[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 166.

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: ?? on ??

Quote from: mmmaybe on August 13, 2014, 08:23:50 PM

Thanks djm

I will test it and compare it with results from Catia's

**edit: ccminer missed cudart32_65.dll - found one in som other version - so now it runs

in which version did you find it please ?

I changed the link, so now they should be here

polanskiman

full member

Activity: 266

Merit: 100

Quote from: djm34 on August 13, 2014, 08:13:29 PM

Here a first version of ccminer with cryptonite support (binaries windows).

ccminer -a m7

https://mega.co.nz/#!tM1HyTqL!jS9Ak6UK-AQkLC-850Fq4g382eYJySw7mCwSWCxfK-Q

It should work, however there are still a few things to correct:
* relatively large amount compare to other algo of share which doesn't validate on cpu (probably whirlpool)
* You might have while starting mining on 1gh a long chain of boo because of the low diff (like for HVC, If I remember well).
Just let the miner run, until it stabilizes

Please report any other problems, especially if you run on other algo to be sure that I didn't break anything and all the algos are still fully functional. I will release the source a bit later once things are more stable and I am sure that the m7 doesn't break anything.

I am actually getting lower hashrates than with catia's release. ~200H/s less per card. That's when I use -t 6.

If I only use -t 1 then I get a much better hashrate. 4200H/s for the card.

EDIT: Issue resolved: I had Process Lasso installed and configured improperly. It was setting affinity of ccminer to only 2 cores thus the reduced hashing. Now getting ~ 4.2 Mh on each card. Thank you Cayars for the help.

Nice work djm34

mmmaybe

sr. member

Activity: 462

Merit: 250

Running Win7, I have one 750-nonTI; it just spitts out "does not validate on CPU" when starting...

However, a rig with only 5 750TI, slightly OCed, went from 18000 -> 20700

So 4,150 per 750TI from earlier 3,600!

Very nice! I did get a lot of booo's in the beginning tho, but I see more yays nnow

~~Do you have a donation address for XCN, djm34?~~ Sorry, saw now - will send some to you now

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: mmmaybe on August 13, 2014, 08:23:50 PM

Thanks djm

I will test it and compare it with results from Catia's

**edit: ccminer missed cudart32_65.dll - found one in som other version - so now it runs

yes... I forgot to include them... I will make another link...

https://mega.co.nz/#!8c0RQRQI!7pux-uYYlgW2IYxaTbpERV-XTMkqUyYs6Nlt3AwCUpE

RavenXBR

full member

Activity: 140

Merit: 100

Quote from: myagui on August 13, 2014, 02:05:06 PM

Just my 2 satoshis, but those unpowered ribbon risers are an accident waiting to happen. I strongly advise you to get the powered 1x to 16x ones (usb type cable). You can fit the 1x risers in x16 slots, no problem.
~ Myagui

I have a 4 750 rig running on a H61 MOBO with unpowered ribbon risers and everything is fine for a couple of months.

I could not manage to work the USB risers.

sparks2013

newbie

Activity: 55

Merit: 0

Quote from: djm34 on August 13, 2014, 08:13:29 PM

Here a first version of ccminer with cryptonite support (binaries windows).

ccminer -a m7

https://mega.co.nz/#!tM1HyTqL!jS9Ak6UK-AQkLC-850Fq4g382eYJySw7mCwSWCxfK-Q

It should work, however there are still a few things to correct:
* relatively large amount compare to other algo of share which doesn't validate on cpu (probably whirlpool)
* You might have while starting mining on 1gh a long chain of boo because of the low diff (like for HVC, If I remember well).
Just let the miner run, until it stabilizes

Please report any other problems, especially if you run on other algo to be sure that I didn't break anything and all the algos are still fully functional. I will release the source a bit later once things are more stable and I am sure that the m7 doesn't break anything.

Working great so far djm!! Very nice job

ilovecudacompute

member

Activity: 112

Merit: 10

Quote from: djm34 on August 13, 2014, 08:13:29 PM

Here a first version of ccminer with cryptonite support (binaries windows).

ccminer -a m7

https://mega.co.nz/#!tM1HyTqL!jS9Ak6UK-AQkLC-850Fq4g382eYJySw7mCwSWCxfK-Q

It should work, however there are still a few things to correct:
* relatively large amount compare to other algo of share which doesn't validate on cpu (probably whirlpool)
* You might have while starting mining on 1gh a long chain of boo because of the low diff (like for HVC, If I remember well).
Just let the miner run, until it stabilizes

Please report any other problems, especially if you run on other algo to be sure that I didn't break anything and all the algos are still fully functional. I will release the source a bit later once things are more stable and I am sure that the m7 doesn't break anything.

Thanks a ton djm
I get peaks of 4.9MH with 760 gpu

tc61

hero member

Activity: 494

Merit: 500

any news on a bbr windows miner?

mmmaybe

sr. member

Activity: 462

Merit: 250

Thanks djm

I will test it and compare it with results from Catia's

**edit: ccminer missed cudart32_65.dll - found one in som other version - so now it runs

djm34

legendary

Activity: 1400

Merit: 1050

Here a first version of ccminer with cryptonite support (binaries windows).

ccminer -a m7

https://mega.co.nz/#!tM1HyTqL!jS9Ak6UK-AQkLC-850Fq4g382eYJySw7mCwSWCxfK-Q

It should work, however there are still a few things to correct:
* relatively large amount compare to other algo of share which doesn't validate on cpu (probably whirlpool)
* You might have while starting mining on 1gh a long chain of boo because of the low diff (like for HVC, If I remember well).
Just let the miner run, until it stabilizes

Please report any other problems, especially if you run on other algo to be sure that I didn't break anything and all the algos are still fully functional. I will release the source a bit later once things are more stable and I am sure that the m7 doesn't break anything.

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: ?? on ??

https://twitter.com/Anti_Pump/status/499686107831754755

and we care because ? (never heard of Joincoin before...)

sciakysystem

full member

Activity: 182

Merit: 100

Quote from: bigjme on August 13, 2014, 04:39:07 PM

Quote from: sciakysystem on August 13, 2014, 03:55:47 PM

Quote from: bigjme on August 13, 2014, 02:49:45 PM

Yes, powered risers dont get power from the motherboard so without power from a molex the cards wont work, or atleast shouldnt work well

Ok..so i have to connect molex and then try with cards all to 1300mhz.. if ccminer crash again, i have to try to use only 1 to 16 risers, even into 16pin ports.. if ccminer crash again, it is better to spend time with my wife Wink

all right??

all right but 1300MHz may still be too high. If it is, set to 1100MHz and see if that runs, if it does then slowly work your way up

Finally it seems all goes fine.. 2 cards directly into MoBo, 4 risers 1pin to 16pins.. 30 minutes and ccminer doesnt crash yet

All cards at 1300mhz..tomorrow i'll try at 1350mhz and if all goes fine i'll try at 1400mhz.. I think evga acx cooler version has great possibility in OC.. I tested it last week with UnEngine Benchmark..at 1450mhz in stay under 55°, with only +12mV.. PCB very cold, 95% fan..VRM are not a problem.. memory offset at +75mhz.. I will refresh you..

Finally my problem was my Two 16to16 risers.

manymany thanks to all of you.

coinits

legendary

Activity: 1582

Merit: 1019

011110000110110101110010

Quote from: Bombadil on August 13, 2014, 06:39:36 PM

Quote from: coinits on August 13, 2014, 06:36:26 PM

I'm looking for a compiled cryptonight windows exe. I tried the download by tsiv at http://www.cudamining.cc/url/releases/member/4 but that is source code. I do have Visual Studio 2010 so I could compile it if someone could point me to a step-by-step to do this.

I know vb.net compact framework so this code is foreign to me.

Thanks

Take a look at this Wink

https://github.com/tsiv/ccminer-cryptonight/releases

Merci buckets dude!

Bombadil

hero member

Activity: 644

Merit: 500

Quote from: coinits on August 13, 2014, 06:36:26 PM

I'm looking for a compiled cryptonight windows exe. I tried the download by tsiv at http://www.cudamining.cc/url/releases/member/4 but that is source code. I do have Visual Studio 2010 so I could compile it if someone could point me to a step-by-step to do this.

I know vb.net compact framework so this code is foreign to me.

Thanks

Take a look at this Wink

https://github.com/tsiv/ccminer-cryptonight/releases

coinits

legendary

Activity: 1582

Merit: 1019

011110000110110101110010

I'm looking for a compiled cryptonight windows exe. I tried the download by tsiv at http://www.cudamining.cc/url/releases/member/4 but that is source code. I do have Visual Studio 2010 so I could compile it if someone could point me to a step-by-step to do this.

I know vb.net compact framework so this code is foreign to me.

Thanks

coinits

legendary

Activity: 1582

Merit: 1019

011110000110110101110010

Quote from: tarzanbigcity on August 13, 2014, 06:00:05 PM

Quote from: coinits on August 13, 2014, 05:11:03 PM

Quote from: sciakysystem on August 13, 2014, 04:37:25 AM

No one can suggest me something more then reinstall drivers and try without oc for my problem?

Windows 7 Home Premium 64bit;
Latest NVIDIA drivers;
6x EVGA 750ti ACX cooler FTW;
i5 4690k with 8gb RAM 1600mhz..

Ccminer crashes with command -d 0,1,2,3,4,5..
Nvminer crashes with command above..

With evga precision x i saw that GPU 1 stay 13mhz under the clock i set and GPU2 stay 13mhz above clock i set. Result: those cards are the ones that crashed ccminer. Is there an error on ccminer or on my system?

Sometimes uninstalling and then reinstalling the drivers is not enough. Sometimes, like in my case, you need to use Display Driver Uninstaller. It comes from Guru3D and replaces their Drive Sweeper Program.

I ran it through AV and Malware Bytes and both reported it clean. I used it on my Win 7 box and it worked perfectly.

Have you flashed your cards to allow for higher TDP? Mine were giving me issues until I did this.
http://cryptomining-blog.com/tag/gtx-750-ti-tdp/

No. I did not do this. I get about 5.3 - 5.8 MHS sustained per 750TI with no overclocking. Do you get better than that with this tweak?

tarzanbigcity

sr. member

Activity: 602

Merit: 250

Quote from: coinits on August 13, 2014, 05:11:03 PM

Quote from: sciakysystem on August 13, 2014, 04:37:25 AM

No one can suggest me something more then reinstall drivers and try without oc for my problem?

Windows 7 Home Premium 64bit;
Latest NVIDIA drivers;
6x EVGA 750ti ACX cooler FTW;
i5 4690k with 8gb RAM 1600mhz..

Ccminer crashes with command -d 0,1,2,3,4,5..
Nvminer crashes with command above..

With evga precision x i saw that GPU 1 stay 13mhz under the clock i set and GPU2 stay 13mhz above clock i set. Result: those cards are the ones that crashed ccminer. Is there an error on ccminer or on my system?

Sometimes uninstalling and then reinstalling the drivers is not enough. Sometimes, like in my case, you need to use Display Driver Uninstaller. It comes from Guru3D and replaces their Drive Sweeper Program.

I ran it through AV and Malware Bytes and both reported it clean. I used it on my Win 7 box and it worked perfectly.

Have you flashed your cards to allow for higher TDP? Mine were giving me issues until I did this.
http://cryptomining-blog.com/tag/gtx-750-ti-tdp/

coinits

legendary

Activity: 1582

Merit: 1019

011110000110110101110010

Quote from: sciakysystem on August 13, 2014, 04:37:25 AM

No one can suggest me something more then reinstall drivers and try without oc for my problem?

Windows 7 Home Premium 64bit;
Latest NVIDIA drivers;
6x EVGA 750ti ACX cooler FTW;
i5 4690k with 8gb RAM 1600mhz..

Ccminer crashes with command -d 0,1,2,3,4,5..
Nvminer crashes with command above..

With evga precision x i saw that GPU 1 stay 13mhz under the clock i set and GPU2 stay 13mhz above clock i set. Result: those cards are the ones that crashed ccminer. Is there an error on ccminer or on my system?

Sometimes uninstalling and then reinstalling the drivers is not enough. Sometimes, like in my case, you need to use Display Driver Uninstaller. It comes from Guru3D and replaces their Drive Sweeper Program.

I ran it through AV and Malware Bytes and both reported it clean. I used it on my Win 7 box and it worked perfectly.

bigjme

sr. member

Activity: 350

Merit: 250

Quote from: sciakysystem on August 13, 2014, 03:55:47 PM

Quote from: bigjme on August 13, 2014, 02:49:45 PM

Yes, powered risers dont get power from the motherboard so without power from a molex the cards wont work, or atleast shouldnt work well

Ok..so i have to connect molex and then try with cards all to 1300mhz.. if ccminer crash again, i have to try to use only 1 to 16 risers, even into 16pin ports.. if ccminer crash again, it is better to spend time with my wife Wink

all right??

all right but 1300MHz may still be too high. If it is, set to 1100MHz and see if that runs, if it does then slowly work your way up

bathrobehero

legendary

Activity: 2002

Merit: 1051

ICO? Not even once.

Quote from: sciakysystem on August 13, 2014, 03:55:47 PM

Quote from: bigjme on August 13, 2014, 02:49:45 PM

Yes, powered risers dont get power from the motherboard so without power from a molex the cards wont work, or atleast shouldnt work well

Ok..so i have to connect molex and then try with cards all to 1300mhz.. if ccminer crash again, i have to try to use only 1 to 16 risers, even into 16pin ports.. if ccminer crash again, it is better to spend time with my wife Wink

all right??

1300 won't be stable on a lot of cards.

Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 166. (Read 3426944 times)