Topic: [ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65% - page 342. (Read 1260624 times)

SUP UtahJ - https://bitcointalksearch.org/topic/m.14120496
I built it on Ubuntu and it work fine with my 390X - it requires 2GB of GPU memory at this time.
When the DAG gets bigger than 2GB, they you have to get better GPUs.

I'm testing my old 5970 tonight, but I'll bet it works fine.
 

Thank you!

ty @cryptonit - most appreciated!

can we get feedback by people who did setup their ROKO powered raspberry PI2 and stake DMD there
https://bitcointalksearch.org/topic/m.14131775

good news we had over 1000 finished BTC -> DMD Conversion rounds at https://multipool.bit.diamonds/
average of two times daily since its start (most days one multipool and one cloudmining payout rounds which both use same BTC-DMD conversion engine)

to celebrate this today i double the DMD CLoudmining payout out of my own pocket

enjoy!



over 213000 DMD redistributed between multipool and cloudmining users another great number!

please contact the pool operators with that questions
we are busy prepare wallet 2.1
to busy to hold-pool-operators hands
we did tell them and community to spread hashrate between pools so the dont
damage their user and waste their electricity

but always one pool ends at above 25% of total generated blocks
which means over 50% of POW hashrate (because 50% of our blocks are POS blocks)

and so much hashrate at a single pool create a high risc that the pool can fork himself away

the way DMD Diamond network is secured with hybrid POW/POS security
its the pool and his miners just damage himself

the network itself stay unharmed

there is a responsibility at pool owners and pool users to make sure hashrate split between pools

if pools and pool user cant manage this then the network just fine by driven by solo miners at it is now

its time miners mature a bit a not jump aways mining on biggest pool

same as now we have two working pools and all just jump mining on one......

No, it doesn't have integrated graphics. DMD mining is working flawless with sgminer, but if I want to use NicehashMiner or etherminer to mine ether it's not working.

hello

my question the dmd.miningfield.com and http://dmdpool.digsys.bg/ back online sometime ? the new poll the http://dmd.cryptopools.com not so good cpu mining not work (no share found) the old pools works fine with cpu mining
And net Hasrate 1,804.75 MH/s and pool http://dmd.cryptopools.com 500 mh/s so my question wich pool work 1000 mhs i not found .
thank you bye

Does your mobo maybe have integrated graphics? I ve had a situation where it tried to mine with that GPU by default. Even 5970 s at the edge of being useful for Ether. Anything lower then 280x level s not that fun.

I have 2xRadeon 5970 each one has 2Gb Ram. The system RAM is 12GB. Without the -G I think the CPU was mining as you are saying...
What is GPU memory fragmentation?

Thanks,
Bogdan

ROKOS v5 Flavors Released!

Support thread: ROKOS Flavors

Visit the New ROKOS website at: http://rokos.space


ROKOS v5 "Flavors" Released. Full OS with Cryptocurrency Clients, full nodes and much more. Faster, Easier, Stronger.



We've seen new services selling "stake miners" for different currencies, we support the new technology and uses for cryptocurrencies in the Raspberry Pi environments, hence we came up with a Free solution for every IoT enthusiast, developer, user, service that want to use their IoT devices with BTC, OK and more cryptocurrencies, or that would like to turn their Pi into a Staking device, It already integrates a fully functional Bitcoin + 11 Cryptocurrencies Clients and nodes as well to provide the users with the best and easier Out of the Box experience.


The First OS image release that merges the full power of Raspberry Pi 2, Banana Pi PRO & IoT Devices with Bitcoin and Cryptocurrencies:
- ROKOS v5 "Flavors" comes with integrated Cryptocurrencies Clients / nodes .


Specs:

v5 "flavors" Release (Pi2) March 07 2016
- Full burnable OS Compatible with the Raspberry Pi systems.
- Full System / Programs Upgrade.
- Full Design Upgrade.
- Iceweasel browser.
- Autolog.
- Debian.
- Java Dev Tools.
- Easier to Use mod Update.
- Security and Optimization Update.
- Updated Out of the box Firewall ready for use (gui) (start in terminal: gufw)
- Includes Qt and complete set of Dev tools (For developers)
- Includes Qt 3.2.1 Native / Qt 5.5.1 for Cross compile !
- Works with other cryptocurrencies.
- 1024mb swap mod.
- Updated Cryptocurrencies Included:
Bitcoin, OKCash, Blackcoin, Gamecredits, Digitalcoin, Diamondcoin,
Energycoin, Europecoin, Soil, Metalcoin, Transfercoin, Mojocoin. (Readme.txt)
- Custom Login and Wallpapers.
- Cryptocurrencies nodes at /usr/local/bin/
- Easy Clients / Nodes Upgrades.
- Direct access to the Clients Via: Task bar and Menu > Internet.
- ZIP file - Compression: 2.2Gb image to download, 6.1GB uncompressed to burn.


Requirements:
ROKOS v5 "flavors":
- Raspberry Pi 2 (Pi2 full power use by debian jessie base)

- Min 8gb SD card and an External device (usb / hdd / ssd). To sync the Cryptocurrencies chains on the external device instead of the SD card.


Future Versions:
- Security updates.
- Chain Updates.
- More Cryptocurrencies will be integrated for an Out of the Box experience and adoption.
- Designs Updates.
- More wallets, programs or features, based on users/communities/developers feedback, support and/or cross collaborations.






*Raspberry Pi 2:
User: pi / Password: raspberry , follow normal setup.

a) Type: sudo raspi-config
b) Set your Time Zone, change your pi user password and Expand the file system, restart.
After restart the system you can type:  "startx"   to start the user desktop.
c) System ready for use.



a) Go to Menu > Internet and Click on your favorite Cryptocurrency Wallet

This will open the Cryptocurrency wallet and start sync.

*For some Cryptocurrencies the initial sync might take some days, wallets are fully usable after being fully Synchronized.



b) Always remember to make constant backups of your wallets and save them in USB or external media.

Use your wallets in ROKOS to plug HW and mine, Send/Receive, Stake, Share,
become a full node and support your favorite Cryptocurrency network, develop new applications,
etc, the limit is only in your imagination.


Important Security Notice:
*) Remember to create a backup for your Wallets, you can use the wallets to create them and save in different folders on a USB device.
You should ALWAYS have a backup of your wallet, Raspberry Pi Hardware, Raspbian and ROKOS Software are under development hence not responsible for missuses, electrical or compatibility issues that might cause a loss of information. It is as secure as one's ability to take care for it, same as a computer, so always have a backup of your wallets on an external device.

*) Some people tend to recommend getting a 128Gb MicroSD HC (High speed) , at the same time it does work, I do not recommend this solution, as microSD cards tend to get corrupted by the number of overwrites, to ensure the best functionality and security you should use an external HDD/USB storage device to store the chains.


You can start testing and developing new integration with ROKOS and your favorite cryptocurrencies for your IoT projects.







(I did this on a Windows computer, and I dont know what tool to use for Mac to install the iso file Image burner, for this guide you will have to figure out that yourself, if you use Mac)

1. Download and install SD Formatter 4.0 (This is the tool to format the SD card) from:
Windows: https://www.sdcard.org/downloads/formatter_4/eula_windows/SDFormatterv4.zip
Mac: https://www.sdcard.org/downloads/formatter_4/eula_mac/SDFormatter_4.00B.pkg
(or find it yourself at: https://sdcard.org/downloads)

2. Insert the MicroSD/MicroSDHC card into your PC/Mac. (You will probably need an MicroSD to SD adapter for this).

3. Start SD Formatter 4.0 and click the [Option] button. In there you change from "FORMAT TYPE: QUICK" to "FORMAT TYPE: (FULL)Erase", just leave the "FORMAT SIZE ADJUSTMENT" in OFF and click the [OK] button so start the format. When the card is completely formatted click the [Exit] button to close SD Formatter.

4. Download and install Win32 Disk Imager (This is the iso file Image burner) from:
Windows: http://sourceforge.net/projects/win32diskimager/files/latest/download

5. Download ROKOS Core (rokos5.img.zip) and unzip the ISO file (This is the awesome ROKOS Core "Operating System" that we are going to install on the SD card) from:
Download: http://bit.ly/rokos5flavors
(or find it yourself at: http://rokos.space

6. Start Win32 Disk Imager, press the "little blue folder" and select the "rokos5.img" file that you did extract. Make sure your SD card is selected in the list to the right and press the [Write] button. It will tell you that it can corrupt the SD card, just press [Yes] to continue the installation, when the installation to the SD card is done press the [Exit] button to close Win32 Disk Imager.

7. Now "Safely remove" your SD card from the computer.

8. Put the MicroSD/MicroSDHC card in your Raspberry Pi 2, and make sure you got an USB Keyboard, Monitor (via HDMI), and and Internet cable connected to the Raspberry Pi 2 before you connect the power cable to your Raspberry Pi 2.




1. Type:
(and press enter)

2. Select:
(and press enter) press enter again on the button.

3. Select:

Code:

2. Change user password

(and press enter) press enter again on the button. Type a new password (you will not see the letters) and press enter, type your new password again, and press enter. Then press the button.

4. Select:

Code:

5. Internationalization Options

(and press enter) Then select:

Code:

I2. Change Timezone

(Choose your timezone)

5. Press the "TAB" button on your keyboard two times to get to the button, and press enter. Then choose to restart your system.

6. Type:

Code:

startx

(and press enter) your system will now start up and you are DONE!

ENJOY THIS AWESOME OPERATING SYSTEM!

Requires 3G mem on card I think I read somewhere, what GPU u using (I have 280x and 7950) both 3G mem and 4G system ram in mining rig

without the -G you were mining with CPU or not at all?
 
From the help file:
   -G,--opencl  When mining use the GPU via OpenCL.

The algorithm is memory hard and in order to fit the DAG into memory, it needs 1-2GB of RAM on each GPU. If you get Error GPU mining. GPU memory fragmentation? you havent got enough memory.

You need to have a decent GPU. Low end cards cannot mine Ether. What do you have?

Thanks a lot.

I tried also with -G but it won't work. Says something about not enough memory....

So yes I used also the address to check my stats but it shows nothing and it's more than 24 hours since I mined on nicehash.

Seems I have to search deeper

here is my batch file for 2 gpu's
appears you are missing the -G

Only pays out once a day, look for immature and unexchanged to see if you are mining

Check you stats using something similar:
https://www.nicehash.com/?p=miners&addr=1HANJQygp3jHuzutceBgMT7wfCgEug6h4L&a=999&l=1

Can you show me the command line/conf file? I tried also with ethminer and seems to work but nothing shows in my BTC address from nicehash.
I launch the ethminer with this command:

ethminer.exe -F http://ethereum.eu.nicehash.com:3500/n1c3-1C1MYUCjEe38qfARgStV62LwiRPm8CEUT6.amdrig/20

It shows that it mines but nothing in my BTC wallet

dunno, nicehash eth pool seemed to be down for a few hours, up now but I am mining with ethminer not the nicehash miner.

How can you mine Ether with this new version of NiceHashMiner? It seems I can't make it working... It always starts mining X11.

i think its sometimes hard to grasp and prooves, there isn't alwais a conscious decission
of a thinking human behind evenrs like this, some People are acting more less random ...

Matthias

Who sold his coins at 31k last night on Bittrex? It must be a very desperate person...