wow 96 cinni over a full shift, thats with 4600khs and 200ghs. total btc earnt 0.012... pretty piss weak profitability :-/
What was your worker #, i want to audit your shares.JKT1qdeiWxgxBzFe2vAoRHPVDczG5VFjLE is my worker address/wallet address.
Topic: [ANN] Cinni | Mandatory: Convert your Cinni to Stakecoin. Instuctions posted. - page 388. (Read 739165 times)
May 18, 2014, 11:35:42 PM
JKT1qdeiWxgxBzFe2vAoRHPVDczG5VFjLE is my worker address/wallet address.
May 18, 2014, 11:16:04 PM
The time draws nigh for an important step of the Cinni saga. And eager people from all across the land wait for an update on the update.
Will there be dancing in the streets and goblets filled with ale, or looting and pillaging the land to flames and dust??
http://youtu.be/zywgkVFsyow
May 18, 2014, 11:14:35 PM
The time draws nigh for an important step of the Cinni saga. And eager people from all across the land wait for an update on the update.
Will there be dancing in the streets and goblets filled with ale, or looting and pillaging the land to flames and dust??
May 18, 2014, 10:52:22 PM
The time draws nigh for an important step of the Cinni saga. And eager people from all across the land wait for an update on the update.
Will there be dancing in the streets and goblets filled with ale, or looting and pillaging the land to flames and dust??
May 18, 2014, 10:31:29 PM
Pump starts, buying
May 18, 2014, 10:03:55 PM
wow 96 cinni over a full shift, thats with 4600khs and 200ghs. total btc earnt 0.012... pretty piss weak profitability :-/
What was your worker #, i want to audit your shares. May 18, 2014, 09:56:34 PM
The time draws nigh for an important step of the Cinni saga. And eager people from all across the land wait for an update on the update.
May 18, 2014, 08:39:02 PM
my wallet always stops at block 60000:
Code:
{
"version" : "v1.0.0.0",
"protocolversion" : 60007,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 60000,
"moneysupply" : 15001668.84095800,
"connections" : 12,
"proxy" : "",
"ip" : "x.x.x.x",
"difficulty" : 0.00288274,
"testnet" : false,
"keypoololdest" : 1400409265,
"keypoolsize" : 101,
"paytxfee" : 0.00500000,
"errors" : ""
}
didn't try the qt wallet... "version" : "v1.0.0.0",
"protocolversion" : 60007,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 60000,
"moneysupply" : 15001668.84095800,
"connections" : 12,
"proxy" : "",
"ip" : "x.x.x.x",
"difficulty" : 0.00288274,
"testnet" : false,
"keypoololdest" : 1400409265,
"keypoolsize" : 101,
"paytxfee" : 0.00500000,
"errors" : ""
}
May 18, 2014, 08:06:18 PM
yes i believe I have latest I also see 12 connections but nothing is happening its version 1.0.0.0
can u post your getinfo results here? (remove the lines with ip, balance etc)
its typed into console tab (Help > debug window)
this is mine currently
Quote
{
"version" : "v1.0.0.0",
"protocolversion" : 60007,
"walletversion" : 60000,
"newmint" : 0.00000000,
"stake" : 12.51604100,
"blocks" : 100756,
"moneysupply" : 15010440.20124600,
"connections" : 12,
}
"version" : "v1.0.0.0",
"protocolversion" : 60007,
"walletversion" : 60000,
"newmint" : 0.00000000,
"stake" : 12.51604100,
"blocks" : 100756,
"moneysupply" : 15010440.20124600,
"connections" : 12,
}
actually with that addnode in thde conf that jaayruu gave, it synced up for me... weird i know thanks anyway
May 18, 2014, 08:01:46 PM
wow 96 cinni over a full shift, thats with 4600khs and 200ghs. total btc earnt 0.012... pretty piss weak profitability :-/
Thats what I was saying earlier, these type of multipools have a large flaw in their design.
I'm actually working on a new type of multipool system that circumvents this.
Will consider creating a clone of it for cinnicoin when its complete.
i hope ya sucessful, days like that profitwise just make it not worth running all those rigs given AU power prices.....
whats the daily profit like on X11 alog as well?
May 18, 2014, 07:58:28 PM
wow 96 cinni over a full shift, thats with 4600khs and 200ghs. total btc earnt 0.012... pretty piss weak profitability :-/
Thats what I was saying earlier, these type of multipools have a large flaw in their design.
I'm actually working on a new type of multipool system that circumvents this.
Will consider creating a clone of it for cinnicoin when its complete.
