I guess 100 UTC won't make me rich
Anyone else here had any luck with UTC ?
Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 962. (Read 3426989 times)
February 01, 2014, 07:14:45 PM
Okay, I am switching back to MicroCoin mining. The only two blocks I ever found for UltraCoin were within the first 15 minutes of the coin launch.
I guess 100 UTC won't make me rich
Anyone else here had any luck with UTC ?
I guess 100 UTC won't make me rich
Anyone else here had any luck with UTC ?
February 01, 2014, 06:50:56 PM
The new autotune is being weird in my case. It finds completely different kernel startup configs around 160 kH/s (Y kernel), while putting the old autotune back to the new commits is always reliable - even with only 1 measurement - which gets around 238 khashes.
Few pages back.
please write a link to latest cudaminer exe build with ability to mine scrypt:2048
Few pages back.
February 01, 2014, 06:45:17 PM
please write a link to latest cudaminer exe build with ability to mine scrypt:2048
February 01, 2014, 06:16:32 PM
Please guys post a shot with a solominig screen for ultracoin?
February 01, 2014, 06:06:46 PM
didn't have much luck with the solo mining.
However, I was able able to grab an invite for the chinese pool. The only one which seems to work.
So if some of you are interested I can send you an invite (I am allowed to 5).
It is a bit overcrowded (around 300 workers) though...
However, I was able able to grab an invite for the chinese pool. The only one which seems to work.
So if some of you are interested I can send you an invite (I am allowed to 5).
It is a bit overcrowded (around 300 workers) though...
February 01, 2014, 06:03:41 PM
I have a GTX 660ti and this config gives me around 216 kh/s
cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 0 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u xxx -p xxx
cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 0 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u xxx -p xxx
I have a 660 non-Ti and I'm getting 238 khashes for N 9 (MRC/UTC) with -l Y5x32 -H 2 -C 0 -m 1 without lookup gap so you might want to try the Y kernel.
Thanks, Y7x32 gives me 270
February 01, 2014, 05:53:46 PM
I have a GTX 660ti and this config gives me around 216 kh/s
cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 0 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u xxx -p xxx
cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 0 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u xxx -p xxx
I have a 660 non-Ti and I'm getting 238 khashes for N 9 (MRC/UTC) with -l Y5x32 -H 2 -C 0 -m 1 without lookup gap so you might want to try the Y kernel.
February 01, 2014, 05:46:29 PM
--algo=scrypt-jane:UTC -D -i 0 -H 2 -C 1 -l Y6x32 this on my gtx760 i get 280khs /s , this is what i get for litecoin too. But why i dont get this "cannot be validated with the cpu" error with the absurd result 3000khs , like i get when i mine litecoin?
February 01, 2014, 05:39:24 PM
I am trying to mine solo ultracoin , but autotunes goes mad , so i put my settings manualy and at 9x36 i got this which probably is not true , but what should i get if i solo mine, is this i got new job what i should get?
try 7x32
February 01, 2014, 05:35:24 PM
can someone post the wallet?! this is driving me mad
February 01, 2014, 05:34:34 PM
I am trying to mine solo ultracoin , but autotunes goes mad , so i put my settings manualy and at 9x36 i got this 
which probably is not true , but what should i get if i solo mine, is this i got new job what i should get?
which probably is not true , but what should i get if i solo mine, is this i got new job what i should get? February 01, 2014, 05:16:47 PM
i am unable to compile the main wallet source or run the one on their website :s
February 01, 2014, 05:04:35 PM
If people have trouble getting UTC working, try this:
Get the binary from silverwolf_ru in the post above.
You'll have the latest build, only the .exe
Download original 12-18 version, copy de dll's into the folder with the new cudaminer.exe
Create .bat file with the following:
cudaminer --algo=scrypt-jane:UTC followed by the rest.
I have a GTX 660ti and this config gives me around 216 kh/s
cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 0 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u xxx -p xxx
At moment of writing the pool is not working, give it some time.
Get the binary from silverwolf_ru in the post above.
You'll have the latest build, only the .exe
Download original 12-18 version, copy de dll's into the folder with the new cudaminer.exe
Create .bat file with the following:
cudaminer --algo=scrypt-jane:UTC followed by the rest.
I have a GTX 660ti and this config gives me around 216 kh/s
cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 0 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u xxx -p xxx
At moment of writing the pool is not working, give it some time.
Even with solo mining you can still find blocks
I just found one, worth 50 Ultracoins. Don't forget to tune for -l F/ X / Y / Z (depending on Fermi / Kepler architecture) and write down the fastest configurations. I am doing well on my 560Ti with -m 1 -C 1 -H 2 -i 0 an kernel F16x8How to set up solo mining?
February 01, 2014, 04:56:58 PM
If people have trouble getting UTC working, try this:
Get the binary from silverwolf_ru in the post above.
You'll have the latest build, only the .exe
Download original 12-18 version, copy de dll's into the folder with the new cudaminer.exe
Create .bat file with the following:
cudaminer --algo=scrypt-jane:UTC followed by the rest.
I have a GTX 660ti and this config gives me around 216 kh/s
cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 0 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u xxx -p xxx
At moment of writing the pool is not working, give it some time.
Get the binary from silverwolf_ru in the post above.
You'll have the latest build, only the .exe
Download original 12-18 version, copy de dll's into the folder with the new cudaminer.exe
Create .bat file with the following:
cudaminer --algo=scrypt-jane:UTC followed by the rest.
I have a GTX 660ti and this config gives me around 216 kh/s
cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 0 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u xxx -p xxx
At moment of writing the pool is not working, give it some time.
Even with solo mining you can still find blocks
I just found one, worth 50 Ultracoins. Don't forget to tune for -l F/ X / Y / Z (depending on Fermi / Kepler architecture) and write down the fastest configurations. I am doing well on my 560Ti with -m 1 -C 1 -H 2 -i 0 an kernel F16x8 February 01, 2014, 04:51:02 PM
ok so i just downloaded the linux wallet from ultracoin's website and it wont run, am i missing something?
"./Ultracoin-qt: error while loading shared libraries: libminiupnpc.so.9: cannot open shared object file: No such file or directory"
also does anyone has a copy of their config for the server i can use? mainly just the node
"./Ultracoin-qt: error while loading shared libraries: libminiupnpc.so.9: cannot open shared object file: No such file or directory"
also does anyone has a copy of their config for the server i can use? mainly just the node
February 01, 2014, 04:45:47 PM
If people have trouble getting UTC working, try this:
Get the binary from silverwolf_ru in the post above.
You'll have the latest build, only the .exe
Download original 12-18 version, copy de dll's into the folder with the new cudaminer.exe
Create .bat file with the following:
cudaminer --algo=scrypt-jane:UTC followed by the rest.
I have a GTX 660ti and this config gives me around 216 kh/s
cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 0 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u xxx -p xxx
At moment of writing the pool is not working, give it some time.
Get the binary from silverwolf_ru in the post above.
You'll have the latest build, only the .exe
Download original 12-18 version, copy de dll's into the folder with the new cudaminer.exe
Create .bat file with the following:
cudaminer --algo=scrypt-jane:UTC followed by the rest.
I have a GTX 660ti and this config gives me around 216 kh/s
cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 0 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u xxx -p xxx
At moment of writing the pool is not working, give it some time.
February 01, 2014, 04:18:20 PM
If anyone needs the latest binary I have compiled it once more. http://rghost.ru/52135455 Works just dandy with Ultracoin. My GTX 560Ti is getting around 57 kilohashes currently.
You sir, saved my fucking life. I can't express how happy I am, it's working!
You are welcome! I'm happy to help out in any way I can sir
Hope the binary works for you. February 01, 2014, 04:13:38 PM
If anyone needs the latest binary I have compiled it once more. http://rghost.ru/52135455 Works just dandy with Ultracoin. My GTX 560Ti is getting around 57 kilohashes currently.
You sir, saved my fucking life. I can't express how happy I am, it's working!
February 01, 2014, 04:11:38 PM
If anyone needs the latest binary I have compiled it once more. http://rghost.ru/52135455 Works just dandy with Ultracoin. My GTX 560Ti is getting around 57 kilohashes currently.
February 01, 2014, 03:58:47 PM
for UltraCoin, use --algo=scrypt-jane:UTC in the latest github
their wallet and everything can be found here: http://www.ultracoin.net/
I've already solo'ed my first 100 UTC. And they mature quickly. Quicker than any other coin I've mined so far.
their wallet and everything can be found here: http://www.ultracoin.net/
I've already solo'ed my first 100 UTC. And they mature quickly. Quicker than any other coin I've mined so far.
What's the full code, i get this?
cudaminer --algo=scrypt-jane:UTC -l K7x32 -C 1 -i 1 -m 0 -o stratum+tcp://pickaxe.pool.pm:3306 -u XXXX -p X
Something is still wrong
Jump to: