Author

Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 162. (Read 3426930 times)

hero member
Activity: 644
Merit: 500
new version of m7 for the non-750ti  Grin (same perf as yesterday for the 750ti)

https://mega.co.nz/#!UB1w1SwZ!_oZWnCXmLOP-plPP-t9xVzHVpn-Hmge0SC2sxGCqFJk

+1~1.5MH/s on my 780ti (12MH/s OC)

something really strange actually, some pragma unroll increase the perf (as it should) for the 780ti but decrease it on the 750ti  Shocked
Very strange... was wondering why my multiplication was behaving so strangely from one card to another... well...
Doesn't explain anything though  Grin

pls help
Unable to query number of CUDA devices! is an nVidia driver installed?
337.88
Get the latest one, 340.52
newbie
Activity: 2
Merit: 0
new version of m7 for the non-750ti  Grin (same perf as yesterday for the 750ti)

https://mega.co.nz/#!UB1w1SwZ!_oZWnCXmLOP-plPP-t9xVzHVpn-Hmge0SC2sxGCqFJk

+1~1.5MH/s on my 780ti (12MH/s OC)

something really strange actually, some pragma unroll increase the perf (as it should) for the 780ti but decrease it on the 750ti  Shocked
Very strange... was wondering why my multiplication was behaving so strangely from one card to another... well...
Doesn't explain anything though  Grin

pls help
Unable to query number of CUDA devices! is an nVidia driver installed?
337.88
full member
Activity: 140
Merit: 100
New version of ccminer: https://mega.co.nz/#!RM8EGCpb!nH_DRnQOtTey44Vyl5hGljZBEPJLUxUopl2EmLTN4iQ

* slight improvement in the performance (tiny and more stable)
* No more share which doesn't validate on cpu...
(still remain the problem with low diff share rejected at the beginning of a run on 1gh)

4 750Ti's:



4.1~4.2MHs per card

270W at wall.

Need to check if applied OC will be stable.
Used same settings as JPC.
Not stable with +350 MEM OC.
Reduced to +250 and doing fine so far. Will push to +300 if it keep stable until tomorrow.
legendary
Activity: 1400
Merit: 1050
new version of m7 for the non-750ti  Grin (same perf as yesterday for the 750ti)

https://mega.co.nz/#!UB1w1SwZ!_oZWnCXmLOP-plPP-t9xVzHVpn-Hmge0SC2sxGCqFJk

+1~1.5MH/s on my 780ti (12MH/s OC)

something really strange actually, some pragma unroll increase the perf (as it should) for the 780ti but decrease it on the 750ti  Shocked
Very strange... was wondering why my multiplication was behaving so strangely from one card to another... well...
Doesn't explain anything though  Grin
hero member
Activity: 644
Merit: 500
I'm sorry for those who I've left waiting, but here is the latest release of my mining profit calc:

Profitability Calculator v0.6beta
- Rewrote most off the code behind hashrates, and made it a lot more customizable. Now you can add new mining algorithms yourself in a flexible way.
- Redesign of the GUI.
- Added custom coins. If one of the coin info APIs don't support your coin yet, add it yourself.
- Added C-Cex, Comkort, BTer, Atomic Trade & Cryptoine to the supported exchange APIs.
- Added profiles. This is not used by myself, so beware, not fully tested. Testers needed! Cheesy
- Loads of other bug fixes and improvements, as usual.



IN CASE OF ANY BUGS:
1) Try a fresh folder and remove any old settings or hashrates.
2) Try running as admin.
3) ?? ??
4) Profit!
5) If not, tell me Cheesy

Hi folks,

IS XCN more profitable than JPC by now?

With current BTC and JPC value I'm just paying electricity...  Undecided
You can add M7 algo to my profit calc Wink Just use 20 as Target (as explained in readme) and make sure you set up a XCN custom coin.

Charitycoin 1700$/day is that for real ? and with what hashrate  Grin

Look at the nice color it has ^^" It's a coin with 0 volume, so good luck selling that.
legendary
Activity: 1400
Merit: 1050
I'm sorry for those who I've left waiting, but here is the latest release of my mining profit calc:

Profitability Calculator v0.6beta
- Rewrote most off the code behind hashrates, and made it a lot more customizable. Now you can add new mining algorithms yourself in a flexible way.
- Redesign of the GUI.
- Added custom coins. If one of the coin info APIs don't support your coin yet, add it yourself.
- Added C-Cex, Comkort, BTer, Atomic Trade & Cryptoine to the supported exchange APIs.
- Added profiles. This is not used by myself, so beware, not fully tested. Testers needed! Cheesy
- Loads of other bug fixes and improvements, as usual.



IN CASE OF ANY BUGS:
1) Try a fresh folder and remove any old settings or hashrates.
2) Try running as admin.
3) ?? ??
4) Profit!
5) If not, tell me Cheesy

Hi folks,

IS XCN more profitable than JPC by now?

With current BTC and JPC value I'm just paying electricity...  Undecided
You can add M7 algo to my profit calc Wink Just use 20 as Target (as explained in readme) and make sure you set up a XCN custom coin.

Charitycoin 1700$/day is that for real ? and with what hashrate  Grin
full member
Activity: 140
Merit: 100
I'm sorry for those who I've left waiting, but here is the latest release of my mining profit calc:

Profitability Calculator v0.6beta
- Rewrote most off the code behind hashrates, and made it a lot more customizable. Now you can add new mining algorithms yourself in a flexible way.
- Redesign of the GUI.
- Added custom coins. If one of the coin info APIs don't support your coin yet, add it yourself.
- Added C-Cex, Comkort, BTer, Atomic Trade & Cryptoine to the supported exchange APIs.
- Added profiles. This is not used by myself, so beware, not fully tested. Testers needed! Cheesy
- Loads of other bug fixes and improvements, as usual.

IN CASE OF ANY BUGS:
1) Try a fresh folder and remove any old settings or hashrates.
2) Try running as admin.
3) ?? ??
4) Profit!
5) If not, tell me Cheesy

Hi folks,

IS XCN more profitable than JPC by now?

With current BTC and JPC value I'm just paying electricity...  Undecided
You can add M7 algo to my profit calc Wink Just use 20 as Target (as explained in readme) and make sure you set up a XCN custom coin.

Tried but didn't worked.
Maybe I'm doing something wrong... pretty tired. Tomorrow I'll try again...  Wink
full member
Activity: 140
Merit: 100
New version of ccminer: https://mega.co.nz/#!RM8EGCpb!nH_DRnQOtTey44Vyl5hGljZBEPJLUxUopl2EmLTN4iQ

* slight improvement in the performance (tiny and more stable)
* No more share which doesn't validate on cpu...
(still remain the problem with low diff share rejected at the beginning of a run on 1gh)

4 750Ti's:



4.1~4.2MHs per card

270W at wall.

Need to check if applied OC will be stable.
Used same settings as JPC.
hero member
Activity: 644
Merit: 500
I'm sorry for those who I've left waiting, but here is the latest release of my mining profit calc:

Profitability Calculator v0.6beta
- Rewrote most off the code behind hashrates, and made it a lot more customizable. Now you can add new mining algorithms yourself in a flexible way.
- Redesign of the GUI.
- Added custom coins. If one of the coin info APIs don't support your coin yet, add it yourself.
- Added C-Cex, Comkort, BTer, Atomic Trade & Cryptoine to the supported exchange APIs.
- Added profiles. This is not used by myself, so beware, not fully tested. Testers needed! Cheesy
- Loads of other bug fixes and improvements, as usual.



IN CASE OF ANY BUGS:
1) Try a fresh folder and remove any old settings or hashrates.
2) Try running as admin.
3) ?? ??
4) Profit!
5) If not, tell me Cheesy

Hi folks,

IS XCN more profitable than JPC by now?

With current BTC and JPC value I'm just paying electricity...  Undecided
You can add M7 algo to my profit calc Wink Just use 20 as Target (as explained in readme) and make sure you set up a XCN custom coin.
full member
Activity: 140
Merit: 100
Hi folks,

IS XCN more profitable than JPC by now?

With current BTC and JPC value I'm just paying electricity...  Undecided
hero member
Activity: 494
Merit: 500
djm34, miner is working great for me..4200-4300  501 k on my cpu
full member
Activity: 168
Merit: 100
in your batch file after the ccminer.exe or nvminer.exe line add the following:

pause


that will stop the screen until you hit a key so you can read what the error is.

Carlo
full member
Activity: 126
Merit: 100
A FIDUS ACHATE, STAYS LOST IN FLIGHT
cant i find a miner with a .exe rather than command prompts because it just flashes on my screen an diappears
full member
Activity: 168
Merit: 100
Haha, no. I just change them every once in a while, because I don't like having the same ones all the time.

Single guys need fresh puddy now and then  Shocked
sr. member
Activity: 350
Merit: 250
Finally reached 4MH/s again on AWS after the screwup causing massive stales (was getting 4.5MH/s before, but each batch of hashes were taking too long, causing the work to be stale by the time the GPU had completed it too often.) Also reached 4.5MH/s per stock 750Ti. Screenshot for AWS shows CPU + GPU speeds, CPU being around 300kh/s or so. Screenshot for the 750Ti cards shows a higher hashrate at the pool, no doubt caused by luck.

AWS:  https://ottrbutt.com/tmp/xcnk5203.png
750Ti: https://ottrbutt.com/tmp/xcn750tiwolf4.png

Lmao do you change your background to best suit the screen shot? i'm looking at screen 2 lmao
legendary
Activity: 1400
Merit: 1050
New version of ccminer: https://mega.co.nz/#!RM8EGCpb!nH_DRnQOtTey44Vyl5hGljZBEPJLUxUopl2EmLTN4iQ

* slight improvement in the performance (tiny and more stable)
* No more share which doesn't validate on cpu...
(still remain the problem with low diff share rejected at the beginning of a run on 1gh)
About validation on cpu - how taxing is this? Can I disable this check? Wanna see if running on lowend cpu is taxing my speed

And one "general" question

Anyone who checked speed of "keccak" implementation?

Regarding cpu validation, it has no impact on the performance as only accepted (or acceptable) shares are checked before being submitted.
I was thinking to remove that step too, but actually it makes no difference.

Concerning Keccak, here the situation: %age of time spent in each kernel (top 780ti bottom 750ti)


My version of keccak might not be the fastest, but considering the time spent there which means there is only a little to gain, it doesn't get on the top 5 of my priority list...
legendary
Activity: 1151
Merit: 1001
New version of ccminer: https://mega.co.nz/#!RM8EGCpb!nH_DRnQOtTey44Vyl5hGljZBEPJLUxUopl2EmLTN4iQ

* slight improvement in the performance (tiny and more stable)
* No more share which doesn't validate on cpu...
(still remain the problem with low diff share rejected at the beginning of a run on 1gh)
About validation on cpu - how taxing is this? Can I disable this check? Wanna see if running on lowend cpu is taxing my speed

And one "general" question

Anyone who checked speed of "keccak" implementation?
hero member
Activity: 773
Merit: 508
Bitcore (BTX) - The Future is Now
New version of ccminer: https://mega.co.nz/#!RM8EGCpb!nH_DRnQOtTey44Vyl5hGljZBEPJLUxUopl2EmLTN4iQ

* slight improvement in the performance (tiny and more stable)
* No more share which doesn't validate on cpu...
(still remain the problem with low diff share rejected at the beginning of a run on 1gh)
thank you. works good.
legendary
Activity: 1400
Merit: 1050
New version of ccminer: https://mega.co.nz/#!RM8EGCpb!nH_DRnQOtTey44Vyl5hGljZBEPJLUxUopl2EmLTN4iQ

* slight improvement in the performance (tiny and more stable)
* No more share which doesn't validate on cpu...
(still remain the problem with low diff share rejected at the beginning of a run on 1gh)
hero member
Activity: 494
Merit: 500
thanks added it, great idea, thanks for sharing
Jump to: