[ANN] Bitfury ASIC sales in EU and Europe - page 37.

Spathi

newbie

Activity: 50

Merit: 0

Quote from: CTPA on October 23, 2013, 01:26:00 PM

Still concerned and would like some clarification about :

Quote from: CTPA on October 23, 2013, 11:40:03 AM

Also, if I may ask.

Quote from: Jumpsu on October 22, 2013, 07:42:05 AM

I received my order #104X.

)

How can it be that mine 8XX has just been print....? and is estimated to arrived on the 28 of october

Thanks

The date in the tracking email from UPS that you get is pretty much the latest you can expect it.

For example, I got the tracking email today which listed the 28th October as delivery date (I'm in the UK).
However now it is in the UPS system on their website the date has been changed to tomorrow (24th October).

CTPA

newbie

Activity: 20

Merit: 0

Ok thanks for the answer.

I have looked more closely the mail clearly state "UPS SAVER"
but the link to the tracking number given in the mail state "UPS EXPRESS SAVER"

Lets cross finger and hope...
This all Miner thing as been stressfull has days goes by and ROI is clearly getting real bad...

Still concerned and would like some clarification about :

Quote from: CTPA on October 23, 2013, 11:40:03 AM

Also, if I may ask.

Quote from: Jumpsu on October 22, 2013, 07:42:05 AM

I received my order #104X.

)

How can it be that mine 8XX has just been print....? and is estimated to arrived on the 28 of october

Thanks

pbigmoon

newbie

Activity: 59

Merit: 0

Quote from: Gyrsur on October 23, 2013, 12:20:06 PM

Quote from: CTPA on October 23, 2013, 11:40:03 AM

Hi
Punin - I have tried to contact you by mail...

but no luck
My order 8XX was send with UPS SAVER not EXPRESS, please correct while there is still time.

part of received mail from UPS :
   Nombre de colis:   1
   Service UPS:   UPS SAVER
   Poids:   1,0 KGS

guess it is the type you ordered but I was also confused about this.

http://www.bitfurystrikesback.com/product/ups-express-saver-shipping-upgrade/

That is express mine said same and was here in 24 hours.

Normal shipping says standard

Gyrsur

legendary

Activity: 2856

Merit: 1520

Bitcoin Legal Tender Countries: 2 of 206

Quote from: CTPA on October 23, 2013, 11:40:03 AM

Hi
Punin - I have tried to contact you by mail... but no luck
My order 8XX was send with UPS SAVER not EXPRESS, please correct while there is still time.

part of received mail from UPS :
   Nombre de colis:   1
   Service UPS:   UPS SAVER
   Poids:   1,0 KGS

guess it is the type you ordered but I was also confused about this.

http://www.bitfurystrikesback.com/product/ups-express-saver-shipping-upgrade/

CTPA

newbie

Activity: 20

Merit: 0

Hi
Punin - I have tried to contact you by mail... but no luck
My order 8XX was send with UPS SAVER not EXPRESS, please correct while there is still time.

part of received mail from UPS :
Nombre de colis:   1
Service UPS:   UPS SAVER
Poids:   1,0 KGS

Also, if I may ask.

Quote from: Jumpsu on October 22, 2013, 07:42:05 AM

I received my order #104X.

)

How can it be that mine 8XX has just been print....? and is estimated to arrived on the 28 of october

Thanks for your time

rammy2k2

legendary

Activity: 1974

Merit: 1003

i just received tracking from UPS

est date delivery : 30 oct

pbigmoon

newbie

Activity: 59

Merit: 0

Quote from: Spathi on October 23, 2013, 07:23:01 AM

For those who have received orders:

How did you get the tracking number? I'm assuming it might be emailed directly by UPS since I cannot see anywhere on the BFSB site which might display it.

aye UPS email them

Spathi

newbie

Activity: 50

Merit: 0

For those who have received orders:

How did you get the tracking number? I'm assuming it might be emailed directly by UPS since I cannot see anywhere on the BFSB site which might display it.

vs3

hero member

Activity: 622

Merit: 500

Quote from: vs3 on October 17, 2013, 11:41:42 PM

Punin - do you guys plan on selling any more chips?

With bitcoin difficulty shooting through the roof this current pricing is a fantasy and not worth even looking at.

Even if chips get delivered tomorrow and get through assembly in just two weeks (good luck with that) and start hashing on Nov/1 they'll barely make $15 in their entire life ... and that's excluding all possible expenses and having free electricity.

I'm speaking from a system integrator's point and all I can say is that the next two weeks would be the last time ever when those chips could be worth any hassle.
To put those chips to work takes on average another $5-10 per chip in components and other materials alone. And it takes precious time - around 3 weeks at best. You probably don't need me to tell you that - you know better than me the pain of manufacturing stuff. You guys are still shipping stuff that was ordered months ago.

My suggestion to everyone in the bitfury team - unless you want to use them as tiling for your bathroom please throw all remaining quantities for sale as soon as possible.

At $1-$3/chip this would be their last gasp.

Past November/15 you might as well use them as a paper weight.

Let's give the BitFury Gen-1 chips a decent final and not make it another Avalon.

Punin - I never got an answer to that question, and I'd very much like to know what are your near-term plans for chips pricing (and are there any?)

Any answer will be fine with me - things like "chips pricing will not change before X/Y/Z date", or "after X/Y/Z chips will be $/chip" or even "we have no clue right now, we'll think about it after X/Y/Z date", etc.

Any of those is fine - I'm looking for a guidance from you so that I can also make an educated guess and a decision whether or not to attempt manufacturing some more NanoFury devices with your chips.

Ideally a 3-4 weeks advance notice would work the best... And feel free to PM me if you prefer to continue the conversation there or if anything needs clarification or if you have any other questions for me.

Trupik

member

Activity: 136

Merit: 13

Quote from: ktbken on October 22, 2013, 03:55:14 PM

Quote from: xstr8guy on October 22, 2013, 01:45:45 PM

Quote from: Isokivi on October 22, 2013, 12:43:53 PM

Quote from: ktbken on October 22, 2013, 11:28:22 AM

Hi
Received my 2 extra h cards on monday, pluged them in and they have been hashing fine at about 30Ghs each, that is untill this happend just now Shocked

So what is the procedure to get a card replaced ?

I think I see pencil on the R02F. That voids the warranty Sad

Lol, good eye! And it looks like half of the pencil was used.

Pity you are both wrong though Roll Eyes

or have I been doing the pencel mod on the c01R cap between the electrolytic cap and the vr as well ?
flash shadows are a bitch. So enough with no warranty rubbish and instead how about telling me how i go about getting it replaced.
There are several people in this thread who are having issues with the h-cards not performing as they should and so far i have seen very little in the way of help from BFSB. Tbh if somone can tell me the specs of the blown part I will replace it myself as that seems to be the only way to get any sort of speedy resolution, and yes that will invalidate the warrantee such as it is Shocked

Nearly forgot even if i had done some sort of voltage mod the fact that a component blows out before the vr shuts down just points to cheep bad spec components.

My brother got a H-Board that stopped hashing shortly after plugging in. There were no visible damage, but the RPi did not see this card in any slot. My brother then called Punin directly (if you did not throw away the original packaging, the phone number is there somewhere). Punin offered to send a new card immediately against a deposit in BTC. The deposit is to be returned when the faulty card is delivered back to Punin. The replacement card arrived in two days. The faulty one is still in transit somewhere.

So, my advice: if you can speak English, use a phone. It speeds up the process significantly.

karusloom

newbie

Activity: 27

Merit: 0

Quote from: Jumpsu on October 22, 2013, 07:42:05 AM

I received my order #104X.

)

hmm makes me wonder wher's mine #107x Huh

Hey punin take 5 and please give us a litl update

vvhiteknight

member

Activity: 111

Merit: 10

Guys you are a bunch of dicks, this guy is having a big issue with his card and you are being total twats. Either offer help or shut the fuck up.

Also WTF has no one from Bitfury replied to my emails!

ktbken

full member

Activity: 158

Merit: 100

Quote from: xstr8guy on October 22, 2013, 01:45:45 PM

Quote from: Isokivi on October 22, 2013, 12:43:53 PM

Quote from: ktbken on October 22, 2013, 11:28:22 AM

Hi
Received my 2 extra h cards on monday, pluged them in and they have been hashing fine at about 30Ghs each, that is untill this happend just now Shocked

So what is the procedure to get a card replaced ?

I think I see pencil on the R02F. That voids the warranty Sad

Lol, good eye! And it looks like half of the pencil was used.

Pity you are both wrong though Roll Eyes

or have I been doing the pencel mod on the c01R cap between the electrolytic cap and the vr as well ?
flash shadows are a bitch. So enough with no warranty rubbish and instead how about telling me how i go about getting it replaced.
There are several people in this thread who are having issues with the h-cards not performing as they should and so far i have seen very little in the way of help from BFSB. Tbh if somone can tell me the specs of the blown part I will replace it myself as that seems to be the only way to get any sort of speedy resolution, and yes that will invalidate the warrantee such as it is Shocked

Nearly forgot even if i had done some sort of voltage mod the fact that a component blows out before the vr shuts down just points to cheep bad spec components.

pbigmoon

newbie

Activity: 59

Merit: 0

Did everyone get an email from UPS with tracking number?

As i got my order complete emails today but no sign of UPS tracking number yet

Isokivi

hero member

Activity: 910

Merit: 1000

Items flashing here available at btctrinkets.com

Quote from: ?? on ??

doesnt it looks like a wrong way insertion?

No, and I have studied this exstensively:P. The wrong way insertion inflicts similiar blow out damage, but on the last chip on the board.

xstr8guy

hero member

Activity: 784

Merit: 1004

Glow Stick Dance!

Quote from: Isokivi on October 22, 2013, 12:43:53 PM

Quote from: ktbken on October 22, 2013, 11:28:22 AM

Hi
Received my 2 extra h cards on monday, pluged them in and they have been hashing fine at about 30Ghs each, that is untill this happend just now Shocked

So what is the procedure to get a card replaced ?

I think I see pencil on the R02F. That voids the warranty Sad

Lol, good eye! And it looks like half of the pencil was used.

Isokivi

hero member

Activity: 910

Merit: 1000

Items flashing here available at btctrinkets.com

Quote from: ktbken on October 22, 2013, 11:28:22 AM

Hi
Received my 2 extra h cards on monday, pluged them in and they have been hashing fine at about 30Ghs each, that is untill this happend just now Shocked

So what is the procedure to get a card replaced ?

I think I see pencil on the R02F. That voids the warranty Sad

jlsminingcorp

hero member

Activity: 493

Merit: 500

Hooray for non-equilibrium thermodynamics!

Quote from: Gyrsur on October 22, 2013, 11:18:32 AM

Quote from: Humax on October 22, 2013, 09:05:12 AM

I just wanted to thank you for the great service punin!

Wish everybody was more like you. Keep up the good work!

thank you very much also from my side, punin!

you guys set a new standard within the ASIC producer industry which was very important because all subsequent producers have to obey your customer orientation. :-)

Yes, thanks from us too. Your team has done a really good job of delivering and communicating - I love the hardware too!

Unfortunately I'm not as optimistic as Gyrsur about other manufacturers following suit Sad

. We'll see if they can match your performance, but I'm sure that some will disappoint.

ktbken

full member

Activity: 158

Merit: 100

Hi
Received my 2 extra h cards on monday, pluged them in and they have been hashing fine at about 30Ghs each, that is untill this happend just now Shocked

So what is the procedure to get a card replaced ?

Gyrsur

legendary

Activity: 2856

Merit: 1520

Bitcoin Legal Tender Countries: 2 of 206

Quote from: Humax on October 22, 2013, 09:05:12 AM

I just wanted to thank you for the great service punin!

Wish everybody was more like you. Keep up the good work!

thank you very much also from my side, punin!

you guys set a new standard within the ASIC producer industry which was very important because all subsequent producers have to obey your customer orientation. :-)

Topic: [ANN] Bitfury ASIC sales in EU and Europe - page 37. (Read 250482 times)