[ANN] FujiCoin | Japan | Since 2014 | The Best Crypto Currency - page 54.

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

Hi motty,

I've downloaded and if I try with the previous wallets

and if i try to create a new wallet

the problem in both cases is that trezor is not recognized
(in wallet.trezor.io is working good so it's not trezor's problem)

I have tried with another trezor and same problem at creating a new wallet

I have tried with Ledger and it's working!

but...

motty

hero member

Activity: 921

Merit: 512

Member FujiCoin.org

Quote from: motty on July 11, 2017, 07:24:04 PM

Quote from: Rw13enlib88 on July 11, 2017, 05:20:30 PM

Quote from: motty on July 10, 2017, 11:25:37 PM

Hi Rw,

I fixed the coin name from "Bitcoin" to "FujiCoin".
For example, I think TREZOR is making a DB using the coin number as a key.
Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being.

Hi motty,

I have tried with my trezor but it still opens the previous one.
I'm gonna wipe out and try again, but I have to move the dust first
I've already tried but wallet.trezor.io is showing this message:
"The bitcore server doesn't seem to reply. Please select another server."

Hi Rw,

Thank you for the information
I understood the content and I will try to fix it.

Hi Rw,

I reviewed the interface code with TREZOR.
Please download again and test.

motty

hero member

Activity: 921

Merit: 512

Member FujiCoin.org

Quote from: Rw13enlib88 on July 11, 2017, 05:20:30 PM

Quote from: motty on July 10, 2017, 11:25:37 PM

Hi Rw,

I fixed the coin name from "Bitcoin" to "FujiCoin".
For example, I think TREZOR is making a DB using the coin number as a key.
Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being.

Hi motty,

I have tried with my trezor but it still opens the previous one.
I'm gonna wipe out and try again, but I have to move the dust first
I've already tried but wallet.trezor.io is showing this message:
"The bitcore server doesn't seem to reply. Please select another server."

Hi Rw,

Thank you for the information
I understood the content and I will try to fix it.

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

Quote from: motty on July 10, 2017, 11:25:37 PM

Hi Rw,

I fixed the coin name from "Bitcoin" to "FujiCoin".
For example, I think TREZOR is making a DB using the coin number as a key.
Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being.

Hi motty,

I have tried with my trezor but it still opens the previous one.
I'm gonna wipe out and try again, but I have to move the dust first
I've already tried but wallet.trezor.io is showing this message:
"The bitcore server doesn't seem to reply. Please select another server."

motty

hero member

Activity: 921

Merit: 512

Member FujiCoin.org

Quote from: Rw13enlib88 on July 10, 2017, 09:30:57 PM

Quote from: motty on July 10, 2017, 08:58:22 PM

Quote from: Rw13enlib88 on July 10, 2017, 08:48:23 PM

Quote from: motty on July 10, 2017, 05:35:19 PM

Quote from: Rw13enlib88 on July 10, 2017, 02:09:36 PM

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!

edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

Hi Rw,

Thank you for reporting.

It was good that Wallet could physically connect with TREZOR.
But it is a very dangerous test.
Basically it can not be used normally until TRZOR supports Fujicoin.
TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin.
Then, it is highly likely that the bitcoin wallet in TREZOR is broken.
I think that it is necessary to reset TRZOR.
Shocked

Hi motty,

my pleasure to help testing ElectrumFJC!

I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem.
At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin.
I understand is very risky but i needed to try

There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor

Hi Rw,

I fixed the code on the hardware wallet.
And I replaced the executable file of the download site.
Please download again.
I think that connection will be refused by TREZOR this time. (?)

I have informed to TREZOR the code to be rewritten of the firmware.
Then just wait for Fujicoin to be registered in the firmware.

Hi motty,

I've downloaded and I see the new the new messages

For ledger

And I still have the TREZOR wallet but i guess is because I already have it done

Can you also ask Ledger to include Fuji please?
Not sure where the issue/pull request should go, but this is their git
https://github.com/LedgerHQ

btw, we need more tweets like this, community asking for FJC integration in the new firmware
https://twitter.com/Exchangewatch3r/status/883821598406475777

Hi Rw,

I fixed the coin name from "Bitcoin" to "FujiCoin".
For example, I think TREZOR is making a DB using the coin number as a key.
Once you delete Fujicoin wallet of TREZOR and connect with a new wallet, it may be usable for the time being.

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

Quote from: motty on July 10, 2017, 08:58:22 PM

Quote from: Rw13enlib88 on July 10, 2017, 08:48:23 PM

Quote from: motty on July 10, 2017, 05:35:19 PM

Quote from: Rw13enlib88 on July 10, 2017, 02:09:36 PM

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!

edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

Hi Rw,

Thank you for reporting.

It was good that Wallet could physically connect with TREZOR.
But it is a very dangerous test.
Basically it can not be used normally until TRZOR supports Fujicoin.
TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin.
Then, it is highly likely that the bitcoin wallet in TREZOR is broken.
I think that it is necessary to reset TRZOR.
Shocked

Hi motty,

my pleasure to help testing ElectrumFJC!

I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem.
At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin.
I understand is very risky but i needed to try

There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor

Hi Rw,

I fixed the code on the hardware wallet.
And I replaced the executable file of the download site.
Please download again.
I think that connection will be refused by TREZOR this time. (?)

I have informed to TREZOR the code to be rewritten of the firmware.
Then just wait for Fujicoin to be registered in the firmware.

Hi motty,

I've downloaded and I see the new the new messages

For ledger

And I still have the TREZOR wallet but i guess is because I already have it done

Can you also ask Ledger to include Fuji please?
Not sure where the issue/pull request should go, but this is their git
https://github.com/LedgerHQ

btw, we need more tweets like this, community asking for FJC integration in the new firmware
https://twitter.com/Exchangewatch3r/status/883821598406475777

motty

hero member

Activity: 921

Merit: 512

Member FujiCoin.org

Quote from: Rw13enlib88 on July 10, 2017, 08:48:23 PM

Quote from: motty on July 10, 2017, 05:35:19 PM

Quote from: Rw13enlib88 on July 10, 2017, 02:09:36 PM

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!

edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

Hi Rw,

Thank you for reporting.

It was good that Wallet could physically connect with TREZOR.
But it is a very dangerous test.
Basically it can not be used normally until TRZOR supports Fujicoin.
TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin.
Then, it is highly likely that the bitcoin wallet in TREZOR is broken.
I think that it is necessary to reset TRZOR.
Shocked

Hi motty,

my pleasure to help testing ElectrumFJC!

I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem.
At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin.
I understand is very risky but i needed to try

There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor

Hi Rw,

I fixed the code on the hardware wallet.
And I replaced the executable file of the download site.
Please download again.
I think that connection will be refused by TREZOR this time. (?)

I have informed to TREZOR the code to be rewritten of the firmware.
Then just wait for Fujicoin to be registered in the firmware.

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

Quote from: motty on July 10, 2017, 05:35:19 PM

Quote from: Rw13enlib88 on July 10, 2017, 02:09:36 PM

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!

edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

Hi Rw,

Thank you for reporting.

It was good that Wallet could physically connect with TREZOR.
But it is a very dangerous test.
Basically it can not be used normally until TRZOR supports Fujicoin.
TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin.
Then, it is highly likely that the bitcoin wallet in TREZOR is broken.
I think that it is necessary to reset TRZOR.
Shocked

Hi motty,

my pleasure to help testing ElectrumFJC!

I've tested my trezor btc wallet and it's working ok. but i've tested to send the 1FJC back and same problem.
At the time of creating the wallet, it has asked me to start the bitcoin app in TREZOR, so yes, it's recognized as bitcoin.
I understand is very risky but i needed to try

There was a time when Trezor/Ledger only accepted btc and litecoin and some other coins where using this method to store the coins in trezor

tandang2

full member

Activity: 378

Merit: 100

Quote from: motty on July 10, 2017, 05:47:51 AM

Quote from: tandang2 on July 10, 2017, 05:22:11 AM

Waw is good, i wish this can for 32 bit operation system window
And do you can make electrum fjc for android ??

Thanks

I added 32bit now.
Wink

Ok thanks
Do you have electrum fjc for android?
So i can check it, everywhere ina anywhere. In my smartphone

I wish this coin will rissing up, price now is so low , just 30-50 satoshi

So, i am sorry for bad english

Thanks

motty

hero member

Activity: 921

Merit: 512

Member FujiCoin.org

Quote from: Rw13enlib88 on July 10, 2017, 02:09:36 PM

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!

edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

Hi Rw,

Thank you for reporting.

It was good that Wallet could physically connect with TREZOR.
But it is a very dangerous test.
Basically it can not be used normally until TRZOR supports Fujicoin.
TREZOR-related code has not been modified yet, so TREZOR may be recognized as bitcoin.
Then, it is highly likely that the bitcoin wallet in TREZOR is broken.
I think that it is necessary to reset TRZOR.
Shocked

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

My AV is giving security warnings with the links

I've tested it and
ledged haven't worked
but trezor yes!!! hurra!!

edit: but problems trying to move FJC back to ccex
edit2: when I disconnect the trezor, the logo of trezor with the green point is still there

LEDGER

TREZOR

motty

hero member

Activity: 921

Merit: 512

Member FujiCoin.org

Quote from: MoonWhale on July 10, 2017, 05:19:51 AM

I would be able to host a Fujicoin-electrum server if you like. I saw that the source code is available on GitHub for the server. I wonder if it would be possible to run this on a raspberry pi.. Huh

Hi MoonWhale,

The electrum-FJC's server needs absolute trust.
So, it is difficult for you to operate the server.

motty

hero member

Activity: 921

Merit: 512

Member FujiCoin.org

Quote from: tandang2 on July 10, 2017, 05:22:11 AM

Waw is good, i wish this can for 32 bit operation system window
And do you can make electrum fjc for android ??

Thanks

I added 32bit now.
Wink

tandang2

full member

Activity: 378

Merit: 100

Quote from: motty on July 10, 2017, 03:57:31 AM

Beta test of Electrum-FJC

We will begin the beta test of Electrum-FJC.
This time is Windows .exe version.
This is for 64 bit operating system, be careful.
If you participate in the test please follow the procedure below.

· Download from the following URL.
http://www.fujicoin.org/fujicoin/2.0/electrum-FJC-2.8.3.zip
· Please unzip this to your favorite place.
· Please make shortcut if necessary.
· Please post problems etc. after the test.

Thank you.

Waw is good, i wish this can for 32 bit operation system window
And do you can make electrum fjc for android ??

Thanks

MoonWhale

member

Activity: 218

Merit: 10

I would be able to host a Fujicoin-electrum server if you like. I saw that the source code is available on GitHub for the server. I wonder if it would be possible to run this on a raspberry pi.. Huh

motty

hero member

Activity: 921

Merit: 512

Member FujiCoin.org

Beta test of Electrum-FJC
Do not connect hardware wallet!

We will begin the beta test of Electrum-FJC.
This time is Windows .exe version.
If you participate in the test please follow the procedure below.

· Download from the following URL.
64bit:
http://www.fujicoin.org/fujicoin/2.0/electrum-FJC-2.8.3.zip

32bit:
http://www.fujicoin.org/fujicoin/2.0/electrum-FJC-2.8.3-x86.zip

· Please unzip this to your favorite place.
· Please make shortcut if necessary.
· Please post problems etc. after the test.

Thank you.

motty

hero member

Activity: 921

Merit: 512

Member FujiCoin.org

Quote from: Rw13enlib88 on July 08, 2017, 06:16:19 PM

motty,

do you think after electrumFJC release we can go for more exchanges?

Bittrex, Zaif, Livecoin...

Hi Rw,

I think that is another problem.
Lightweight wallets are pleasing to the general user.
So, I think Fujicoin 's popularity will increase.
Ultimately the major exchanges will have to deal with Fujicoin as well.

motty

hero member

Activity: 921

Merit: 512

Member FujiCoin.org

Quote from: Rw13enlib88 on July 08, 2017, 05:22:43 PM

Hi motty,

Thanks for the instructions!

Unfortunatly I haven't achieved to follow the process on windows.
I don't know how to make the step3.

I've done it in linux because I'm already testing another Electrum wallet so I only had to follow step 4 and 5 and ./electrum to start it.
Looks fine!! Great job!!!
I'm trying to test the hardwallet part but I'm stuck at udev thing.
Gonna keep trying and I'll let you know more

Hi Rw,

How to Open Command Prompt:
https://www.lifewire.com/how-to-open-command-prompt-2618089

Then input:
pip install win_inet_pton
pip install -U setuptools

That's all.

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

motty,

do you think after electrumFJC release we can go for more exchanges?

Bittrex, Zaif, Livecoin...

Rw13enlib88

legendary

Activity: 2142

Merit: 1025

Quote from: motty on July 05, 2017, 01:09:23 PM

Quote from: Rw13enlib88 on July 05, 2017, 07:03:56 AM

Quote from: motty on July 04, 2017, 05:55:02 PM

Electrum Light for FujiCoin gave birth.
Currently we are starting a developer's test.

wow!! great job!!

Can I test it?

Hi Rw13enlib88,

Can you do difficult processing with windows?
Currently the installer is not prepared.

If you still want to test it, you can join the test with the following procedure.

1. Install Python 2.7.13
   At this time, instruct the environment variable to be set
   The default installation location is C:\Python27
   Https://www.python.org/downloads/

2. Install PyQt 4
   Https://sourceforge.net/projects/pyqt/files/PyQt4/PyQt-4.10/
   Select PyQt4-4.10-gpl-Py2.7-Qt4.8.4-x32.exe
   Environment variables are set automatically
   → C:\Python27\Lib\site-packages\PyQt4;C:\Python27\;C:\Python27\Scripts

3. Launch CommandPrompt and do the following
   pip install win_inet_pton
   pip install -U setuptools

4. Download fujicoin/electrum
   Https://github.com/fujicoin/electrum
   unzip it under C:\Pytjon27

5. Execute the following with CommandPrompt
   cd C:\Pytjon27/electrum-master
   pyrcc4 icons.qrc -o gui/qt/icons_rc.py
   python setup.py install

6. Start electrum with CommandPrompt
   python C:\Python27\Scripts\electrum -v

I do not know whether TREZOR works or not.
Please find as many bugs as possible.

Hi motty,

Thanks for the instructions!

Unfortunatly I haven't achieved to follow the process on windows.
I don't know how to make the step3.

I've done it in linux because I'm already testing another Electrum wallet so I only had to follow step 4 and 5 and ./electrum to start it.
Looks fine!! Great job!!!
I'm trying to test the hardwallet part but I'm stuck at udev thing.
Gonna keep trying and I'll let you know more

Quote from: motty on July 06, 2017, 06:25:17 PM

Hi Rw,
Firmware update is required to connect to TREZOR.
I asked TREZOR to add support for Fujicoin.
https://github.com/trezor/trezor-mcu/issues/188

This is amazing!!
If we can get FJC included in the next firmware update is gonna be awesome!!!

This is another coin trying to get included too, they are making a pull request. just as more info

https://github.com/trezor/trezor-mcu/pull/175/commits/1f0431c817dd1974158e5826954e11d491c30abc
https://user-images.githubusercontent.com/16408160/27895280-9dcfa8d4-624c-11e7-909c-a8ea4627befc.jpg
https://github.com/trezor/trezor-mcu/issues/174

Topic: [ANN] FujiCoin | Japan | Since 2014 | The Best Crypto Currency - page 54. (Read 153365 times)