[ANN] [CPU mining] Yenten v2.0.1 [YTN] [YescryptR16] [Exchange avilable] - page 11.

ohashi3d

jr. member

Activity: 51

Merit: 3

Quote from: ptdvz on November 10, 2018, 01:07:29 AM

Confirmed. This is 1.3.1. My solomined blocks show up too.

Edit: I am confused. While 1.3.1 solomined blocks show up there the richlist still has the fake coins listed. Maybe he is in progress of changing to 1.3.1 but database is not fully updated yet? I'll try to ask the admin of the explorer on discord.

The rich list of https://ytn.overemo.com/ is not showing realtime data...
I hope it will get update/maintenance and we won't see no more absurd balances tomorrow

ptdvz

newbie

Activity: 63

Merit: 0

Quote from: ohashi3d on November 09, 2018, 09:56:15 PM

Quote from: FacelessCrypto on November 09, 2018, 09:32:38 PM

Quote from: ohashi3d on November 09, 2018, 08:00:24 PM

Now, Yenten Explorer https://ytn.overemo.com/ has been recovered.
but it looks strange...
- it isn't 1.3.1 chain...slightly goes ahead.
- some older block height has newer age.
...is there the 3rd chain!?

-- edited: now it looks OK, 1.3.1 chain!

This one 1.3 based or corrupted 2.x. x based

https://ytn.overemo.com/ looks 1.3 based.
My solo mined blocks with v1.3.1 can be observed there.

Now 110kH/s...about 20% is me

Confirmed. This is 1.3.1. My solomined blocks show up too.

Edit: I am confused. While 1.3.1 solomined blocks show up there the richlist still has the fake coins listed. Maybe he is in progress of changing to 1.3.1 but database is not fully updated yet? I'll try to ask the admin of the explorer on discord.

ohashi3d

jr. member

Activity: 51

Merit: 3

Quote from: FacelessCrypto on November 09, 2018, 09:32:38 PM

Quote from: ohashi3d on November 09, 2018, 08:00:24 PM

Now, Yenten Explorer https://ytn.overemo.com/ has been recovered.
but it looks strange...
- it isn't 1.3.1 chain...slightly goes ahead.
- some older block height has newer age.
...is there the 3rd chain!?

-- edited: now it looks OK, 1.3.1 chain!

This one 1.3 based or corrupted 2.x. x based

https://ytn.overemo.com/ looks 1.3 based.
My solo mined blocks with v1.3.1 can be observed there.

Now 110kH/s...about 20% is me

FacelessCrypto

full member

Activity: 539

Merit: 105

IDENA.IO - Proof-Of-Person Blockchain

Quote from: ohashi3d on November 09, 2018, 08:00:24 PM

Now, Yenten Explorer https://ytn.overemo.com/ has been recovered.
but it looks strange...
- it isn't 1.3.1 chain...slightly goes ahead.
- some older block height has newer age.
...is there the 3rd chain!?

-- edited: now it looks OK, 1.3.1 chain!

This one 1.3 based or corrupted 2.x. x based

FacelessCrypto

full member

Activity: 539

Merit: 105

IDENA.IO - Proof-Of-Person Blockchain

1.3.1 network hash reached 126k now

ohashi3d

jr. member

Activity: 51

Merit: 3

Now, Yenten Explorer https://ytn.overemo.com/ has been recovered.
but it looks strange...
- it isn't 1.3.1 chain...slightly goes ahead.
- some older block height has newer age.
...is there the 3rd chain!?

-- edited: now it looks OK, 1.3.1 chain!

dawaska

newbie

Activity: 32

Merit: 0

hash power of yenten v1.3.1 increased to 104 KH/s
now clearly over v2.0

gcrypt11

newbie

Activity: 6

Merit: 0

thanks, just as FYI the divergence seems to happen at block 248958 2018-10-15 20:49:50 (1539636590)

it looks to be correlated with the jump that happened around 15 oct, can someone else also smell some pump and dump manipulation before the news got out?

dawaska

newbie

Activity: 32

Merit: 0

Quote from: gcrypt11 on November 09, 2018, 09:46:13 AM

Hi fellow yenten miners/hodlers

The chains must have diverged at some point, could someone point to the blocknumber (where it divered). otherwise can anyone point to a blockexplorer of v1.3, need to check if v2.0 mined coins are reflecting over there (and until what block)

Any exchange that has moved to v1.3? we need to get the market back

block explorer for v1.3 : http://cpumining.zapto.org/site/block?id=2019

block explorer for v2.0 : https://ytn.overemo.com/

wangxiaoyan600

member

Activity: 350

Merit: 11

The overall concept of the Yenten project is good, and the coins of the POS algorithm for CPU mining are worth investor's attention.

gcrypt11

newbie

Activity: 6

Merit: 0

Hi fellow yenten miners/hodlers

The chains must have diverged at some point, could someone point to the blocknumber (where it divered). otherwise can anyone point to a blockexplorer of v1.3, need to check if v2.0 mined coins are reflecting over there (and until what block)

Any exchange that has moved to v1.3? we need to get the market back

dawaska

newbie

Activity: 32

Merit: 0

Quote from: FacelessCrypto on November 09, 2018, 08:56:04 AM

Quote from: dawaska on November 09, 2018, 08:01:06 AM

all mining pool except lucky pool went back to v1.3.1
I sent an e-mail to lucky pool to ask them to switch back to v1.3.1

So what's the comparison of hashpower 1.3 vs 2?

Which dreamer still mining 2.0,🤔

right now hash powers are equals on both versions (~80KH/s)
all the hashpower of v2.0 comes from lucky pool because all others mining pool switch to v1.3
we just need luckypool to switch to v1.3 and v2.0 would be dead

FacelessCrypto

full member

Activity: 539

Merit: 105

IDENA.IO - Proof-Of-Person Blockchain

Quote from: dawaska on November 09, 2018, 08:01:06 AM

all mining pool except lucky pool went back to v1.3.1
I sent an e-mail to lucky pool to ask them to switch back to v1.3.1

So what's the comparison of hashpower 1.3 vs 2?

Which dreamer still mining 2.0,🤔

dawaska

newbie

Activity: 32

Merit: 0

all mining pool except lucky pool went back to v1.3.1
I sent an e-mail to lucky pool to ask them to switch back to v1.3.1

FacelessCrypto

full member

Activity: 539

Merit: 105

IDENA.IO - Proof-Of-Person Blockchain

Quote from: dawaska on November 09, 2018, 05:41:03 AM

that's it boys Yenten 1.3 has more hashpower than 2.0

yenten 1.3 = 93 KH/s
yenten 2.0 = 83 KH/s

yenten will survive Grin

Super.. calling all to abandon 2.0 version and revert to 1.3.1

dawaska

newbie

Activity: 32

Merit: 0

Quote from: LTT24 on November 09, 2018, 05:50:20 AM

The total supply is just 80m, but there have more than 200m coins in the market. what's going on?

because of a bug in the v2.0 release, the network has suffered a double spend attack and the blockchain is now corrupted
that's why we are reactivating the old version of the network (v1.3) to restore the correct blockchain and eliminate the fraudulent coins of the market.

ptdvz

newbie

Activity: 63

Merit: 0

Quote from: LTT24 on November 09, 2018, 05:50:20 AM

The total supply is just 80m, but there have more than 200m coins in the market. what's going on?

Read the last couple pages and you will understand. Sorry if this seems a bit harsh but it gets tiresome to repeat the same stuff over and over again.

TL;DR: 2.0.1 is fucked. Move to 1.3.1.

LTT24

newbie

Activity: 157

Merit: 0

The total supply is just 80m, but there have more than 200m coins in the market. what's going on?

dawaska

newbie

Activity: 32

Merit: 0

please someone contact the dev of the exchange for listing yenten

Quote

you could contact the Dev on [email protected] if you would like to clarify.

dawaska

newbie

Activity: 32

Merit: 0

that's it boys Yenten 1.3 has more hashpower than 2.0

yenten 1.3 = 93 KH/s
yenten 2.0 = 83 KH/s

yenten will survive Grin

Topic: [ANN] [CPU mining] Yenten v2.0.1 [YTN] [YescryptR16] [Exchange avilable] - page 11. (Read 147146 times)