Hello Friends.. getting a little problem with ccminer alexis.. i think this is the right tread.. sorry if not...
Some kind of Memory or CPU error...
https://imgur.com/a/4owgass
When I switch the HDMI cable to another GPU... error goes to the next GPU as shown below..
https://imgur.com/a/lAKRsHl
My build:
Asrock H81 Pro BTC
Processor Intel Celeron G1840
4gb RAM
850w PSU 2x
I`m getting this same error on both my rigs with same build mentioned above. Any help appreciated. Thanks !
ps. on my gaming rig I have 7th gen i3 processor, 8gb ram, and it run alexis miner smooth no problem.. with awesome speed..
Topic: [ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 8. (Read 500257 times)
tlimit is windows only, a "driver" setting to throttle, the other one do pauses in mining to cool down
What are the difference between "--max-temp=N" and "--tlimit=N"?
Can they work together?
Can they work together?
When will be the updated faster phi miner available?
ccMiner is the best GPU out there! Thank you!!! 
Error when build tpruvot/ccminer on my Debian 5.0.10:
Code:
g++ -DHAVE_CONFIG_H -I. -fopenmp -pthread -fno-strict-aliasing -I./compat/jansson -I/usr/local/cuda-5.5/include -g -O2 -MT ccminer-ccminer.o -MD -MP -MF .deps/ccminer-ccminer.Tpo -c -o ccminer-ccminer.o `test -f 'ccminer.cpp' || echo './'`ccminer.cpp
ccminer.cpp:1: error: stray ‘\357’ in program
ccminer.cpp:1: error: stray ‘\273’ in program
ccminer.cpp:1: error: stray ‘\277’ in program
make[2]: *** [ccminer-ccminer.o] Error 1
ccminer.cpp:1: error: stray ‘\357’ in program
ccminer.cpp:1: error: stray ‘\273’ in program
ccminer.cpp:1: error: stray ‘\277’ in program
make[2]: *** [ccminer-ccminer.o] Error 1
Is anyone having an issue with Lyra2z on a Titan V (Volta) card? Since the 2.2.5 update my rate is down 60%, if I launch version 2.2.4 my hash rates are back to normal and being accepted.
2.2.4 rate: 7.01MH/s
2.2.5 rate: 3.10MH/s
Thanks, I like 2.2.5's support for x16r!
2.2.4 rate: 7.01MH/s
2.2.5 rate: 3.10MH/s
Thanks, I like 2.2.5's support for x16r!
Did you try with
Quote
--submit-stale
Is anyone having an issue with Lyra2z on a Titan V (Volta) card? Since the 2.2.5 update my rate is down 60%, if I launch version 2.2.4 my hash rates are back to normal and being accepted.
2.2.4 rate: 7.01MH/s
2.2.5 rate: 3.10MH/s
Thanks, I like 2.2.5's support for x16r!
2.2.4 rate: 7.01MH/s
2.2.5 rate: 3.10MH/s
Thanks, I like 2.2.5's support for x16r!
.
cant reproduce
[2018-04-04 08:09:51] neoscrypt block 2403589, diff 14.042
[2018-04-04 08:09:58] GPU #0: GeForce GTX 1060 3GB, 603.14 kH/s
[2018-04-04 08:09:58] accepted: 33/33 (diff 0.001), 605.28 kH/s yes!
[2018-04-04 08:10:01] accepted: 34/34 (diff 0.003), 605.01 kH/s yes!
[2018-04-04 08:12:38] phi block 3511, diff 634.486
[2018-04-04 08:12:39] GPU #0: Intensity set to 20, 1048576 cuda threads
[2018-04-04 08:12:39] GPU #0: GeForce GTX 1060 3GB, 7037.20 kH/s
[2018-04-04 08:12:43] GPU #0: GeForce GTX 1060 3GB, 11.09 MH/s
[2018-04-04 08:12:43] accepted: 1/1 (diff 0.017), 9065.71 kH/s yes!
[2018-04-04 08:12:45] accepted: 2/2 (diff 0.026), 9747.96 kH/s yes!
[2018-04-04 08:12:53] GPU #0: GeForce GTX 1060 3GB, 11.07 MH/s
You know, I spent hours (days really by now) trying to get ccminer to work. Always compiles, never runs. [2018-04-04 08:09:51] neoscrypt block 2403589, diff 14.042
[2018-04-04 08:09:58] GPU #0: GeForce GTX 1060 3GB, 603.14 kH/s
[2018-04-04 08:09:58] accepted: 33/33 (diff 0.001), 605.28 kH/s yes!
[2018-04-04 08:10:01] accepted: 34/34 (diff 0.003), 605.01 kH/s yes!
[2018-04-04 08:12:38] phi block 3511, diff 634.486
[2018-04-04 08:12:39] GPU #0: Intensity set to 20, 1048576 cuda threads
[2018-04-04 08:12:39] GPU #0: GeForce GTX 1060 3GB, 7037.20 kH/s
[2018-04-04 08:12:43] GPU #0: GeForce GTX 1060 3GB, 11.09 MH/s
[2018-04-04 08:12:43] accepted: 1/1 (diff 0.017), 9065.71 kH/s yes!
[2018-04-04 08:12:45] accepted: 2/2 (diff 0.026), 9747.96 kH/s yes!
[2018-04-04 08:12:53] GPU #0: GeForce GTX 1060 3GB, 11.07 MH/s
Tried different CUDA versions (8, 9.1), drivers, several releases and master branch, lots of forks, even thought about switching gcc around.
Always the scanhash or init functions, probably for all algos (haven't tested all).
Klaus ccminer works (8.20), though doesn't have all algos.
I have no idea anymore what could be wrong!
Thanks for the good work though, seems to run fine for a lot of people.
I'm having a similar issue, can't get any miner with x16s to work with a GTX660, is there anything that can be done?
i pushed a cryptonight branch which require some cleanup and regression tests (about perfs)... else no, dont ask, no binary.. I dont work on windows
im still confused the hard work was made by an "old" sgminer dev :p
im still confused the hard work was made by an "old" sgminer dev :p
MY EVGA 750ti SC CARDS GET 210H/s--
This is at least a 5% performance improvement. Prior, my 6x 750ti SC (single fan cards) rig earned 1130H/s, now it hashes at 1260H/s. All cards hash at 210H/s +/-3, prior they varied from 178H/s to 200H/s. Still slower than XMR-Stak, but easier to run. --scryptr
i pushed a cryptonight branch which require some cleanup and regression tests (about perfs)... else no, dont ask, no binary.. I dont work on windows
im still confused the hard work was made by an "old" sgminer dev :p
im still confused the hard work was made by an "old" sgminer dev :p
it supports it with a hotfix. In ethos, update miner and run: sudo hotfix ccminer-xmr7
Add the following to your config: ccminer=flags -a monero
and you should be good to go. For other linux or windows versions, the hotfix may or may not work (maybe google based on your OS), but for cc the algo flag is monero, not pow7 or cryptonight7.
Add the following to your config: ccminer=flags -a monero
and you should be good to go. For other linux or windows versions, the hotfix may or may not work (maybe google based on your OS), but for cc the algo flag is monero, not pow7 or cryptonight7.
Cryptonight V7 support.please! 
Any chance to add Cryptonight V7 support?
no
Hey, Epsylon3!
Any chance to add and rewrite/optimized Xevan algo?
Any chance to add and rewrite/optimized Xevan algo?
i switched to another miner.
ccminer not working with v7.
ccminer not working with v7.
5 hours in v7!
MONERO UPDATE:
Approximately the 6th of April there will be a scheduled network upgrade on the Monero network (at block 1546000). PoW tweak to curb any potential threat of ASICs and preserve ASIC resistance. Miners will have to update their miners!
it seems like the upgrade done.
Jump to: