http://www.bitfurystrikesback.com/product/bfsb-m-board-v2-3/
Is that for the aug/oct H-boards?
if anyone knows would be great
Is that for the aug/oct H-boards?
if anyone knows would be great
AFAIK it is for october H v1.1 & v1.2 boards.
Topic: [ANN] Bitfury ASIC sales in EU and Europe - page 35. (Read 250482 times)
AFAIK it is for october H v1.1 & v1.2 boards.
http://www.bitfurystrikesback.com/product/bfsb-m-board-v2-3/
Is that for the aug/oct H-boards?
if anyone knows would be great
Is that for the aug/oct H-boards?
if anyone knows would be great
I am interested in buying more H boards.
punin, any idea when they will be available in the shop?
punin, any idea when they will be available in the shop?
Have the easter eggs been found yet?
Punin is doing something on the shop site 
H-board are removed. They must be pain in the ass for Niko... He has some m-boards available, but without h-boards there is no point in buying them...
spiccioli
Punin is doing something on the shop site
H-board are removed. They must be pain in the ass for Niko... On MBP site reels are for 15k$ delivered in January. So, prices at 2$/GH level are comming... Producing cost are the same so imagine what profit is on single chip now...
Not bitfury (at least not a lot of risk). It was other people took the most of the risk (if that matters).
You can look up the history through the forums, but in case you don't know where to start - that's a good place:
Details:
(...)
The proposed project is a 100 terahash/s Bitcoin mine. The hashing hardware will consist of mining boards developed in collaboration with BitFury. (...)
(...)
Business plan: http://picostocks.com/businessplan/19
(...)
The proposed project is a 100 terahash/s Bitcoin mine. The hashing hardware will consist of mining boards developed in collaboration with BitFury. (...)
(...)
Business plan: http://picostocks.com/businessplan/19
Punin is doing something on the shop site
H-board are removed. They must be pain in the ass for Niko... On MBP site reels are for 15k$ delivered in January. So, prices at 2$/GH level are comming... Producing cost are the same so imagine what profit is on single chip now...
Would anyone be interested in 7 H-boards 2 from aug and 5 from oct?
Ok seems there's a bit of interest will open own thread tomorrow morning
Punin is doing something on the shop site
H-board are removed. They must be pain in the ass for Niko... On MBP site reels are for 15k$ delivered in January. So, prices at 2$/GH level are comming... Producing cost are the same so imagine what profit is on single chip now...
Would anyone be interested in 7 H-boards 2 from aug and 5 from oct?
A couple of october boards if they're in perfect working condition
Would anyone be interested in 7 H-boards 2 from aug and 5 from oct?
I'd be interested in a couple of h-boards, either version.
Punin is doing something on the shop site
Would anyone be interested in 7 H-boards 2 from aug and 5 from oct?
Punin - do you guys plan on selling any more chips?
With bitcoin difficulty shooting through the roof this current pricing is a fantasy and not worth even looking at.
Even if chips get delivered tomorrow and get through assembly in just two weeks (good luck with that) and start hashing on Nov/1 they'll barely make $15 in their entire life ... and that's excluding all possible expenses and having free electricity.
I'm speaking from a system integrator's point and all I can say is that the next two weeks would be the last time ever when those chips could be worth any hassle.
To put those chips to work takes on average another $5-10 per chip in components and other materials alone. And it takes precious time - around 3 weeks at best. You probably don't need me to tell you that - you know better than me the pain of manufacturing stuff. You guys are still shipping stuff that was ordered months ago.
My suggestion to everyone in the bitfury team - unless you want to use them as tiling for your bathroom please throw all remaining quantities for sale as soon as possible.
At $1-$3/chip this would be their last gasp.
Past November/15 you might as well use them as a paper weight.
Let's give the BitFury Gen-1 chips a decent final and not make it another Avalon.
With bitcoin difficulty shooting through the roof this current pricing is a fantasy and not worth even looking at.
Even if chips get delivered tomorrow and get through assembly in just two weeks (good luck with that) and start hashing on Nov/1 they'll barely make $15 in their entire life ... and that's excluding all possible expenses and having free electricity.
I'm speaking from a system integrator's point and all I can say is that the next two weeks would be the last time ever when those chips could be worth any hassle.
To put those chips to work takes on average another $5-10 per chip in components and other materials alone. And it takes precious time - around 3 weeks at best. You probably don't need me to tell you that - you know better than me the pain of manufacturing stuff. You guys are still shipping stuff that was ordered months ago.
My suggestion to everyone in the bitfury team - unless you want to use them as tiling for your bathroom please throw all remaining quantities for sale as soon as possible.
At $1-$3/chip this would be their last gasp.
Past November/15 you might as well use them as a paper weight.
Let's give the BitFury Gen-1 chips a decent final and not make it another Avalon.
Punin - I never got an answer to that question, and I'd very much like to know what are your near-term plans for chips pricing (and are there any?)
Any answer will be fine with me - things like "chips pricing will not change before X/Y/Z date", or "after X/Y/Z chips will be $/chip" or even "we have no clue right now, we'll think about it after X/Y/Z date", etc.
Any of those is fine - I'm looking for a guidance from you so that I can also make an educated guess and a decision whether or not to attempt manufacturing some more NanoFury devices with your chips.
Ideally a 3-4 weeks advance notice would work the best... And feel free to PM me if you prefer to continue the conversation there or if anything needs clarification or if you have any other questions for me.
Dave at MGP has a reel in stock.
https://bitcointalksearch.org/topic/m.3383857
Two more are being auctioned right now
https://bitcointalksearch.org/topic/wts-for-sale-bitfury-55nm-asic-chips-from-15each-316759
spiccioli
Spicoli - thanks for the link - that one seems dead. The replacement one however seems even better:
https://bitcointalksearch.org/topic/18ths-of-bitfury-asic-bitcoin-mining-chips-for-auction-319965
All I can say is - Well done GalaxyASIC!
What remains to be seen now is if Punin/Dave/etc will take notice ... or end up with some more "very expensive pizzas".
Although ... that's not a bad idea either: http://www.tomshardware.com/news/russia-processor-collection-persian-rugs,10975.html
waiting for news here 
Ok thanks for the answer.
I have looked more closely the mail clearly state "UPS SAVER"
but the link to the tracking number given in the mail state "UPS EXPRESS SAVER"
Lets cross finger and hope...
This all Miner thing as been stressfull has days goes by and ROI is clearly getting real bad...
Still concerned and would like some clarification about :
Thanks
I have looked more closely the mail clearly state "UPS SAVER"
but the link to the tracking number given in the mail state "UPS EXPRESS SAVER"
Lets cross finger and hope...
This all Miner thing as been stressfull has days goes by and ROI is clearly getting real bad...
Still concerned and would like some clarification about :
Also, if I may ask.
I received my order #104X. )
How can it be that mine 8XX has just been print....? and is estimated to arrived on the 28 of october)Thanks
Received my order today, shippement went nice and smoothly :-)
Got 1 hash board HS, "C01L" capacitor isn't present on the board... maybe it is the reason of h-card to be HS...
Contacted Punin has to what to do, but no answers yet.
All other card are hashing away between ~28 and 34ghash/s.
Maybe it has allready been mentionned, but can anyone tell me the legend of stats log
1 AIfDSo 54 2.049 2.135 73 0 0 1 103 [0:0] 687 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
to what parameter those value refer to?
Thanks
Ok thanks for the answer.
I have looked more closely the mail clearly state "UPS SAVER"
but the link to the tracking number given in the mail state "UPS EXPRESS SAVER"
Lets cross finger and hope...
This all Miner thing as been stressfull has days goes by and ROI is clearly getting real bad...
Still concerned and would like some clarification about :
Thanks
I have looked more closely the mail clearly state "UPS SAVER"
but the link to the tracking number given in the mail state "UPS EXPRESS SAVER"
Lets cross finger and hope...
This all Miner thing as been stressfull has days goes by and ROI is clearly getting real bad...
Still concerned and would like some clarification about :
Also, if I may ask.
I received my order #104X. )
How can it be that mine 8XX has just been print....? and is estimated to arrived on the 28 of october)Thanks
Received my order today, shippement went nice and smoothly :-)
Got 1 hash board HS, "C01L" capacitor isn't present on the board... maybe it is the reason of h-card to be HS...
http://
Contacted Punin has to what to do, but no answers yet.
All other card are hashing away between ~28 and 34ghash/s.
Maybe it has allready been mentionned, but can anyone tell me the legend of stats log
1 AIfDSo 54 2.049 2.135 73 0 0 1 103 [0:0] 687 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
to what parameter those value refer to?
Thanks
I ordered six units but got only three SD cards in the package. What a bummer.
What's the easiest way to clone the cards? (Utilizing only one card reader, if possible)
Probably not the easiest way, but I booted from SystemRescueCD and used the dd command. Be careful though - Linux system utils give you enough razor-sharp blades to cut your system to death...What's the easiest way to clone the cards? (Utilizing only one card reader, if possible)
you can use imagewriter in Ubuntu.
I ordered six units but got only three SD cards in the package. What a bummer.
What's the easiest way to clone the cards? (Utilizing only one card reader, if possible)
Probably not the easiest way, but I booted from SystemRescueCD and used the dd command. Be careful though - Linux system utils give you enough razor-sharp blades to cut your system to death... What's the easiest way to clone the cards? (Utilizing only one card reader, if possible)
Hey Punin,
I received my order today.
I noticed that four of the hboards in the full kit still had the caps on which you said you were removing. These boards were marked for slot 4 in each bank.
In the other full kit, none of the boards had the caps.
Is this intended?
I received my order today.
I noticed that four of the hboards in the full kit still had the caps on which you said you were removing. These boards were marked for slot 4 in each bank.
In the other full kit, none of the boards had the caps.
Is this intended?
Yes, those are EOL boards, see https://bitcointalksearch.org/topic/m.3392564 and https://bitcointalksearch.org/topic/m.3390730
spiccioli
Jump to: