[ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 138.

NameTaken

hero member

Activity: 630

Merit: 502

Quote from: srgmnr on October 22, 2017, 05:50:11 AM

I am trying to test zm on debian
BUT:

$./zm
./zm: /usr/lib/x86_64-linux-gnu/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by ./zm)
./zm: /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0: version `OPENSSL_1.0.0' not found (required by ./zm)

what I should to fix?

BTW
I have already made links
#ln -n libcrypto.so.1.1 libcrypto.so.1.0.0
#ln -n libssl.so.1.1 libssl.so.1.0.0

https://bitcointalksearch.org/topic/m.22078213

slazarov

newbie

Activity: 8

Merit: 0

Miner seems to produce around 4% increase in hash rate.
However, on one of my machines the miner crashes and exits without trace.
A log function would be great.

srgmnr

jr. member

Activity: 37

Merit: 3

I am trying to test zm on debian
BUT:

$./zm
./zm: /usr/lib/x86_64-linux-gnu/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by ./zm)
./zm: /usr/lib/x86_64-linux-gnu/libssl.so.1.0.0: version `OPENSSL_1.0.0' not found (required by ./zm)

what I should to fix?

BTW
I have already made links
#ln -n libcrypto.so.1.1 libcrypto.so.1.0.0
#ln -n libssl.so.1.1 libssl.so.1.0.0

akuci

full member

Activity: 226

Merit: 100

It's still a bit CPU heavy since I use my CPUs to mine VRM or XMG at the same time, so DSTM might consider fixing that, or minimizing the CPU usage atleast.

Supercoiner111

full member

Activity: 490

Merit: 100

this is interesting some mixed results from the replies, I will test this when I get back....

djazher

newbie

Activity: 41

Merit: 0

48 hours running straight, so far so good.

On top of the hashrate improvement, I find the global hashrate more stable. Less differences per round. With EWBF, I was getting highs @7.6Ksols/s and lows @5.8Ksols/s. Not sure if it has to be put on ZM's credit, but it's a fact.

Another suggestion, same as with EWBF, it would be pretty nice to have an option for TDP per GPU. If it's useless to almost all experienced users, it's always good to have that information handy in a single window, not having to run NVIDIA-SMI. And it does impress my girlfriend, who thinks I'm a computer mastermind ¨^^¨

davidsuswanto

newbie

Activity: 15

Merit: 0

try from ewbf avg 2700sol and now 2900sol on dstm! good works!

dstm

full member

Activity: 350

Merit: 126

Quote from: Ryuh on October 21, 2017, 03:26:58 PM

I have problems when i try miner with HUSH on pool.miningspeed.com with my 1070 rigs.
When i start the miner it says [20, "invalid solution XX"] as XX is number between 28-32.

Funny thing is that it works great on suprnova when i try it there.
Maybe its something with the pool config or its the miner, but i want to report it anyway.

I'm able to reproduce this.
Looks like a bug on the server side to me.

dstm

full member

Activity: 350

Merit: 126

Quote from: Kayfolom on October 22, 2017, 02:40:10 AM

Please add miner uptime in telemetry.
How can I get a json via http?

Uptime: it was already requested, will add.

Json-rpc isn't transferred on top of http.

dstm

full member

Activity: 350

Merit: 126

Quote from: UrsaUrsa on October 22, 2017, 12:48:47 AM

@dstm: First of all thanks for your hard work.

Secondly, your miner started erroring out after a few hours please see below. Any ideas?

Thx for reporting, this is a bug - will be fixed in next release.

dstm

full member

Activity: 350

Merit: 126

Quote from: yobigd20 on October 21, 2017, 10:19:56 PM

I can't get this miner to work on Win10 at all. I've tried many different settings. No luck.

zm_win_0.5.2\zm --server zen.suprnova.cc --port 3618 --user myuser.mywoker --pass x
(obviously i replace myuser and myworker with my own stuff)

and i get this:
# GPU0 connected to: zen.suprnova.cc:3618
connect failed: 10061

same thing for zcash.

zm_win_0.5.2\zm>zm --server us1-zcash.flypool.org --port 3333 --user mywallet.myrigname --pass x
# GPU0 connected to: us1-zcash.flypool.org:3333
connect failed: 10061

i just keep getting these 10061 errors.

Do you block some ports?

dstm

full member

Activity: 350

Merit: 126

Quote from: shibob on October 21, 2017, 09:21:01 PM

All of my rigs stopped after about 17 working hours. I'm not sure how to fix this:"Application zm.exe has been blocked from accessing Graphics hardware".

https://imgur.com/a/Os3jm

This seems to happen when the GPU driver crashes.
Are your GPUs overclocked?
Did zm report any errors?

raven1322

full member

Activity: 171

Merit: 105

Quote from: induktor on October 21, 2017, 10:51:12 PM

Quote from: The_Immortal on October 21, 2017, 01:27:53 PM

induktor,

Quote from: induktor on October 21, 2017, 10:25:34 AM

card: 1 x1080 Ti
...
Hash rate at top efficiency: 600 Sols average (15 Sols more than EWBF miner)
...

Is it a joke or a mistake? 1080Ti should give u from 750 to 790 sol (in OC mode) and from 695 to 750 (in non-OC mode) on EWFB. What 600 Sol/s are u talking about, man?

Top eficiency means, maximum hashrate at the lowest possible power usage (hash/Watts)
unless you don't pay for electricity, i pay a fortune for power, so i keep my miners at top efficiency all the time to get maximum profit.

At least so far is what i got, still have to test other drivers/miners, but everything so far points to 600 Sols at 140 watts (155 at the wall)

I agree with efficiency being a huge factor specially when power is expensive. That being said, how’d you manage a 1080Ti to pull only 140W? Can’t go below 200W on my strix oc’s..

Kayfolom

member

Activity: 68

Merit: 10

Please add miner uptime in telemetry.
How can I get a json via http?

UrsaUrsa

member

Activity: 104

Merit: 11

@dstm: First of all thanks for your hard work.

Secondly, your miner started erroring out after a few hours please see below. Any ideas?

Makak4R

full member

Activity: 266

Merit: 111

Quote from: grchina on October 21, 2017, 02:56:22 PM

Can someone post results for 1080ti with dual core cpu?Would be nice to know how cpu heavy it is

yes, sure, I posted before, the rig with 4x1080ti and G4560 is working on windows 10
it shows like 730-740 sol/s per card, a little low comparing to ewbf, but I guess that's cause of the cpu, in fact it should push around 770-790 if pared with properly overclocked and good 4core cpu
and all is working stable, just speed is a little low

induktor

hero member

Activity: 710

Merit: 502

Quote from: The_Immortal on October 21, 2017, 01:27:53 PM

induktor,

Quote from: induktor on October 21, 2017, 10:25:34 AM

card: 1 x1080 Ti
...
Hash rate at top efficiency: 600 Sols average (15 Sols more than EWBF miner)
...

Is it a joke or a mistake? 1080Ti should give u from 750 to 790 sol (in OC mode) and from 695 to 750 (in non-OC mode) on EWFB. What 600 Sol/s are u talking about, man?

Top eficiency means, maximum hashrate at the lowest possible power usage (hash/Watts)
unless you don't pay for electricity, i pay a fortune for power, so i keep my miners at top efficiency all the time to get maximum profit.

At least so far is what i got, still have to test other drivers/miners, but everything so far points to 600 Sols at 140 watts (155 at the wall)

TheHas

full member

Activity: 616

Merit: 167

Nice work! How does it perform on lower power usage settings (like around 70 percent limit mark). I've got expensive electricity and trying to find the 'sweet spot' so to speak.

yobigd20

member

Activity: 170

Merit: 10

I can't get this miner to work on Win10 at all. I've tried many different settings. No luck.

zm_win_0.5.2\zm --server zen.suprnova.cc --port 3618 --user myuser.mywoker --pass x
(obviously i replace myuser and myworker with my own stuff)

and i get this:
# GPU0 connected to: zen.suprnova.cc:3618
connect failed: 10061

same thing for zcash.

zm_win_0.5.2\zm>zm --server us1-zcash.flypool.org --port 3333 --user mywallet.myrigname --pass x
# GPU0 connected to: us1-zcash.flypool.org:3333
connect failed: 10061

i just keep getting these 10061 errors.

shibob

full member

Activity: 672

Merit: 154

Blockchain Evangelist.

All of my rigs stopped after about 17 working hours. I'm not sure how to fix this:"Application zm.exe has been blocked from accessing Graphics hardware".

https://imgur.com/a/Os3jm

Topic: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 138. (Read 224961 times)