[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 915.

bugilt

member

Activity: 85

Merit: 10

@maxcoinproject: WARNING: The fake ANN thread on cryptocointalk contains malware and viruses. Do not download anything from it.

ringthefire

member

Activity: 61

Merit: 10

what command do I add if I have multiple gpus ? I have two gtx 780s

Using -d 0,1 gives the error 'k1204x32 requires too much memory'

Using -d gtx780 works, but only one gpu

Thanks

cbuchner1

hero member

Activity: 756

Merit: 502

Quote from: apst14 on February 06, 2014, 06:02:12 PM

Why my 780gtx goes so slow?

[2014-02-06 23:55:08] GPU #0: GeForce GTX 780, 65827 khash/s
with the bench i had 180-190mhash.
Can someone post a commandline config for gtx780 please?
this is mine cudaminer.exe --algo=keccak -d gtx780 -l K1024x32 -L 128

does a reboot fix it? reduce the x32 to x28, x24 for testing.

add -i 0 maybe.

Hampuz

full member

Activity: 140

Merit: 100

Quote from: 69charger on February 06, 2014, 06:03:28 PM

My balance says 192 Grin

Where do you find that info?

CrystalCoin

member

Activity: 84

Merit: 10

Quote from: Romir on February 06, 2014, 06:02:58 PM

Quote from: CrystalCoin on February 06, 2014, 05:59:39 PM

finally mining! only 140mh on a 780 though?

EDIT: only 70% usage?

Are you running the wallet on the pc you're mining on? That really hurt my utilization when I tried that momentarily.

If I run maxcoin on my laptop and mine on my pc, do I have to change the host? or is local host okay

aikklond

legendary

Activity: 1148

Merit: 1000

I am getting Unable to query CUDA driver version!

I have installed nvidia driver, what should i do?

cbuchner1

hero member

Activity: 756

Merit: 502

Quote from: CrystalCoin on February 06, 2014, 05:59:39 PM

finally mining! only 140mh on a 780 though?

EDIT: only 70% usage?

the code is 24 hours old. It's a miracle it's running at all.

69charger

full member

Activity: 173

Merit: 100

My balance says 192 Grin

Romir

newbie

Activity: 16

Merit: 0

Quote from: CrystalCoin on February 06, 2014, 05:59:39 PM

finally mining! only 140mh on a 780 though?

EDIT: only 70% usage?

Are you running the wallet on the pc you're mining on? That really hurt my utilization when I tried that momentarily.

bugilt

member

Activity: 85

Merit: 10

@maxcoinproject: Adding new Windows binary to github which fixes the issue some particular intel-chip machines were having with CryptoPP

apst14

newbie

Activity: 8

Merit: 0

Why my 780gtx goes so slow?
[2014-02-06 23:54:11] GPU #0: GeForce GTX 780, 66171 khash/s
[2014-02-06 23:54:17] GPU #0: GeForce GTX 780, 64954 khash/s
[2014-02-06 23:54:21] GPU #0: GeForce GTX 780, 69557 khash/s
[2014-02-06 23:54:27] GPU #0: GeForce GTX 780, 65693 khash/s
[2014-02-06 23:54:32] GPU #0: GeForce GTX 780, 65467 khash/s
[2014-02-06 23:54:36] GPU #0: GeForce GTX 780, 67737 khash/s
[2014-02-06 23:54:40] GPU #0: GeForce GTX 780, 88472 khash/s
[2014-02-06 23:54:49] GPU #0: GeForce GTX 780, 52600 khash/s
[2014-02-06 23:54:54] GPU #0: GeForce GTX 780, 50631 khash/s
[2014-02-06 23:54:59] GPU #0: GeForce GTX 780, 48928 khash/s
[2014-02-06 23:55:03] GPU #0: GeForce GTX 780, 58390 khash/s
[2014-02-06 23:55:08] GPU #0: GeForce GTX 780, 65827 khash/s
with the bench i had 180-190mhash.
Can someone post a commandline config for gtx780 please?
this is mine cudaminer.exe --algo=keccak -d gtx780 -l K1024x32 -L 128

Vaxa

full member

Activity: 129

Merit: 100

Can anyone post config for gt 635m?

mmouse

full member

Activity: 162

Merit: 100

Quote from: cbuchner1 on February 06, 2014, 05:56:42 PM

-My Windows client doesn't find peers.

Try using

Quote

onlynet=ipv4

in your config. I think this finally did the trick for me.
All these Micro$oft cloud nodes are on IPv6 which just doesn't work, at least from here.

CrystalCoin

member

Activity: 84

Merit: 10

finally mining! only 140mh on a 780 though?

EDIT: only 70% usage?

sin242

sr. member

Activity: 280

Merit: 250

Quote from: rizardus on February 06, 2014, 05:52:54 PM

Quote from: sin242 on February 06, 2014, 05:51:43 PM

So wait. Forgive me i'm not used to solo mining...

But are you saying my one 670 that's saying "accepted 37/38" has dug up 38 blocks?

yes -.-

can u post your cudaminer conf?

Cudaminer bat

cudaminer --algo=keccak -o http://127.0.0.1:8108 -u xxx -p xxx -d 0 -C 2 -L 128 -H 2 -l K1000x32 -i 0

maxcoin.conf:

addnode=maxcoin.cloudapp.net
addnode=maxcoinus.cloudapp.net
addnode=maxcoinasia.cloudapp.net
addnode=maxexplorer.cloudapp.net
addnode=213.179.202.19
addnode=91.121.8.25
addnode=213.192.56.163:8334

rpcuser= xxx
rpcpassword= xxx
rpcallowip=127.0.0.1
rpcport=8108
server=1
daemon=1
listen=1

@cbuchner1: This is solo atm

cbuchner1

hero member

Activity: 756

Merit: 502

looks like that coin launch was pretty botched.
-My Linux wallet crashes.
-My Windows client doesn't find peers.

but hey, my miner works!!!

bathrobehero

legendary

Activity: 2002

Merit: 1051

ICO? Not even once.

I find it amusing that we have all these softwares to mine, yet our wallets are only trying to connect to one node at a time which gives 5000ms time for a connection. Basically it would take days to try all the nodes.

You can add something like
timeout=500
to your conf so that it only tries to connects to a node for 500 ms before trying the next one which is generally a good idea, but for this coin it might not be due to the heavy load. But still, trying to connect to only one peer at a time?

jeroenn13

hero member

Activity: 644

Merit: 500

I am mining with 18khash/s but no messages like : 30/31 or 1/2.
What is the problem?

I have gen=0 so it wont cpu mine, thats correct right?

CrystalCoin

member

Activity: 84

Merit: 10

I can't get a single peer. heres my conf.

# MaxCoin Example Config
# https://en.bitcoin.it/wiki/Running_Bitcoin#Bitcoin.conf_Configuration_File

# Seed nodes
addnode=180.174.192.180:50300
addnode=maxcoin.cloudapp.net
addnode=maxcoinus.cloudapp.net
addnode=maxcoinasia.cloudapp.net
addnode=maxexplorer.cloudapp.net
addnode=213.179.202.19
addnode=91.121.8.25
addnode=213.192.56.163:8334
addnode=148.251.11.43
addnode=188.226.147.41
addnode=187.104.154.105
addnode=137.226.216.235
addnode=81.174.136.144:64335
addnode=88.207.5.123:50122
addnode=81.174.136.144:64335
addnode=23.97.128.50:1160
addnode=78.149.251.90:11463
addnode=188.226.137.47:34346
addnode=8.35.127.132:52322
addnode=wombat.dar.sh
addnode=87.247.111.39:8668
addnode=84.208.234.214:53438

# Enable RPC
server=1

# RPC information
rpcport=9339
rpcuser=derp
rpcpassword=herp

# Mining
gen=1

Morgahl

member

Activity: 70

Merit: 10

Quote from: bathrobehero on February 06, 2014, 05:46:17 PM

Quote

MaxCoin ‏@maxcoinproject 2m
On Windows, add your config file (https://github.com/Max-Coin/clients/blob/master/example-maxcoin.conf …) to C:\Users\\AppData\Roaming\Bitcoin\bitcoin.conf

Oh, lord.

LOL, they kept doing that all the way up to the release. At least they have fixed this tweet already...

Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 915. (Read 3426922 times)