Topic: [ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 10. (Read 500193 times)
Hello Epsylon3. Can you improove PHI algo speed up to the same as sp-mod miner?
@Epsylon3: I think I've spotted bug. I'm using your miner under Linux. When your miner on C11 algo calling nvidia-smi is extremely slow and nvidia-settings hangs. There is no such problem on trupvot version, but it's lot slower...
Ok, but this IS tpruvot's version thread...
Oh indeed! I've followed link on alexis78 github page. Thx and sorry for this!
@Epsylon3: I think I've spotted bug. I'm using your miner under Linux. When your miner on C11 algo calling nvidia-smi is extremely slow and nvidia-settings hangs. There is no such problem on trupvot version, but it's lot slower...
Ok, but this IS tpruvot's version thread...
@Epsylon3: I think I've spotted bug. I'm using your miner under Linux. When your miner on C11 algo calling nvidia-smi is extremely slow and nvidia-settings hangs. There is no such problem on trupvot version, but it's lot slower...
Why is RVN consistently 10% less then the estimated profit? I understand it's a estimate, but I've been watching it for close to a week and it's always 10% less. Actual should be based on averaged profit over a day (taking into account stales, luck, orphans etc), estimated is never lower then the actual (for variance) and there aren't any orphans. Is pool luck always 10% less? That would be weird if the case.
when I use "ccminer alexis HSR cuda 8" rig doesnt shut down.
when I use ccminer 2.2.x and temp goes up to 40C so rig goes down. liguid cooling is only on gtx 1080ti aorus. CCminer shows temp and 0RPM adn iThink that in ccminer is any control to running fan, isnt it?
To have ccminer control fans would be an awesome feature.
-sf-
when I use ccminer 2.2.x and temp goes up to 40C so rig goes down. liguid cooling is only on gtx 1080ti aorus. CCminer shows temp and 0RPM adn iThink that in ccminer is any control to running fan, isnt it?
Hi ,
I would like to ask you if this ccminer have any control to fan is running?
I would like to ask you if this ccminer have any control to fan is running?
To have ccminer control fans would be an awesome feature.
-sf-
Hi ,
I would like to ask you if this ccminer have any control to fan is running?
I would like to ask you if this ccminer have any control to fan is running?
To have ccminer control fans would be an awesome feature.
-sf-
Epsylon3 dear dev does ccminer 2.2.4 support BTG mining 
I'm trying to mine on suprnova
ccminer-x64.exe -a equihash -o stratum+tcp://btg.suprnova.cc:8816 -u username.worker1 -p x -d 0,1,2,4,5,6,7
miner program says
Unsupported extranonce size of 16 (12 maxi)
Stratum subscribe answer id is not correct
and please tell me what speed can I achieve with BTG mining? When I run --benchmark it shows 340 sols/s on GTX 1070
I'm trying to mine on suprnova ccminer-x64.exe -a equihash -o stratum+tcp://btg.suprnova.cc:8816 -u username.worker1 -p x -d 0,1,2,4,5,6,7
miner program says
Unsupported extranonce size of 16 (12 maxi)
Stratum subscribe answer id is not correct
and please tell me what speed can I achieve with BTG mining? When I run --benchmark it shows 340 sols/s on GTX 1070
my system windows 10 64 bit and gtx 1080ti which best perfonmans ccminerx64 or ccminerx32?
Hi ,
I would like to ask you if this ccminer have any control to fan is running? Is possible to switch off this security?
I have water cooling for gpu (without fan) and when I start ccminer so my rig restarts with fan failure.
tahnks for help
I would like to ask you if this ccminer have any control to fan is running? Is possible to switch off this security?
I have water cooling for gpu (without fan) and when I start ccminer so my rig restarts with fan failure.
tahnks for help
its the coma to give different values per card, like -i 20,19
Is there a way to put --bfactor=10 for -d 0 and --bfactor=6 for -d 1 ect. on cryptonight algo?
EDIT: Or can I use intensity settings?
EDIT: Or can I use intensity settings?
Yes you can. See below.
You can use -i 8 for setting intensity to 8.
I've seen ccminer is not good when running it with multiple cards.
So, Make different .bat files for each GPU.
Then you can set everything for just one card with them, and run them
on different cmd or terminal windows.
Is there a way to put --bfactor=10 for -d 0 and --bfactor=6 for -d 1 ect. on cryptonight algo?
EDIT: Or can I use intensity settings?
EDIT: Or can I use intensity settings?
I'm using v2.2.3 to mine Tribus with my 1080's but I'm getting "did not validate on cpu" errors at -i 20.
Looking at zpool's benchmark tab, I see everyone using -i 20 with their 1080's but they're all on v2.2.2 or 2.2.1. Would it make a difference or do I just have dodgy GPUs?
Setting -i 19 solves it, but I lose a good 10-15MH/s per card...
Looking at zpool's benchmark tab, I see everyone using -i 20 with their 1080's but they're all on v2.2.2 or 2.2.1. Would it make a difference or do I just have dodgy GPUs?
Setting -i 19 solves it, but I lose a good 10-15MH/s per card...
use -i 19.9
I'm using v2.2.3 to mine Tribus with my 1080's but I'm getting "did not validate on cpu" errors at -i 20.
Looking at zpool's benchmark tab, I see everyone using -i 20 with their 1080's but they're all on v2.2.2 or 2.2.1. Would it make a difference or do I just have dodgy GPUs?
Setting -i 19 solves it, but I lose a good 10-15MH/s per card...
Looking at zpool's benchmark tab, I see everyone using -i 20 with their 1080's but they're all on v2.2.2 or 2.2.1. Would it make a difference or do I just have dodgy GPUs?
Setting -i 19 solves it, but I lose a good 10-15MH/s per card...
How much is dev fee in ccminer?
0 its not a trojan
Well, except if you run SP mods 
Hi,
I'm mining with equihash algorithm on 3 x 1060.
--plimit is not working without applying mem-clock and gpu-clock.
And I can't apply application clocks on 1060 with driver 384.111 (max stable current).
It's changing just one GPU's Power limit but GPU is already not using that much power when I run it.
Also GPU utilizations aren't 100% or 99%. Max ~90% or lower.
I compared clocks with other miners.
nvidia-smi --query-gpu=index,timestamp,power.draw,clocks.sm,clocks.mem,clocks.gr --format=csv -l 1
And clocks are same, but Sol rate is lower.
I've tested Sol rates based on their accepted share rates in a day:
https://github.com/cosmicog/flypool_info (Currents are weird because I stopped those miners after a while)
It's not so bad and I believe with improvements, It can do better.
I forked project, did just few improvements on equi-stratum.cpp file. But it just improves shares a bit.
But I don't have a time for others now.
I think, Latest drivers are making clockrate changes automatically, like pstates.
And with some workaround, it can really do better by wanting more than its need from GPU.
I'm mining with equihash algorithm on 3 x 1060.
--plimit is not working without applying mem-clock and gpu-clock.
And I can't apply application clocks on 1060 with driver 384.111 (max stable current).
It's changing just one GPU's Power limit but GPU is already not using that much power when I run it.
Also GPU utilizations aren't 100% or 99%. Max ~90% or lower.
I compared clocks with other miners.
nvidia-smi --query-gpu=index,timestamp,power.draw,clocks.sm,clocks.mem,clocks.gr --format=csv -l 1
And clocks are same, but Sol rate is lower.
I've tested Sol rates based on their accepted share rates in a day:
https://github.com/cosmicog/flypool_info (Currents are weird because I stopped those miners after a while)
It's not so bad and I believe with improvements, It can do better.
I forked project, did just few improvements on equi-stratum.cpp file. But it just improves shares a bit.
But I don't have a time for others now.
I think, Latest drivers are making clockrate changes automatically, like pstates.
And with some workaround, it can really do better by wanting more than its need from GPU.
"Cuda error in func 'cuda_check_cpu_setTarget' at line 41 : unspecified launch failure."
HLP PLS?
GTX 1060's. Not mining with CPU. I've tried lowering my plimit but that didn't help.
Any ideas? Thanks
HLP PLS?
GTX 1060's. Not mining with CPU. I've tried lowering my plimit but that didn't help.
Any ideas? Thanks
Well it seems it is about your overclocking usually.
So try not only set down your powerlimit, but try to set lower clock for your gpu.
And one more point, could you check if you have the latest NVidia driver, well, you know, just in case.
0 its not a trojan
How much is dev fee in ccminer?
Jump to: