Pages:
Author

Topic: [ANN] Catcoin - Scrypt meow! - page 41. (Read 470759 times)

full member
Activity: 210
Merit: 100
January 11, 2014, 06:01:37 PM

And since Cats are not herd animals, I'm going my own damn way and releasing, and it will either be a good test with the hash I bring, or some of you cats might decide to come along and join the p2pool(s) (kittyco.in/p2pool) in search of tasty coinhoppers.

Expect another release and hardfork next Caturday. Cats are agile animals, and this is Agile cryptocoin development. If you want a tested coin, go back to bitcoin, or finance my fiat expenses so I can test this properly on the -testnet.
Could you please clarify your release plans at a newb level?  Are you planning your own personal fork in the 'real world' or are you still testing this?


Additionally - anyone have any idea who keeps killing our difficulty transitions?  This is the first coin I've watched and without a real clue it certainly looks like we're routinely under attack.

I'd think it's pretty common knowledge by now that CAT is suffering from some pretty extreme difficulty oscillation. It could be opportunistic miners, a profit-switching pool, a solo miner with a hashfarm or a combination of the three. Pretty sure a solo miner or pool caused it to begin with though.

I'm gonna give it a shot. I think I know what the problem is.

Give what a shot? I'm lost.
sr. member
Activity: 364
Merit: 250
January 11, 2014, 05:57:40 PM

And since Cats are not herd animals, I'm going my own damn way and releasing, and it will either be a good test with the hash I bring, or some of you cats might decide to come along and join the p2pool(s) (kittyco.in/p2pool) in search of tasty coinhoppers.

Expect another release and hardfork next Caturday. Cats are agile animals, and this is Agile cryptocoin development. If you want a tested coin, go back to bitcoin, or finance my fiat expenses so I can test this properly on the -testnet.
Could you please clarify your release plans at a newb level?  Are you planning your own personal fork in the 'real world' or are you still testing this?


Additionally - anyone have any idea who keeps killing our difficulty transitions?  This is the first coin I've watched and without a real clue it certainly looks like we're routinely under attack.

I'd think it's pretty common knowledge by now that CAT is suffering from some pretty extreme difficulty oscillation. It could be opportunistic miners, a profit-switching pool, a solo miner with a hashfarm or a combination of the three. Pretty sure a solo miner or pool caused it to begin with though.

I'm gonna give it a shot. I think I know what the problem is.
full member
Activity: 210
Merit: 100
January 11, 2014, 05:53:00 PM

And since Cats are not herd animals, I'm going my own damn way and releasing, and it will either be a good test with the hash I bring, or some of you cats might decide to come along and join the p2pool(s) (kittyco.in/p2pool) in search of tasty coinhoppers.

Expect another release and hardfork next Caturday. Cats are agile animals, and this is Agile cryptocoin development. If you want a tested coin, go back to bitcoin, or finance my fiat expenses so I can test this properly on the -testnet.
Could you please clarify your release plans at a newb level?  Are you planning your own personal fork in the 'real world' or are you still testing this?


Additionally - anyone have any idea who keeps killing our difficulty transitions?  This is the first coin I've watched and without a real clue it certainly looks like we're routinely under attack.

I'd think it's pretty common knowledge by now that CAT is suffering from some pretty extreme difficulty oscillation. It could be opportunistic miners, a profit-switching pool, a solo miner with a hashfarm or a combination of the three. Pretty sure a solo miner or pool caused it to begin with though.
hero member
Activity: 657
Merit: 500
January 11, 2014, 05:11:30 PM

And since Cats are not herd animals, I'm going my own damn way and releasing, and it will either be a good test with the hash I bring, or some of you cats might decide to come along and join the p2pool(s) (kittyco.in/p2pool) in search of tasty coinhoppers.

Expect another release and hardfork next Caturday. Cats are agile animals, and this is Agile cryptocoin development. If you want a tested coin, go back to bitcoin, or finance my fiat expenses so I can test this properly on the -testnet.
Could you please clarify your release plans at a newb level?  Are you planning your own personal fork in the 'real world' or are you still testing this?


Additionally - anyone have any idea who keeps killing our difficulty transitions?  This is the first coin I've watched and without a real clue it certainly looks like we're routinely under attack.
full member
Activity: 274
Merit: 100
January 11, 2014, 03:31:35 PM
Guy's, no offense but would it be possible to try and keep this thread on topic. I'd be glad to help any of you out with hardware issues, but this isn't really the thread for it. THat being said, can someone take a look at hozers proposal?

agreed, sorry.  ill PM him with another other questions.
full member
Activity: 274
Merit: 100
January 11, 2014, 03:30:22 PM
Installing new card drivers now. Tense moment as I see whether my PSU can handle two high powered cards.  Undecided

I'm trying to get a new gpu aswell to help with the hash rate, don't know if I should get a 7950, a 280x or a 290, kind of tight on money right now and although it's an investiment with return so I don't know how should I handle this ..

Well, I have it working alongside my GTX 670 now.

The R9 280x provides nice bang for buck, but it runs pretty hot. It's fine though, as they can take the heat, but when it gets to max temp I drop from 700mhash/sec to 635mhash/sec, so realistically to get max performance I'll need to watercool it. It's a bit annoying that I bought the best performing/cheapest R9 280x that I could find, because I'll have to buy a Universal GPU waterblock to cool it now, as it's a non-reference board. Oh well. It'll still be way better than the stock air cooler. A decent 240 radiator should keep it running at 700mhash.  Smiley
 
Nullu have you tried a volt modded bios?  I dropped the core voltage on both of my 280x from 1.2v to 1.1v.  Temps went from 80c down to 70c. it is a surprisingly easy procedure.

Do I have to flash my bios? I'm reluctant to do anything that could cause me to brick my motherboard. Someone suggested I try MSI Afterburner to undervolt.

Do that, i use afterburner to undervolt too.

+1 on Afterburner. I use it to undervolt, and also to control fanspeeds automatically and monitor everything. Best tool I've found so far.

I'm a bit worried about messing with the voltage on my card. The voltage is unlocked, but I know so little about undervolting. I don't want to break my card.

you wont break anything undervolting.  1.1v is pretty safe for a 280x.  the only thing that will happen if the voltage is too low is your PC will lock up.  reboot it if that happens and add another .01v to 1.11 and try again keep adding .1 each time it locks up until it no longer does and that is the lowest voltage your card will run at.
member
Activity: 70
Merit: 10
January 11, 2014, 02:59:43 PM
Guy's, no offense but would it be possible to try and keep this thread on topic. I'd be glad to help any of you out with hardware issues, but this isn't really the thread for it. THat being said, can someone take a look at hozers proposal?
hero member
Activity: 657
Merit: 500
January 11, 2014, 02:49:20 PM
Do I have to flash my bios? I'm reluctant to do anything that could cause me to brick my motherboard. Someone suggested I try MSI Afterburner to undervolt.
Should you feel like flashing at some point in the future, there's a thread on another forum with custom-tweaked mining BIOS files.  They're done by a gent with a good rep in the overclock world as well as the mining world - The Stilt.  There's also some excellent fact-based info on tuning the 79xx/280x cards (no rubber chicken needed!).

Here's the start of the thread:  https://litecointalk.org/index.php?topic=12369.0
Here's one of the 'summary' lists of cards and tuned BIOS files: https://litecointalk.org/index.php?topic=12369.255
The tuning is tailored to the GPU's memory so it's critical to know exactly what's installed on the card.  The Stilt's utility is here: https://www.dropbox.com/s/9de7jtptoqqccyf/Tahiti_GDDR5_Info.zip and TechPowerUp has a utility here: http://www.techpowerup.com/downloads/2326/asus-radeon-memoryinfo-1-005/

Enjoy!
member
Activity: 63
Merit: 10
January 11, 2014, 02:46:06 PM
I'm ordering a 5x 280x rig on monday! Can't wait to set this beast up.

On a side note, there's been a shit ton of buys today
sr. member
Activity: 271
Merit: 254
January 11, 2014, 02:45:29 PM
New Catbox (testing) catcoin release

https://bitbucket.org/dahozer/catcoin
https://bitbucket.org/dahozer/catcoin/downloads/catcoin-0.8.8.tar.gz

Caturday, Jan 11: Silly_Sheeple release:

difficulty adjustment every block, based on last 36 block.
Increase COINBASE_MATURITY.
Play with the coinhoppers before eating them

------------

This is my catbox release of Catcoin, that has been relicensed under the AGPLv3, and includes p2pool (tested) as well as counterpartd(not tested) in the same build tree.

this version DOES A HARDFORK at block 20999 to adjust the difficulty every block, based on the last 36 block average. While this will not fix all the issues with coinhoppers, it's very much like a cat playing with an insect (in our case, a coinhopper) before eating it.

And since Cats are not herd animals, I'm going my own damn way and releasing, and it will either be a good test with the hash I bring, or some of you cats might decide to come along and join the p2pool(s) (kittyco.in/p2pool) in search of tasty coinhoppers.

Expect another release and hardfork next Caturday. Cats are agile animals, and this is Agile cryptocoin development. If you want a tested coin, go back to bitcoin, or finance my fiat expenses so I can test this properly on the -testnet.
hero member
Activity: 532
Merit: 500
January 11, 2014, 02:42:34 PM
Installing new card drivers now. Tense moment as I see whether my PSU can handle two high powered cards.  Undecided

I'm trying to get a new gpu aswell to help with the hash rate, don't know if I should get a 7950, a 280x or a 290, kind of tight on money right now and although it's an investiment with return so I don't know how should I handle this ..

Well, I have it working alongside my GTX 670 now.

The R9 280x provides nice bang for buck, but it runs pretty hot. It's fine though, as they can take the heat, but when it gets to max temp I drop from 700mhash/sec to 635mhash/sec, so realistically to get max performance I'll need to watercool it. It's a bit annoying that I bought the best performing/cheapest R9 280x that I could find, because I'll have to buy a Universal GPU waterblock to cool it now, as it's a non-reference board. Oh well. It'll still be way better than the stock air cooler. A decent 240 radiator should keep it running at 700mhash.  Smiley
 
Nullu have you tried a volt modded bios?  I dropped the core voltage on both of my 280x from 1.2v to 1.1v.  Temps went from 80c down to 70c. it is a surprisingly easy procedure.

Do I have to flash my bios? I'm reluctant to do anything that could cause me to brick my motherboard. Someone suggested I try MSI Afterburner to undervolt.

Do that, i use afterburner to undervolt too.

+1 on Afterburner. I use it to undervolt, and also to control fanspeeds automatically and monitor everything. Best tool I've found so far.

I'm a bit worried about messing with the voltage on my card. The voltage is unlocked, but I know so little about undervolting. I don't want to break my card.
full member
Activity: 168
Merit: 100
January 11, 2014, 02:38:07 PM
Installing new card drivers now. Tense moment as I see whether my PSU can handle two high powered cards.  Undecided

I'm trying to get a new gpu aswell to help with the hash rate, don't know if I should get a 7950, a 280x or a 290, kind of tight on money right now and although it's an investiment with return so I don't know how should I handle this ..

Well, I have it working alongside my GTX 670 now.

The R9 280x provides nice bang for buck, but it runs pretty hot. It's fine though, as they can take the heat, but when it gets to max temp I drop from 700mhash/sec to 635mhash/sec, so realistically to get max performance I'll need to watercool it. It's a bit annoying that I bought the best performing/cheapest R9 280x that I could find, because I'll have to buy a Universal GPU waterblock to cool it now, as it's a non-reference board. Oh well. It'll still be way better than the stock air cooler. A decent 240 radiator should keep it running at 700mhash.  Smiley
 
Nullu have you tried a volt modded bios?  I dropped the core voltage on both of my 280x from 1.2v to 1.1v.  Temps went from 80c down to 70c. it is a surprisingly easy procedure.

Do I have to flash my bios? I'm reluctant to do anything that could cause me to brick my motherboard. Someone suggested I try MSI Afterburner to undervolt.

Do that, i use afterburner to undervolt too.

+1 on Afterburner. I use it to undervolt, and also to control fanspeeds automatically and monitor everything. Best tool I've found so far.
sr. member
Activity: 271
Merit: 254
January 11, 2014, 02:28:04 PM
Still holding CAT; I made the mistake of taking some BTC out to put in RonPaulCoin  Undecided

Rather than take it out of Coinedup, I moved it to Graincoin (GRN).  Has some interesting features (pays interest, gives superblock rewards) that seem to solve some of the problems with retaining miners.  Just had it's IPO on Coinedup.  Anyone else in CAT similarly diversifying?  GRN seems worth putting at least a bit of BTC in…maybe I'll make up some of the BTC I lost on RPC.

I actually started mining grain a few days ago before it hit coinedup. I'm disappointed it hit the exchange this early, however with an active dev and working PoS blocks I'll be buying my share when it's cheap.

Graincoin? So how do I sell grain futures in graincoin?

What the hell does graincoin have to do with grain? We have a corn farmer (me) developing catcoin (https://bitbucket.org/dahozer/catcoin ), and graincoin is... um.. another premined altcopycoin? They could have at least tried to index to commodity grain prices or something creative. I'm at least going to try to release a future version of Catcoin that adjusts the amount of coins in circulation until 1 catcoin is about the lifetime cost to the human to be owned by a cat.
full member
Activity: 274
Merit: 100
January 11, 2014, 02:27:28 PM
Installing new card drivers now. Tense moment as I see whether my PSU can handle two high powered cards.  Undecided

I'm trying to get a new gpu aswell to help with the hash rate, don't know if I should get a 7950, a 280x or a 290, kind of tight on money right now and although it's an investiment with return so I don't know how should I handle this ..

Well, I have it working alongside my GTX 670 now.

The R9 280x provides nice bang for buck, but it runs pretty hot. It's fine though, as they can take the heat, but when it gets to max temp I drop from 700mhash/sec to 635mhash/sec, so realistically to get max performance I'll need to watercool it. It's a bit annoying that I bought the best performing/cheapest R9 280x that I could find, because I'll have to buy a Universal GPU waterblock to cool it now, as it's a non-reference board. Oh well. It'll still be way better than the stock air cooler. A decent 240 radiator should keep it running at 700mhash.  Smiley
 
Nullu have you tried a volt modded bios?  I dropped the core voltage on both of my 280x from 1.2v to 1.1v.  Temps went from 80c down to 70c. it is a surprisingly easy procedure.

Do I have to flash my bios? I'm reluctant to do anything that could cause me to brick my motherboard. Someone suggested I try MSI Afterburner to undervolt.

some are factory unlocked and that might work mine was not I had to flash it yes.  as I was trying to find the lowest voltage the card would run at stable I must have flashed each card over a dozen times. the process seems very safe but I guess technically there is always a very small chance of a brick but I myself I not worried about that.  only way that could happen is if you kill the power during the flash which only takes 60 seconds or less, but I understand your fear Smiley

saving 10° C though, both of my cards say "thank you" to me each time I walk past them.  its very faint but I can hear their whisper.

for the record I run ASUS 280x
newbie
Activity: 41
Merit: 0
January 11, 2014, 02:26:48 PM
Installing new card drivers now. Tense moment as I see whether my PSU can handle two high powered cards.  Undecided

I'm trying to get a new gpu aswell to help with the hash rate, don't know if I should get a 7950, a 280x or a 290, kind of tight on money right now and although it's an investiment with return so I don't know how should I handle this ..

Well, I have it working alongside my GTX 670 now.

The R9 280x provides nice bang for buck, but it runs pretty hot. It's fine though, as they can take the heat, but when it gets to max temp I drop from 700mhash/sec to 635mhash/sec, so realistically to get max performance I'll need to watercool it. It's a bit annoying that I bought the best performing/cheapest R9 280x that I could find, because I'll have to buy a Universal GPU waterblock to cool it now, as it's a non-reference board. Oh well. It'll still be way better than the stock air cooler. A decent 240 radiator should keep it running at 700mhash.  Smiley
 
Nullu have you tried a volt modded bios?  I dropped the core voltage on both of my 280x from 1.2v to 1.1v.  Temps went from 80c down to 70c. it is a surprisingly easy procedure.

Do I have to flash my bios? I'm reluctant to do anything that could cause me to brick my motherboard. Someone suggested I try MSI Afterburner to undervolt.

Do that, i use afterburner to undervolt too.
hero member
Activity: 532
Merit: 500
January 11, 2014, 02:19:55 PM
Installing new card drivers now. Tense moment as I see whether my PSU can handle two high powered cards.  Undecided

I'm trying to get a new gpu aswell to help with the hash rate, don't know if I should get a 7950, a 280x or a 290, kind of tight on money right now and although it's an investiment with return so I don't know how should I handle this ..

Well, I have it working alongside my GTX 670 now.

The R9 280x provides nice bang for buck, but it runs pretty hot. It's fine though, as they can take the heat, but when it gets to max temp I drop from 700mhash/sec to 635mhash/sec, so realistically to get max performance I'll need to watercool it. It's a bit annoying that I bought the best performing/cheapest R9 280x that I could find, because I'll have to buy a Universal GPU waterblock to cool it now, as it's a non-reference board. Oh well. It'll still be way better than the stock air cooler. A decent 240 radiator should keep it running at 700mhash.  Smiley
 
Nullu have you tried a volt modded bios?  I dropped the core voltage on both of my 280x from 1.2v to 1.1v.  Temps went from 80c down to 70c. it is a surprisingly easy procedure.

Do I have to flash my bios? I'm reluctant to do anything that could cause me to brick my motherboard. Someone suggested I try MSI Afterburner to undervolt.
full member
Activity: 274
Merit: 100
January 11, 2014, 02:07:06 PM
Installing new card drivers now. Tense moment as I see whether my PSU can handle two high powered cards.  Undecided

I'm trying to get a new gpu aswell to help with the hash rate, don't know if I should get a 7950, a 280x or a 290, kind of tight on money right now and although it's an investiment with return so I don't know how should I handle this ..

Well, I have it working alongside my GTX 670 now.

The R9 280x provides nice bang for buck, but it runs pretty hot. It's fine though, as they can take the heat, but when it gets to max temp I drop from 700mhash/sec to 635mhash/sec, so realistically to get max performance I'll need to watercool it. It's a bit annoying that I bought the best performing/cheapest R9 280x that I could find, because I'll have to buy a Universal GPU waterblock to cool it now, as it's a non-reference board. Oh well. It'll still be way better than the stock air cooler. A decent 240 radiator should keep it running at 700mhash.  Smiley
 
Nullu have you tried a volt modded bios?  I dropped the core voltage on both of my 280x from 1.2v to 1.1v.  Temps went from 80c down to 70c. it is a surprisingly easy procedure.
hero member
Activity: 532
Merit: 500
January 11, 2014, 01:37:20 PM
Still holding CAT; I made the mistake of taking some BTC out to put in RonPaulCoin  Undecided

Rather than take it out of Coinedup, I moved it to Graincoin (GRN).  Has some interesting features (pays interest, gives superblock rewards) that seem to solve some of the problems with retaining miners.  Just had it's IPO on Coinedup.  Anyone else in CAT similarly diversifying?  GRN seems worth putting at least a bit of BTC in…maybe I'll make up some of the BTC I lost on RPC.

I actually started mining grain a few days ago before it hit coinedup. I'm disappointed it hit the exchange this early, however with an active dev and working PoS blocks I'll be buying my share when it's cheap.
member
Activity: 112
Merit: 10
January 11, 2014, 01:33:08 PM
Still holding CAT; I made the mistake of taking some BTC out to put in RonPaulCoin  Undecided

Rather than take it out of Coinedup, I moved it to Graincoin (GRN).  Has some interesting features (pays interest, gives superblock rewards) that seem to solve some of the problems with retaining miners.  Just had it's IPO on Coinedup.  Anyone else in CAT similarly diversifying?  GRN seems worth putting at least a bit of BTC in…maybe I'll make up some of the BTC I lost on RPC.
newbie
Activity: 35
Merit: 0
January 11, 2014, 01:18:50 PM
guys help me save time (I would like to avoid reading 300 pages.)
I'm trying to sync catcoind and I always reach this block: 20290
I tried several nodes and it is always the same, the reason I guess is the fork. Can you give me some recent nodes that would allow me to sync with the correct fork?
this is the list I use right now:

addnode=eu.coinium.org:9933
addnode=us.coinium.org:9933
addnode=teamcatcoin.com:9933
addnode=108.54.144.63:9933
addnode=209.162.15.139:9933
addnode=94.134.24.71:9933
addnode=188.230.218.60:9933
addnode=123.211.181.88:9933
addnode=172.245.21.138:9933
addnode=50.162.94.94:9933
I don't know about the nodes, but do you have the latest wallet installed ? I just installed it and it syncs fine.
The link is in the OP post.
Pages:
Jump to: