difficulty 348. to the moon?
No wonder i'm not getting any blocks.
Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 912. (Read 3426991 times)
February 06, 2014, 05:49:58 PM
difficulty 348. to the moon?
No wonder i'm not getting any blocks.
February 06, 2014, 05:48:37 PM
Now it's calmed down, is there a better config for a GTX 570 on keccak than:
-d 0 -L 64 -l F1024x16 -L 128 -i 1
I've overclocked it and it's pushing 100Mh/s but core usage hovers around 91-93% Obviously I'd love to squeeze the other 7-9% out of it.
Found 1 block. It's got 96 confirmations but immature. Christian, do you have a Maxcoin wallet I can send you some for your hard work?
-d 0 -L 64 -l F1024x16 -L 128 -i 1
I've overclocked it and it's pushing 100Mh/s but core usage hovers around 91-93% Obviously I'd love to squeeze the other 7-9% out of it.
Found 1 block. It's got 96 confirmations but immature. Christian, do you have a Maxcoin wallet I can send you some for your hard work?
I have a wallet but no user interface for it at the moment.
I will post a Maxcoin donation address into the README file of future versions.
February 06, 2014, 05:48:18 PM
New wallet?
Yes on Github, it is indeed 7mb but works fine, though the previous one worked fine too for me...I am not finding any blocks with my 155336 khash/s
try mining over night. I've found a dozen or so with 700 MHash/s, so you should find some with 155 MHash!
I sleep in the same room, not going to happen for a worthless coin :p
February 06, 2014, 05:46:23 PM
GTX 760 settings anyone? Thanks!
Yeah, I'm also trying to find the best settings for this card. I tried "-i 0 -C 1 -l K6x24" but it only gave me around 11200 khash/s.
look into the README and start from the example configs in the Keccak (Maxcoin) section
February 06, 2014, 05:45:36 PM
My question is this: I have to 760s running at 90000 Khash each but when I check the debug file in app data it still says my hash rate is like 340 k/hash. Just trying to understand the differentiation here with the keccak alg.
Also how can I check my balance since its only a blank cmd prompt, Ive seen an accepted share, but I dont even know my own wallet address. Thanks!
Also how can I check my balance since its only a blank cmd prompt, Ive seen an accepted share, but I dont even know my own wallet address. Thanks!
Your wallet conf has "gen=1" which means it sets up your CPU to mine, and that's the speed it's showing.
February 06, 2014, 05:44:52 PM
difficulty 348. to the moon?
February 06, 2014, 05:44:19 PM
My question is this: I have to 760s running at 90000 Khash each but when I check the debug file in app data it still says my hash rate is like 340 k/hash. Just trying to understand the differentiation here with the keccak alg.
Also how can I check my balance since its only a blank cmd prompt, Ive seen an accepted share, but I dont even know my own wallet address. Thanks!
Also how can I check my balance since its only a blank cmd prompt, Ive seen an accepted share, but I dont even know my own wallet address. Thanks!
February 06, 2014, 05:43:53 PM
Please help.
I have a GTS 450
I run
cudaminer --algo=keccak -d 0 -o http://127.0.0.1:8180 -O user:pass
and now it says launch configuration f419x2 and gives me approx 3500 KH/s
I think it is too low! what can i do?
Also can I mine with CPU and GPU at the same time?
I have a GTS 450
I run
cudaminer --algo=keccak -d 0 -o http://127.0.0.1:8180 -O user:pass
and now it says launch configuration f419x2 and gives me approx 3500 KH/s
I think it is too low! what can i do?
Also can I mine with CPU and GPU at the same time?
did you autotune that? bad idea.
-l F1000x16 -L 256
upper case F, large number of blocks, warps at the limit of 16 for Fermi please. Lookup gap crazy high.
if you get out of memory drop the 1000 to maybe 500 or 250
February 06, 2014, 05:43:49 PM
February 06, 2014, 05:43:11 PM
I know it was posted before but how do you check if you're actually doing good work? I can't seem to find it 20 some pages back. I haven't gotten a single block yet so I'm starting to worry.
February 06, 2014, 05:42:41 PM
I have in total 500 Mhs and only found 4 blocks. Still have 10 GTX 580 lying around but still don't have time to tune Fermi card with keccak.
How many blocks did you get, Christian ?
How many blocks did you get, Christian ?
impossible to tell, I am running only maxcoind daemons with no user interface.
February 06, 2014, 05:42:27 PM
Please help.
I have a GTS 450
I run
cudaminer --algo=keccak -d 0 -o http://127.0.0.1:8180 -O user:pass
and now it says launch configuration f419x2 and gives me approx 3500 KH/s
I think it is too low! what can i do?
Also can I mine with CPU and GPU at the same time?
I have a GTS 450
I run
cudaminer --algo=keccak -d 0 -o http://127.0.0.1:8180 -O user:pass
and now it says launch configuration f419x2 and gives me approx 3500 KH/s
I think it is too low! what can i do?
Also can I mine with CPU and GPU at the same time?
February 06, 2014, 05:42:18 PM
found 1 block so far with 2x780ti (but i started way late due to node issues..)
February 06, 2014, 05:42:00 PM
GTX 760 settings anyone? Thanks!
Yeah, I'm also trying to find the best settings for this card. I tried "-i 0 -C 1 -l K6x24" but it only gave me around 11200 khash/s.
February 06, 2014, 05:41:39 PM
Someone can help with a GTX 770 config? Im very new to all of this, will send you some Max's if I find any 
February 06, 2014, 05:40:27 PM
February 06, 2014, 05:40:01 PM
WOW.
Even though I'm still probably past the chance of finding a block, I'm just going to leave it running cause it feels so good.
February 06, 2014, 05:39:54 PM
How much is the GTX 780 Ti supposed to get? 
170 MHash typically. You're getting more. Wow.
I have in total 500 Mhs and only found 4 blocks. Still have 10 GTX 580 lying around but still don't have time to tune Fermi card with keccak.
How many blocks did you get, Christian ?
February 06, 2014, 05:39:31 PM
Hi Christian,
i am trying to get Cudaminer going on OSX using this guide:
http://atomton.roon.io/compiling-cudaminer-on-os-x-10-9
Bullshit idea? Or should i give it a try?
If you want pre-compiled binaries for OS X, I have them here: http://www.johnchapman.net/cudaminer/
Also, I have instructions for compiling yourself: http://www.johnchapman.net/crypto-currency/mining-litecoin-on-mac-os-x-with-cudaminer/ (These are a little more complete than the article you are looking at).
thank you very much!
You're very welcome. Let me know if you have any issues with the dependencies, etc.
February 06, 2014, 05:39:23 PM
Now it's calmed down, is there a better config for a GTX 570 on keccak than:
-d 0 -L 64 -l F1024x16 -L 128 -i 1
I've overclocked it and it's pushing 100Mh/s but core usage hovers around 91-93% Obviously I'd love to squeeze the other 7-9% out of it.
Found 1 block. It's got 96 confirmations but immature. Christian, do you have a Maxcoin wallet I can send you some for your hard work?
-d 0 -L 64 -l F1024x16 -L 128 -i 1
I've overclocked it and it's pushing 100Mh/s but core usage hovers around 91-93% Obviously I'd love to squeeze the other 7-9% out of it.
Found 1 block. It's got 96 confirmations but immature. Christian, do you have a Maxcoin wallet I can send you some for your hard work?
Jump to: