Hello! I just got into Chaincoin at 3$ and bought some even at 5$. Now it's about 2.4$, but I hope it to rise to more than 10$.
I also started to mine this coin at 17.5Mh/s with my underclocked ( to keep them under 70C) 1060&1070. I have high hopes for chaincoin!
Topic: [ANN] [CHC] Chaincoin - Network Upgrade 16.1 - SegWit Activated - page 111. (Read 321715 times)
July 15, 2017, 03:12:55 AM
July 15, 2017, 02:53:26 AM
CHC/BTC
ChainCoin
-53.57%
0.00130000
CHC/LTC
ChainCoin
-52.14%
0.07600000
CHC/DOGE
ChainCoin
-62.27%
1500.00000000
CHC/USDT
ChainCoin
-69.23%
2.00000000
CHC/NZDT
ChainCoin
-82.34% On all fronts, you lose an investor ....
ChainCoin
-53.57%
0.00130000
CHC/LTC
ChainCoin
-52.14%
0.07600000
CHC/DOGE
ChainCoin
-62.27%
1500.00000000
CHC/USDT
ChainCoin
-69.23%
2.00000000
CHC/NZDT
ChainCoin
-82.34% On all fronts, you lose an investor ....
hilarious. This is just the beginning of a rise. Went from 6 cents to $6+ in few days only to drop to $3. That's an accomplishment. There's bound to be dumpers who bought high and get antsy when their sell orders aren't filled trying to make a quick buck. It's just how it is. All rises fall to extent.
It's perfect time to buy now. If you look at the charts the spike to $6+ happened less than a day. I'm fine with $3.. You should have invested early on. Learn to follow where a good entry point is looking at charts. It's around .0011 ish if you want in...
July 15, 2017, 02:42:57 AM
Hello guys! My masternode can't start anymore.
Not capable masternode: Could not find suitable coins!
What's wrong?
It worked for few days, I have Windows 0.9.2.4 client, proper config file, portforwarding on router, masternode key and 1000 CHC amount on wallet CY4UJxpigv9C2sVPsCsR8zSBaxt966RzZn with enough confirmations.
When balance was exactly 1000 CHC - masternode worked.
I made some deposits to this wallet - balance was >1000 CHC - masternode worked.
I made some transactions from this wallet - balance is exactly 1000 CHC - masternode start - "not capable masternode: Could not find suitable coins!"
How to make it work?
Not capable masternode: Could not find suitable coins!
What's wrong?
It worked for few days, I have Windows 0.9.2.4 client, proper config file, portforwarding on router, masternode key and 1000 CHC amount on wallet CY4UJxpigv9C2sVPsCsR8zSBaxt966RzZn with enough confirmations.
When balance was exactly 1000 CHC - masternode worked.
I made some deposits to this wallet - balance was >1000 CHC - masternode worked.
I made some transactions from this wallet - balance is exactly 1000 CHC - masternode start - "not capable masternode: Could not find suitable coins!"
How to make it work?
You need exactly 1000 CHC in your wallet. No more or no less. Can't have 1000.14..
You need 15 confirmation.
July 15, 2017, 02:42:22 AM
DEV., what are your plans? Otherwise you will all be dropped
July 15, 2017, 02:37:23 AM
Hello guys! My masternode can't start anymore.
Not capable masternode: Could not find suitable coins!
What's wrong?
It worked for few days, I have Windows 0.9.2.4 client, proper config file, portforwarding on router, masternode key and 1000 CHC amount on wallet CY4UJxpigv9C2sVPsCsR8zSBaxt966RzZn with enough confirmations.
When balance was exactly 1000 CHC - masternode worked.
I made some deposits to this wallet - balance was >1000 CHC - masternode worked.
I made some transactions from this wallet - balance is exactly 1000 CHC - masternode start - "not capable masternode: Could not find suitable coins!"
How to make it work?
Not capable masternode: Could not find suitable coins!
What's wrong?
It worked for few days, I have Windows 0.9.2.4 client, proper config file, portforwarding on router, masternode key and 1000 CHC amount on wallet CY4UJxpigv9C2sVPsCsR8zSBaxt966RzZn with enough confirmations.
When balance was exactly 1000 CHC - masternode worked.
I made some deposits to this wallet - balance was >1000 CHC - masternode worked.
I made some transactions from this wallet - balance is exactly 1000 CHC - masternode start - "not capable masternode: Could not find suitable coins!"
How to make it work?
July 15, 2017, 02:37:05 AM
CHC/BTC
ChainCoin
-53.57%
0.00130000
CHC/LTC
ChainCoin
-52.14%
0.07600000
CHC/DOGE
ChainCoin
-62.27%
1500.00000000
CHC/USDT
ChainCoin
-69.23%
2.00000000
CHC/NZDT
ChainCoin
-82.34% On all fronts, you lose an investor ....
ChainCoin
-53.57%
0.00130000
CHC/LTC
ChainCoin
-52.14%
0.07600000
CHC/DOGE
ChainCoin
-62.27%
1500.00000000
CHC/USDT
ChainCoin
-69.23%
2.00000000
CHC/NZDT
ChainCoin
-82.34% On all fronts, you lose an investor ....
July 15, 2017, 02:36:49 AM
I haven't gotten a payment since 2 payments of CHC for few days.
Before when I debug console "masternode start" it would say "masternode started successfully"
Now when I try again it says "masternode started remotely"
Can anyone explain to me why I'm not getting payments and why the change above? Thank you.
Before when I debug console "masternode start" it would say "masternode started successfully"
Now when I try again it says "masternode started remotely"
Can anyone explain to me why I'm not getting payments and why the change above? Thank you.
July 15, 2017, 02:33:51 AM
Wtf is did happen with price?I was in holidays.What kind of news?
July 15, 2017, 02:32:25 AM
that boys ChainCoin, you are very seriously stuck..
July 15, 2017, 02:14:02 AM
i run :
sgminer.exe --kernel chaincoin -o stratum+tcp://chc.suprnova.cc:5888 -u myuser.worker -p x
it goes back to the prompt, this is ridiculous.
sgminer and cgminer are the worst possible miners i have ever used they never show u what the error is
and some times its the pool which is broken , so now wha
how do i get this to work
sgminer.exe --kernel chaincoin -o stratum+tcp://chc.suprnova.cc:5888 -u myuser.worker -p x
it goes back to the prompt, this is ridiculous.
sgminer and cgminer are the worst possible miners i have ever used they never show u what the error is
and some times its the pool which is broken , so now wha
how do i get this to work
My user means you have to put your username -p means you have to put your password
July 15, 2017, 02:07:28 AM
i run :
sgminer.exe --kernel chaincoin -o stratum+tcp://chc.suprnova.cc:5888 -u myuser.worker -p x
it goes back to the prompt, this is ridiculous.
sgminer and cgminer are the worst possible miners i have ever used they never show u what the error is
and some times its the pool which is broken , so now wha
how do i get this to work
sgminer.exe --kernel chaincoin -o stratum+tcp://chc.suprnova.cc:5888 -u myuser.worker -p x
it goes back to the prompt, this is ridiculous.
sgminer and cgminer are the worst possible miners i have ever used they never show u what the error is
and some times its the pool which is broken , so now wha
how do i get this to work
July 15, 2017, 01:58:05 AM
Hi. Welcome.
go my account>earnings
let it run for 1 hour and you should have some stats to do math.
go my account>earnings
let it run for 1 hour and you should have some stats to do math.
i am started to mine right now this coin... i put 4x 1060 3gb mining at 30mh on supernova..
how i can know how much i am earning? icant calculate it
how i can know how much i am earning? icant calculate it
wow i downloaded the alexis mod ccminer and i am getting 40mh now!!! 3x 1060 3gb
can you give me a link an tutorial on the config setting?
I'm on 2 1080 and got 40Mhs...
thanks
July 15, 2017, 01:51:04 AM
Hi. Welcome.
go my account>earnings
let it run for 1 hour and you should have some stats to do math.
go my account>earnings
let it run for 1 hour and you should have some stats to do math.
i am started to mine right now this coin... i put 4x 1060 3gb mining at 30mh on supernova..
how i can know how much i am earning? icant calculate it
how i can know how much i am earning? icant calculate it
wow i downloaded the alexis mod ccminer and i am getting 40mh now!!! 3x 1060 3gb
can you give me a link an tutorial on the config setting?
thanks
July 15, 2017, 01:48:01 AM
getting a cheap masternode now. thanks to all the sellers:)
July 14, 2017, 11:57:33 PM
Sorry for my English, but what about yobit exchange? Very need ChainCoin go to yobit.net!
July 14, 2017, 10:21:38 PM
Anyone have a config.file for AMD cards and what miner works with AMD tried Chaincoin Sgminer and nicehash Sgminer 5.6-1 no luck so far.Can't get to miner from supernova or ann run into
Error (429)
This link is temporarily disabled. The person who shared it hit their daily limit of traffic or downloads. Learn about traffic limits.
Error (429)
This link is temporarily disabled. The person who shared it hit their daily limit of traffic or downloads. Learn about traffic limits.
i have 4x rx 480 and using sgminer i am getting just 20mh for 4 cards it sucks i switched them on eth again...
this is the bat file for sgminer with amd working for me..
ccminer doesnt work with amd
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
sgminer.exe --kernel chaincoin -o stratum+tcp://chc.suprnova.cc:5888 -u (user).(user) -p (password) -I 18 -g 4 -w 128
July 14, 2017, 10:14:55 PM
devs are active. and given that "this" started a week ago.Give them some time. how would you feel if people dumped loads of money at your doorstep? they're helping people out on YT atm.
So where's the main dev in all of this? We're pumping a coin that doesn't have active development?
July 14, 2017, 09:38:31 PM
So where's the main dev in all of this? We're pumping a coin that doesn't have active development?
July 14, 2017, 09:25:28 PM
BTC[2017-07-14 22:24:48] Starting on stratum+tcp://chc.suprnova.cc:5888
[2017-07-14 22:24:48] NVML GPU monitoring enabled.
[2017-07-14 22:24:48] 4 miner threads started, using 'c11' algorithm.
[2017-07-14 22:24:49] Stratum difficulty set to 0.05
[2017-07-14 22:24:49] GPU#1:Intensity set to 21, 2097152 cuda threads
[2017-07-14 22:24:49] GPU#3:Intensity set to 22, 4194304 cuda threads
[2017-07-14 22:24:49] GPU#0:Intensity set to 22, 4194304 cuda threads
[2017-07-14 22:24:49] GPU#2:Intensity set to 22, 4194304 cuda threads
[2017-07-14 22:24:50] GPU#2:result for 34720020 does not validate on CPU!
[2017-07-14 22:24:50] GPU#2:an illegal memory access was encountered
Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 547 : an illegal memory access was encountered.
[2017-07-14 22:24:50] GPU#3:result for 0a0d3b39 does not validate on CPU!
[2017-07-14 22:24:50] GPU#0:result for 0d0a0d3b does not validate on CPU!
Have you tried this? Don't get me wrong i rather be safe.
Yes, mining for the past 10 minutes with it.
It's just the .exe file in a zip format download, nothing else included, so you will need to create your own batch file from scratch to run it. 25+% improvement for me running it vs the standard ccminer 2.1.
[2017-07-14 22:24:48] NVML GPU monitoring enabled.
[2017-07-14 22:24:48] 4 miner threads started, using 'c11' algorithm.
[2017-07-14 22:24:49] Stratum difficulty set to 0.05
[2017-07-14 22:24:49] GPU#1:Intensity set to 21, 2097152 cuda threads
[2017-07-14 22:24:49] GPU#3:Intensity set to 22, 4194304 cuda threads
[2017-07-14 22:24:49] GPU#0:Intensity set to 22, 4194304 cuda threads
[2017-07-14 22:24:49] GPU#2:Intensity set to 22, 4194304 cuda threads
[2017-07-14 22:24:50] GPU#2:result for 34720020 does not validate on CPU!
[2017-07-14 22:24:50] GPU#2:an illegal memory access was encountered
Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 547 : an illegal memory access was encountered.
[2017-07-14 22:24:50] GPU#3:result for 0a0d3b39 does not validate on CPU!
[2017-07-14 22:24:50] GPU#0:result for 0d0a0d3b does not validate on CPU!
Have you tried this? Don't get me wrong i rather be safe.
Yes, mining for the past 10 minutes with it.
It's just the .exe file in a zip format download, nothing else included, so you will need to create your own batch file from scratch to run it. 25+% improvement for me running it vs the standard ccminer 2.1. July 14, 2017, 09:22:43 PM
Have you tried this? Don't get me wrong i rather be safe.
Yes, mining for the past 10 minutes with it.
It's just the .exe file in a zip format download, nothing else included, so you will need to create your own batch file from scratch to run it. 25+% improvement for me running it vs the standard ccminer 2.1. Jump to: