⚡[ANN]⚡ ▐░Espers [ESP]░▌▐░PoW/PoS░▌▐░HMQ1725 Algo░▌ ▐░New Features░▌ - page 425.

ctgiant

sr. member

Activity: 298

Merit: 250

Quote from: gpcito on September 18, 2016, 01:14:30 AM

I'm receiving the following message for all the ESP2. that I mined. Do anyone know why I'm not getting the mined ESP2

Generated but not accepted

Status: conflicted, broadcast through 1 node
Date: 9/17/16 20:54
Source: Generated
Debit: 0.00 ESP
Net amount: -70129464.28610662 ESP
Transaction ID: 60ba49e49080a24860f21dbf4a59920f4bc270422ffaa298d73e7200db7cd94b-000

Generated coins must mature 90 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.

That is what is known as an Orphan block. It happens all the time with POS coins. Everyone who is staking their coins will undoubtedly encounter this message in their transaction list, so know that you are not the only one.

Basically what this message means is that someone solved the block a fraction of a second before you did, so they ended up with the rewards instead of you.

m33

legendary

Activity: 1064

Merit: 1000

Never invest with borrowed coins

Quote from: Nicolasbonza on September 17, 2016, 11:18:08 PM

I've been gone lately, and i want to know how to exchange the old esp for the esp 2.0

Easy way you sell at cryptopia and go nova to buy back lol

gpcito

newbie

Activity: 11

Merit: 0

Quote from: CryptoCoderz on September 17, 2016, 03:45:06 PM

Quote from: Gandalf86 on September 17, 2016, 03:08:31 PM

Quote from: CryptoCoderz on September 17, 2016, 11:21:36 AM

Quote from: bspus on September 17, 2016, 07:28:27 AM

How about a stake report feature?
A window that shows how much a wallet stakes each day so we don't have to calculate ourselves.

The NAV wallet has it so you can check it out to see exactly what I mean

That's a great idea! We can put that into the "generate" page in where the PoS area is already predefined as well to make it easier.
We'll definitely look into making that feature.

What do you think about adding a relative weight display somewhere near the net weight, so I don't have to divide the "your weight" by the "network weight" to get my relative staking weight? The problem is not the dividing, but typing off the huge numbers from that stupid bubble notification. Grin

Also not having to pull out my calculator would help.

I already posted this on Slack but got no response for it.

Sounds good, right after we release the all-in-one full client

I'm receiving the following message for all the ESP2. that I mined. Do anyone know why I'm not getting the mined ESP2

Generated but not accepted

Status: conflicted, broadcast through 1 node
Date: 9/17/16 20:54
Source: Generated
Debit: 0.00 ESP
Net amount: -70129464.28610662 ESP
Transaction ID: 60ba49e4924860f21dbf4a50f4bc270422ffa

Generated coins must mature 90 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.

alexrey

member

Activity: 70

Merit: 10

Quote from: CjMapope on September 18, 2016, 12:23:25 AM

Quote from: ljglug on September 17, 2016, 11:53:30 PM

The market did not accept the ESP, whether it is ESP1 or ESP2, no one is interested in buying. It is sad.
Interested in the exchange is also much less. It is also sad.

o? R U selling?

im buying for LTC, as per the markets

PM if you wanna quick dump tho, up to 30LTC Cheesy

I doubt he will accept your offer even though he has some negative thoughts about Espers marketability.

CjMapope

legendary

Activity: 1820

Merit: 1092

~Full-Time Minter since 2016~

Quote from: ljglug on September 17, 2016, 11:53:30 PM

The market did not accept the ESP, whether it is ESP1 or ESP2, no one is interested in buying. It is sad.
Interested in the exchange is also much less. It is also sad.

o? R U selling?

im buying for LTC, as per the markets

PM if you wanna quick dump tho, up to 30LTC Cheesy

CryptoCoderz

hero member

Activity: 1036

Merit: 506

Coderz of the Crypto variety

Quote from: ljglug on September 17, 2016, 11:53:30 PM

The market did not accept the ESP, whether it is ESP1 or ESP2, no one is interested in buying. It is sad.
Interested in the exchange is also much less. It is also sad.

Quote from: ljglug on September 18, 2016, 12:03:55 AM

Developers' ability is limited,
From the beginning of ESP1 to ESP2, has been claimed to be integrated mining function, has been unable to achieve,
In the wallet into the function icon mining which is easy to implement,
In order to achieve automatic upgrade wallet function for a long time did not succeed, however, automatic upgrade wallet function is not important,
The ESP2 wallet appears to be very hasty, take BlackCoin's wallet to do the two development is not even modify the name to do,
POS ESP2 function is not complete, a lot of POS to the reward can not be successful, it is too sad.
This may be the market can not accept the reasons for ESP, there is no strong developer.
Developers spend too much time on some of the functions that are not important, but the main features are nothing. This is a disappointment.

We apologize you feel this way. Simply put. If you think we are doing a poor job of developing please leave and go to another project that is going to a better usage of your time.

EDIT: Removed pointless ramblings

ljglug

full member

Activity: 168

Merit: 100

Developers' ability is limited,
From the beginning of ESP1 to ESP2, has been claimed to be integrated mining function, has been unable to achieve,
In the wallet into the function icon mining which is easy to implement,
In order to achieve automatic upgrade wallet function for a long time did not succeed, however, automatic upgrade wallet function is not important,
The ESP2 wallet appears to be very hasty, take BlackCoin's wallet to do the two development is not even modify the name to do,
POS ESP2 function is not complete, a lot of POS to the reward can not be successful, it is too sad.
This may be the market can not accept the reasons for ESP, there is no strong developer.
Developers spend too much time on some of the functions that are not important, but the main features are nothing. This is a disappointment.

ljglug

full member

Activity: 168

Merit: 100

The market did not accept the ESP, whether it is ESP1 or ESP2, no one is interested in buying. It is sad.
Interested in the exchange is also much less. It is also sad.

lucky80

hero member

Activity: 1652

Merit: 593

Quote from: Nicolasbonza on September 17, 2016, 11:18:08 PM

I've been gone lately, and i want to know how to exchange the old esp for the esp 2.0

Ohh well ..read op...click on page 1...

CjMapope

legendary

Activity: 1820

Merit: 1092

~Full-Time Minter since 2016~

Quote from: Nicolasbonza on September 17, 2016, 11:18:08 PM

I've been gone lately, and i want to know how to exchange the old esp for the esp 2.0

the quick and easy way i would say is right here : https://novaexchange.com/coinswap/

then grab the new wallet from the OP and your smiling!

Nicolasbonza

member

Activity: 112

Merit: 10

I've been gone lately, and i want to know how to exchange the old esp for the esp 2.0

neguinho

hero member

Activity: 561

Merit: 500

ta not giving mine but because the currency ? Huh

m33

legendary

Activity: 1064

Merit: 1000

Never invest with borrowed coins

Quote from: Gandalf86 on September 17, 2016, 03:08:31 PM

Quote from: CryptoCoderz on September 17, 2016, 11:21:36 AM

Quote from: bspus on September 17, 2016, 07:28:27 AM

How about a stake report feature?
A window that shows how much a wallet stakes each day so we don't have to calculate ourselves.

The NAV wallet has it so you can check it out to see exactly what I mean

That's a great idea! We can put that into the "generate" page in where the PoS area is already predefined as well to make it easier.
We'll definitely look into making that feature.

What do you think about adding a relative weight display somewhere near the net weight, so I don't have to divide the "your weight" by the "network weight" to get my relative staking weight? The problem is not the dividing, but typing off the huge numbers from that stupid bubble notification. Grin

Also not having to pull out my calculator would help.

I already posted this on Slack but got no response for it.

I'm sure the guys missed it , try tag @everyone , and if what you say is the same as the nav wallet , than I think it's in the que already

m33

legendary

Activity: 1064

Merit: 1000

Never invest with borrowed coins

Quote from: xtrembash on September 17, 2016, 02:21:25 PM

i know some1 who sent by error some esp1 on esp2 wallet
is it possible to retrieve them or are they lost forever ?!

Lost if you don't know how , how many unit sis you send?

worgon12

sr. member

Activity: 429

Merit: 282

Quote from: pallas on September 17, 2016, 03:06:51 PM

Quote from: Skilogyn on September 17, 2016, 02:04:27 PM

I need help. I use AMD Radeon HD5870 windows 10 64 bits

[14:48:15] No suitable long-poll found for http://192.168.25.54:22442
[14:48:15] Building binary hmq1725Cypressgw256l4ku0.bin
[14:49:16] GPUs did not become initialized in 60 seconds...
[14:49:30] Error -11: Building Program (clBuildProgram)
[14:49:30] "C:\Users\JOO~1\AppData\Local\Temp\OCL15AD.tmp.cl", line 386: warning: goto
statement may cause irreducible control flow
if (groestl_step == 1) goto groestl_end;
^

"C:\Users\JOO~1\AppData\Local\Temp\OCL15AD.tmp.cl", line 394: warning: goto
statement may cause irreducible control flow
goto groestl_perm;
^

"C:\Users\JOO~1\AppData\Local\Temp\OCL15AD.tmp.cl", line 2014: warning: goto
statement may cause irreducible contro[14:49:30] Failed to init GPU thread 0, disabling device 0
[14:49:30] Restarting the GPU from the menu will not fix this.
[14:49:30] Re-check your configuration and try restarting.

It takes a lot of time to build the opencl kernel. Try waiting 5 minutes. I don't see any errors in your log, just a timeout.

try older amd driver, at work the radeon-crimson-15:12-win10-64bit

CryptoCoderz

hero member

Activity: 1036

Merit: 506

Coderz of the Crypto variety

Quote from: Gandalf86 on September 17, 2016, 03:08:31 PM

Quote from: CryptoCoderz on September 17, 2016, 11:21:36 AM

Quote from: bspus on September 17, 2016, 07:28:27 AM

How about a stake report feature?
A window that shows how much a wallet stakes each day so we don't have to calculate ourselves.

The NAV wallet has it so you can check it out to see exactly what I mean

That's a great idea! We can put that into the "generate" page in where the PoS area is already predefined as well to make it easier.
We'll definitely look into making that feature.

What do you think about adding a relative weight display somewhere near the net weight, so I don't have to divide the "your weight" by the "network weight" to get my relative staking weight? The problem is not the dividing, but typing off the huge numbers from that stupid bubble notification. Grin

Also not having to pull out my calculator would help.

I already posted this on Slack but got no response for it.

Sounds good, right after we release the all-in-one full client

Gandalf86

hero member

Activity: 1330

Merit: 515

Coin Mage

Quote from: CryptoCoderz on September 17, 2016, 11:21:36 AM

Quote from: bspus on September 17, 2016, 07:28:27 AM

How about a stake report feature?
A window that shows how much a wallet stakes each day so we don't have to calculate ourselves.

The NAV wallet has it so you can check it out to see exactly what I mean

That's a great idea! We can put that into the "generate" page in where the PoS area is already predefined as well to make it easier.
We'll definitely look into making that feature.

What do you think about adding a relative weight display somewhere near the net weight, so I don't have to divide the "your weight" by the "network weight" to get my relative staking weight? The problem is not the dividing, but typing off the huge numbers from that stupid bubble notification. Grin

Also not having to pull out my calculator would help.

I already posted this on Slack but got no response for it.

pallas

legendary

Activity: 2716

Merit: 1094

Black Belt Developer

Quote from: Skilogyn on September 17, 2016, 02:04:27 PM

I need help. I use AMD Radeon HD5870 windows 10 64 bits

[14:48:15] No suitable long-poll found for http://192.168.25.54:22442
[14:48:15] Building binary hmq1725Cypressgw256l4ku0.bin
[14:49:16] GPUs did not become initialized in 60 seconds...
[14:49:30] Error -11: Building Program (clBuildProgram)
[14:49:30] "C:\Users\JOO~1\AppData\Local\Temp\OCL15AD.tmp.cl", line 386: warning: goto
statement may cause irreducible control flow
if (groestl_step == 1) goto groestl_end;
^

"C:\Users\JOO~1\AppData\Local\Temp\OCL15AD.tmp.cl", line 394: warning: goto
statement may cause irreducible control flow
goto groestl_perm;
^

"C:\Users\JOO~1\AppData\Local\Temp\OCL15AD.tmp.cl", line 2014: warning: goto
statement may cause irreducible contro[14:49:30] Failed to init GPU thread 0, disabling device 0
[14:49:30] Restarting the GPU from the menu will not fix this.
[14:49:30] Re-check your configuration and try restarting.

It takes a lot of time to build the opencl kernel. Try waiting 5 minutes. I don't see any errors in your log, just a timeout.

CryptoCoderz

hero member

Activity: 1036

Merit: 506

Coderz of the Crypto variety

Quote from: xtrembash on September 17, 2016, 02:21:25 PM

i know some1 who sent by error some esp1 on esp2 wallet
is it possible to retrieve them or are they lost forever ?!

Here is a fix:

Quote from: elbandi on September 12, 2016, 05:08:51 AM

Quote from: pallas on September 12, 2016, 04:30:05 AM

I just burned a lof of ESP1 by sending them to a ESP2 address!!!!

Tried importing the privkey from the ESP2 wallet to the ESP1 wallet but it says "invalid key".

The two addresses should REALLY have been incompatible! Or if they are, so should the private keys!!!

The privkey has different prefix (old: 161, new: 144).

Try this steps:
1. open http://www.universalwalletgenerator.net/ (or save the source+offline vm, etc.)
2. Setup:
Presets currency: Custom
Public address network version: 33
Private key prefix: 161

3. At "Wallet Details" tag, enter the privkey, and store somewhere the "Private Key Hexadecimal Format" value. (64 char)
4. Go setup again, and change the private key prefix to 144.
5. Back to "Wallet Details", enter the stored hex privkey, you get the right compressed privkey.

Jerry S

hero member

Activity: 546

Merit: 500

Quote from: CryptoCoderz on September 16, 2016, 11:33:27 AM

Quote from: CryptoCoderz on September 15, 2016, 11:02:25 AM

downloaded but after the installation it won't run, might be some problem with my system too, thanks anyway

What OS do you have? We can provide you a standalone client link.

i use windows 8

Topic: ⚡[ANN]⚡ ▐░Espers [ESP]░▌▐░PoW/PoS░▌▐░HMQ1725 Algo░▌ ▐░New Features░▌ - page 425. (Read 923924 times)