May 18, 2014, 07:56:34 PM
wow 96 cinni over a full shift, thats with 4600khs and 200ghs. total btc earnt 0.012... pretty piss weak profitability :-/
if the Display is correct we have a very good shift at the Moment >
.00946346096425351003
please add some other x11 coins to your list
May 18, 2014, 07:46:16 PM
wow 96 cinni over a full shift, thats with 4600khs and 200ghs. total btc earnt 0.012... pretty piss weak profitability :-/
May 18, 2014, 07:44:17 PM
yes i believe I have latest I also see 12 connections but nothing is happening its version 1.0.0.0
can u post your getinfo results here? (remove the lines with ip, balance etc)
its typed into console tab (Help > debug window)
this is mine currently
Quote
{
"version" : "v1.0.0.0",
"protocolversion" : 60007,
"walletversion" : 60000,
"newmint" : 0.00000000,
"stake" : 12.51604100,
"blocks" : 100756,
"moneysupply" : 15010440.20124600,
"connections" : 12,
}
"version" : "v1.0.0.0",
"protocolversion" : 60007,
"walletversion" : 60000,
"newmint" : 0.00000000,
"stake" : 12.51604100,
"blocks" : 100756,
"moneysupply" : 15010440.20124600,
"connections" : 12,
}
May 18, 2014, 07:40:28 PM
ty for the heads up. so pretty much the .conf file isn't needed? or just the lines in bold you selected?
not needed for ordinary user. and a fresh install of wallet-qt will sync without it.
May 18, 2014, 07:39:11 PM
Hi my CINNI windows QT wallet hasnt been able to sync for last 2 days.
Are there any nodes I need to add to the cinnicoin.conf file? I coulndn't find anything after searching around.
I even deleted all but the wallet.dat file and made no difference, it's actually worse now because it is so behind and not able to sync and my balance shows 0.
Can anyone help?
Are there any nodes I need to add to the cinnicoin.conf file? I coulndn't find anything after searching around.
I even deleted all but the wallet.dat file and made no difference, it's actually worse now because it is so behind and not able to sync and my balance shows 0.
Can anyone help?
Are you using the latest wallet qt ? I have 12 connections showing. addnodes is not needed now and if you have any its best to remove them. Its not even necessary to have a conf unless you customizing some settings for your own use and understand what you are doing.
yes i believe I have latest I also see 12 connections but nothing is happening its version 1.0.0.0
May 18, 2014, 07:35:37 PM
To cinnipool Manager:
Please add some other coins to your mining-List ..
some of These coins are too old and "already" dead .. like lottocoin .. 1satoshi ..
Please add some other coins to your mining-List ..
some of These coins are too old and "already" dead .. like lottocoin .. 1satoshi ..
May 18, 2014, 07:28:26 PM
Hi my CINNI windows QT wallet hasnt been able to sync for last 2 days.
Are there any nodes I need to add to the cinnicoin.conf file? I coulndn't find anything after searching around.
I even deleted all but the wallet.dat file and made no difference, it's actually worse now because it is so behind and not able to sync and my balance shows 0.
Can anyone help?
Are there any nodes I need to add to the cinnicoin.conf file? I coulndn't find anything after searching around.
I even deleted all but the wallet.dat file and made no difference, it's actually worse now because it is so behind and not able to sync and my balance shows 0.
Can anyone help?
Delete all but your wallet.dat file then
add a file to your AppData>Roaming>Cinnicoin>
called : cinnicoin.conf
server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=31812
addnode=108.61.103.46
Thats what got mine going.
you should probably remove those lines, they are not needed for ordinary user. and can be a security risk. listen is enabled by default.
Quote
-server Accept command line and JSON-RPC commands
-rpcuser= Username for JSON-RPC connections
-rpcpassword= Password for JSON-RPC connections
-rpcport= Listen for JSON-RPC connections on (default: 8332 or testnet: 18332)
-rpcallowip= Allow JSON-RPC connections from specified IP address
-listen Accept connections from outside (default: 1 if no -proxy or -connect)
-rpcuser=
-rpcpassword=
-rpcport=
-rpcallowip=
-listen Accept connections from outside (default: 1 if no -proxy or -connect)
ty for the heads up. so pretty much the .conf file isn't needed? or just the lines in bold you selected?
May 18, 2014, 07:15:39 PM
I can upload the cinni blockchain somewhere if there is some interest for that?
May 18, 2014, 07:02:23 PM
Hi my CINNI windows QT wallet hasnt been able to sync for last 2 days.
Are there any nodes I need to add to the cinnicoin.conf file? I coulndn't find anything after searching around.
I even deleted all but the wallet.dat file and made no difference, it's actually worse now because it is so behind and not able to sync and my balance shows 0.
Can anyone help?
Are there any nodes I need to add to the cinnicoin.conf file? I coulndn't find anything after searching around.
I even deleted all but the wallet.dat file and made no difference, it's actually worse now because it is so behind and not able to sync and my balance shows 0.
Can anyone help?
Delete all but your wallet.dat file then
add a file to your AppData>Roaming>Cinnicoin>
called : cinnicoin.conf
server=1
listen=1
rpcuser=user
rpcpassword=pass
rpcport=31812
addnode=108.61.103.46
Thats what got mine going.
you should probably remove those lines, they are not needed for ordinary user. and can be a security risk. listen is enabled by default.
Quote
-server Accept command line and JSON-RPC commands
-rpcuser= Username for JSON-RPC connections
-rpcpassword= Password for JSON-RPC connections
-rpcport= Listen for JSON-RPC connections on (default: 8332 or testnet: 18332)
-rpcallowip= Allow JSON-RPC connections from specified IP address
-listen Accept connections from outside (default: 1 if no -proxy or -connect)
-rpcuser=
-rpcpassword=
-rpcport=
-rpcallowip=
-listen Accept connections from outside (default: 1 if no -proxy or -connect)
Jump to: