06:17:15 AM
I have enabled a new rig, now the Betarigs pool gives me work (and I even find blocks!) even when the rig is "Offline" and thus prevents the miner from using the backup pool. I have to manually switch to the backup pool, this prevents normal operations for the future client of the rented contract.
Please look into this.
Please look into this.
Same here. Twice today, my farm has happily continued submitting shares to the renter's pool 2 hours after the rental should have ended, with the status listed as "rented - available in a few moments." This is a deal-breaker until it gets fixed.
Hello,
Thanks to the help of a rig owner, I was able to pinpoint this issue and prevent this to happen again.
Should this happen again, please send us a ticket and we will take time to review this.
Cheers,
Mux
March 22, 2014, 01:59:55 AM
I have enabled a new rig, now the Betarigs pool gives me work (and I even find blocks!) even when the rig is "Offline" and thus prevents the miner from using the backup pool. I have to manually switch to the backup pool, this prevents normal operations for the future client of the rented contract.
Please look into this.
Please look into this.
Same here. Twice today, my farm has happily continued submitting shares to the renter's pool 2 hours after the rental should have ended, with the status listed as "rented - available in a few moments." This is a deal-breaker until it gets fixed.
I too had this mysterious ghost mining happen to me earlier. Try getting rid of the "shares : 0" line in the cgminer.config file. Been smooth sailing ever since....
March 22, 2014, 12:15:37 AM
I have enabled a new rig, now the Betarigs pool gives me work (and I even find blocks!) even when the rig is "Offline" and thus prevents the miner from using the backup pool. I have to manually switch to the backup pool, this prevents normal operations for the future client of the rented contract.
Please look into this.
Please look into this.
Same here. Twice today, my farm has happily continued submitting shares to the renter's pool 2 hours after the rental should have ended, with the status listed as "rented - available in a few moments." This is a deal-breaker until it gets fixed.
March 21, 2014, 04:15:35 PM
I have enabled a new rig, now the Betarigs pool gives me work (and I even find blocks!) even when the rig is "Offline" and thus prevents the miner from using the backup pool. I have to manually switch to the backup pool, this prevents normal operations for the future client of the rented contract.
Please look into this.
Please look into this.
March 21, 2014, 01:25:03 PM
SHA-256 Support added!
You can now put your ants, planets and all others Bitcoin asics @ Betarigs
You can now put your ants, planets and all others Bitcoin asics @ Betarigs
You should use "Price/Th/day" not "Price/Gh/day". For 0.0002 BTC/Gh/day is not profitable at all at the current difficulty.
March 21, 2014, 01:23:48 PM
@Mux
hi ! I have a problem, I configured the rig, but it is offline, no one can accept order to rent ...
why?
thanks...
p.s #3521
hi ! I have a problem, I configured the rig, but it is offline, no one can accept order to rent ...
why?
thanks...
p.s #3521
March 21, 2014, 12:49:48 PM
SHA-256 Support added!
You can now put your ants, planets and all others Bitcoin asics @ Betarigs
You can now put your ants, planets and all others Bitcoin asics @ Betarigs
Add http support for solo mining
March 21, 2014, 12:36:26 PM
SHA-256 Support added!
You can now put your ants, planets and all others Bitcoin asics @ Betarigs
You can now put your ants, planets and all others Bitcoin asics @ Betarigs
March 21, 2014, 12:15:51 PM
Looks like there are still issues with fake renters. User "Siewruk" tied my machine up for 10 consecutive rentals, never paying. Just took it offline for maintenance to prevent it from happening 11 times. This is a huge problem!
What is the current timeout period for payment? Did you shorten it from 1 hour?
I thought this issue had been fixed?
Anyone else have this problem?
What is the current timeout period for payment? Did you shorten it from 1 hour?
I thought this issue had been fixed?
Anyone else have this problem?
Hello,
Current timeout period is now 30 minutes (changed a few days ago).
According to his behavior and rental activity besides him, this is a one-off case (only your rig affected), probably a good-willing new user being noobish. Anyhow, he has been blocked.
Mux
March 21, 2014, 11:56:25 AM
Looks like there are still issues with fake renters. User "Siewruk" tied my machine up for 10 consecutive rentals, never paying. Just took it offline for maintenance to prevent it from happening 11 times. This is a huge problem!
What is the current timeout period for payment? Did you shorten it from 1 hour?
I thought this issue had been fixed?
Anyone else have this problem?
http://imgur.com/BpUZp6C
http://i.imgur.com/BpUZp6Cl.png[/img]]
What is the current timeout period for payment? Did you shorten it from 1 hour?
I thought this issue had been fixed?
Anyone else have this problem?
http://imgur.com/BpUZp6C
http://i.imgur.com/BpUZp6Cl.png[/img]]
Jump to: