⚡[ANN]⚡ ▐░Espers [ESP]░▌▐░PoW/PoS░▌▐░HMQ1725 Algo░▌ ▐░New Features░▌ - page 417.

Samai

hero member

Activity: 781

Merit: 1000

Quote from: tZKtdvt6 on September 25, 2016, 04:41:48 AM

Quote from: Samai on September 25, 2016, 04:15:24 AM

Quote from: tZKtdvt6 on September 25, 2016, 04:11:38 AM

Quote from: Samai on September 25, 2016, 02:15:07 AM

Quote from: tZKtdvt6 on September 25, 2016, 12:54:43 AM

Hello,
Can anyone say to me why rpc commands doesn't work?,
I have downloaded the #1 post config file there linked.
Is all correct or isn't it?

Of course I set my own rpcuser and my rpcpassword.

Thanks!

Nodelist is wrong https://bitcointalksearch.org/topic/m.16351982 config sample wrong too! v1 and v2 have a different port and place folder. Be carefull!

Simple ESP v2 config is:

Code:

rpcuser=your_name
rpcpassword=your_pass
rpcport=22442
server=1
port=22448

Yea… port is 22448, but command-line options return to you …15714 port! Grin

https://github.com/CryptoCoderz/Espers/blob/master/src/init.cpp#L183 or 15715 as rpcport, on 50 languages. Grin

I only get ERROR!
Are you completely sure of you have written?

Differents wallets respond to this utility by rpc.

What commands you tried? what wallet version?

sendtoaddress

The same command by rpc works fine with others wallets, then I suppossed that the mistake was at esp.config.

The file is: Espers-v0.8.4.2-Patch-2.zip

Wallet work fine, your config file must be named Espers.conf

tZKtdvt6

full member

Activity: 166

Merit: 100

Developer

The utility which I am developing is written at vb.net, (.net 4.0), and it uses the bitnet library which uses
the dll's of:
http://www.newtonsoft.com/json
https://github.com/JamesNK/Newtonsoft.Json

tZKtdvt6

full member

Activity: 166

Merit: 100

Developer

Quote from: Samai on September 25, 2016, 04:15:24 AM

Quote from: tZKtdvt6 on September 25, 2016, 04:11:38 AM

Quote from: Samai on September 25, 2016, 02:15:07 AM

Quote from: tZKtdvt6 on September 25, 2016, 12:54:43 AM

Hello,
Can anyone say to me why rpc commands doesn't work?,
I have downloaded the #1 post config file there linked.
Is all correct or isn't it?

Of course I set my own rpcuser and my rpcpassword.

Thanks!

Nodelist is wrong https://bitcointalksearch.org/topic/m.16351982 config sample wrong too! v1 and v2 have a different port and place folder. Be carefull!

Simple ESP v2 config is:

Code:

rpcuser=your_name
rpcpassword=your_pass
rpcport=22442
server=1
port=22448

Yea… port is 22448, but command-line options return to you …15714 port! Grin

https://github.com/CryptoCoderz/Espers/blob/master/src/init.cpp#L183 or 15715 as rpcport, on 50 languages. Grin

I only get ERROR!
Are you completely sure of you have written?

Differents wallets respond to this utility by rpc.

What commands you tried? what wallet version?

sendtoaddress

The same command by rpc works fine with others wallets, then I suppossed that the mistake was at esp.config.

The file is: Espers-v0.8.4.2-Patch-2.zip

Samai

hero member

Activity: 781

Merit: 1000

Quote from: tZKtdvt6 on September 25, 2016, 04:11:38 AM

Quote from: Samai on September 25, 2016, 02:15:07 AM

Quote from: tZKtdvt6 on September 25, 2016, 12:54:43 AM

Hello,
Can anyone say to me why rpc commands doesn't work?,
I have downloaded the #1 post config file there linked.
Is all correct or isn't it?

Of course I set my own rpcuser and my rpcpassword.

Thanks!

Nodelist is wrong https://bitcointalksearch.org/topic/m.16351982 config sample wrong too! v1 and v2 have a different port and place folder. Be carefull!

Simple ESP v2 config is:

Code:

rpcuser=your_name
rpcpassword=your_pass
rpcport=22442
server=1
port=22448

Yea… port is 22448, but command-line options return to you …15714 port! Grin

https://github.com/CryptoCoderz/Espers/blob/master/src/init.cpp#L183 or 15715 as rpcport, on 50 languages. Grin

I only get ERROR!
Are you completely sure of you have written?

Differents wallets respond to this utility by rpc.

What commands you tried? what wallet version?

tZKtdvt6

full member

Activity: 166

Merit: 100

Developer

Quote from: Samai on September 25, 2016, 02:15:07 AM

Quote from: tZKtdvt6 on September 25, 2016, 12:54:43 AM

Hello,
Can anyone say to me why rpc commands doesn't work?,
I have downloaded the #1 post config file there linked.
Is all correct or isn't it?

Of course I set my own rpcuser and my rpcpassword.

Thanks!

Nodelist is wrong https://bitcointalksearch.org/topic/m.16351982 config sample wrong too! v1 and v2 have a different port and place folder. Be carefull!

Simple ESP v2 config is:

Code:

rpcuser=your_name
rpcpassword=your_pass
rpcport=22442
server=1
port=22448

Yea… port is 22448, but command-line options return to you …15714 port! Grin

https://github.com/CryptoCoderz/Espers/blob/master/src/init.cpp#L183 or 15715 as rpcport, on 50 languages. Grin

I only get ERROR!
Are you completely sure of you have written?

Differents wallets respond to this utility by rpc.

Samai

hero member

Activity: 781

Merit: 1000

Quote from: tZKtdvt6 on September 25, 2016, 12:54:43 AM

Hello,
Can anyone say to me why rpc commands doesn't work?,
I have downloaded the #1 post config file there linked.
Is all correct or isn't it?

Of course I set my own rpcuser and my rpcpassword.

Thanks!

Nodelist is wrong https://bitcointalksearch.org/topic/m.16351982 config sample wrong too! v1 and v2 have a different port and place folder. Be carefull!

Simple ESP v2 config is:

Code:

rpcuser=your_name
rpcpassword=your_pass
rpcport=22442
server=1
port=22448

Yea… port is 22448, but command-line options return to you …15714 port! Grin

https://github.com/CryptoCoderz/Espers/blob/master/src/init.cpp#L183 or 15715 as rpcport, on 50 languages. Grin

vhong

sr. member

Activity: 361

Merit: 250

Quote from: alexcfr on September 25, 2016, 02:00:39 AM

Wallet working on pi3

It's good to know, now I'm planning to try it out on Pi 3 too.

alexcfr

sr. member

Activity: 304

Merit: 250

Wallet working on pi3

tZKtdvt6

full member

Activity: 166

Merit: 100

Developer

Hello,
Can anyone say to me why rpc commands doesn't work?,
I have downloaded the #1 post config file there linked.
Is all correct or isn't it?

Of course I set my own rpcuser and my rpcpassword.

Thanks!

Gandalf86

hero member

Activity: 1330

Merit: 515

Coin Mage

Quote from: CryptoCoderz on September 24, 2016, 04:23:22 PM

Quote from: neguinho on September 24, 2016, 02:30:50 PM

and The Mining Huh

(...)
As for the in-wallet mining we are wrapping up the feature.
Remember it will be using optimized miners and will allow you control them from within the client.

It's funny how people take things for granted when in times of Litecoin it was completely normal to pay big $$$ for dedicated GPU miners. It still is, devs just paid that money on their own to integrate it into the wallet for free, and people are still whining about why it takes so long. xD

If you want it sooner, you should better have paid your own $700 some months ago for someone to write it for you.

CryptoCoderz

hero member

Activity: 1036

Merit: 506

Coderz of the Crypto variety

Quote from: neguinho on September 24, 2016, 02:30:50 PM

and The Mining Huh

The same miners are available as with ESP1.
Pools seem to be sluggish in recompiling clients and as such solo mining is probably your best bet.

As for the in-wallet mining we are wrapping up the feature.
Remember it will be using optimized miners and will allow you control them from within the client.

neguinho

hero member

Activity: 561

Merit: 500

Quote from: CryptoCoderz on September 24, 2016, 12:42:31 PM

Quote from: EpyxZ on September 24, 2016, 08:42:37 AM

So many people having probs. Think there needs to be an old esp1 wallet & new esp2 wallet added to top of the op, too many people are sending esp1 to esp2 addy and vice versa.

Agreed. We'll get that done really quick.

Quote from: Samai on September 24, 2016, 06:33:30 AM

Quote from: tamara163 on September 24, 2016, 05:41:25 AM

0 active connections to the network since the last update of the wallet. node list does not help. Huh

?

Node list is wrong. Doesn't use it!

Code:

addnode=208.68.36.6:22448
addnode=107.170.212.222:22448

We'll update the list shortly.

Here are the current ESP2 nodes:
104.236.150.155:22448
159.203.24.196:22448
46.101.188.194:22448
173.18.196.253:22448
208.68.36.6:22448
146.185.153.196:22448
188.166.155.131:22448
107.170.212.222:22448
159.203.12.73:22448

Quote from: alexcfr on September 24, 2016, 04:48:44 AM

thanks !

edit:
just try, got this, any idea ?

md_helper.c: In function 'void sha384_addbits_and_close(void*, unsigned int, unsigned int, void*, unsigned int)':
md_helper.c:248:5: warning: invalid conversion from 'void*' to 'sph_sha384_context*' [-fpermissive]
sc = cc;
^
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/root/Espers/src -I/root/Espers/src/obj -DENABLE_WALLET -I/root/Espers/src/leveldb/include -I/root/Espers/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/db.d -o obj/db.o db.cpp
db.cpp:20:19: fatal error: QString: Aucun fichier ou dossier de ce type
#include
^
compilation terminated.
makefile.unix:198: recipe for target 'obj/db.o' failed

Sorry about that! :/ just had to define that currently that section corresponds to the launcher for windows until it's finished being ported later.

Anyway same drill as last time, please re-download from GitHub and you shouldn't have any more issues.

and The Mining Huh

CryptoCoderz

hero member

Activity: 1036

Merit: 506

Coderz of the Crypto variety

Quote from: EpyxZ on September 24, 2016, 08:42:37 AM

So many people having probs. Think there needs to be an old esp1 wallet & new esp2 wallet added to top of the op, too many people are sending esp1 to esp2 addy and vice versa.

Agreed. We'll get that done really quick.

Quote from: Samai on September 24, 2016, 06:33:30 AM

Quote from: tamara163 on September 24, 2016, 05:41:25 AM

0 active connections to the network since the last update of the wallet. node list does not help. Huh

?

Node list is wrong. Doesn't use it!

Code:

addnode=208.68.36.6:22448
addnode=107.170.212.222:22448

We'll update the list shortly.

Here are the current ESP2 nodes:
104.236.150.155:22448
159.203.24.196:22448
46.101.188.194:22448
173.18.196.253:22448
208.68.36.6:22448
146.185.153.196:22448
188.166.155.131:22448
107.170.212.222:22448
159.203.12.73:22448

Quote from: alexcfr on September 24, 2016, 04:48:44 AM

thanks !

edit:
just try, got this, any idea ?

md_helper.c: In function 'void sha384_addbits_and_close(void*, unsigned int, unsigned int, void*, unsigned int)':
md_helper.c:248:5: warning: invalid conversion from 'void*' to 'sph_sha384_context*' [-fpermissive]
sc = cc;
^
g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/root/Espers/src -I/root/Espers/src/obj -DENABLE_WALLET -I/root/Espers/src/leveldb/include -I/root/Espers/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/db.d -o obj/db.o db.cpp
db.cpp:20:19: fatal error: QString: Aucun fichier ou dossier de ce type
#include
^
compilation terminated.
makefile.unix:198: recipe for target 'obj/db.o' failed

Sorry about that! :/ just had to define that currently that section corresponds to the launcher for windows until it's finished being ported later.

Anyway same drill as last time, please re-download from GitHub and you shouldn't have any more issues.

neguinho

hero member

Activity: 561

Merit: 500

Quote from: Take the red pill on September 24, 2016, 09:48:41 AM

Quote from: dellzxd on September 24, 2016, 08:24:09 AM

will esp2 at least reach 10 sat ? ...

don't worry. it can reach 1000000sat if there is a good community and guess what: ESP has a great community, just wait

SHE waiting Get one This value

Take the red pill

sr. member

Activity: 416

Merit: 250

Quote from: dellzxd on September 24, 2016, 08:24:09 AM

will esp2 at least reach 10 sat ? ...

don't worry. it can reach 1000000sat if there is a good community and guess what: ESP has a great community, just wait

EpyxZ

hero member

Activity: 994

Merit: 500

So many people having probs. Think there needs to be an old esp1 wallet & new esp2 wallet added to top of the op, too many people are sending esp1 to esp2 addy and vice versa.

dellzxd

sr. member

Activity: 555

Merit: 250

will esp2 at least reach 10 sat ? ...

Samai

hero member

Activity: 781

Merit: 1000

Quote from: tamara163 on September 24, 2016, 07:06:20 AM

Quote from: Samai on September 24, 2016, 06:33:30 AM

Quote from: tamara163 on September 24, 2016, 05:41:25 AM

0 active connections to the network since the last update of the wallet. node list does not help. Huh

?

Node list is wrong. Doesn't use it!

Code:

addnode=208.68.36.6:22448
addnode=107.170.212.222:22448

thanks but not working

I think you use different espers folders.

v1 mean /Espers, v2 mean /ESP in your roaming folder.

tamara163

legendary

Activity: 1027

Merit: 1000

Quote from: Samai on September 24, 2016, 06:33:30 AM

Quote from: tamara163 on September 24, 2016, 05:41:25 AM

0 active connections to the network since the last update of the wallet. node list does not help. Huh

?

Node list is wrong. Doesn't use it!

Code:

addnode=208.68.36.6:22448
addnode=107.170.212.222:22448

thanks but not working

Samai

hero member

Activity: 781

Merit: 1000

Quote from: tamara163 on September 24, 2016, 05:41:25 AM

0 active connections to the network since the last update of the wallet. node list does not help. Huh

?

Node list is wrong. Doesn't use it!

Code:

addnode=208.68.36.6:22448
addnode=107.170.212.222:22448

Topic: ⚡[ANN]⚡ ▐░Espers [ESP]░▌▐░PoW/PoS░▌▐░HMQ1725 Algo░▌ ▐░New Features░▌ - page 417. (Read 923924 times)