does anyone in the usa have one of these to sell? I don't mean any disrespect to the threads op.
I just wanted one to play around with. I thought someone near my state of NJ might want to offload one.
Topic: [ANN] HEX•FURY 11+Gh/s USB Stick Miner [ IN STOCK UK, EU ] Shipping Worldwide - page 2. (Read 36182 times)
May 06, 2014, 06:01:31 PM
May 06, 2014, 03:42:33 PM
Nice sticks, anyone achieved 15 gh/s ? How much Wattage are they using ?
Hex is using around 10W. So far I've managed to push it to over 16gh and 15.7Gh avg. See below
May 05, 2014, 08:23:26 AM
Nice sticks, anyone achieved 15 gh/s ? How much Wattage are they using ?
May 04, 2014, 02:30:19 AM
I just posted a new version of cgminer, 4.3.3, which has a fix for a huge memory leak which has always been there with the driver for this particular hardware. All users mining with this hardware on cgminer are urged to upgrade.
May 01, 2014, 04:37:07 AM
Trying to purchase, but no payment methods show up during checkout?
Are you trying to pay by card?
Edit: To clarify, this is a shopping cart failure on the razorfishsolutions.com.hk site, not the asicrunner.com site.
Yep, i get the same problem. If you want the 19 port hub then you can buy it here on bitcointalk thread:
https://bitcointalksearch.org/topic/sold-out-dipo-electronic-19-port-usb-hubs-418087
or
www.eyeboot.com
It is cheaper and it works
In stock with immediate shipping!
I would appreciate if you keep your adverts on your forums. This is Hex*fury thread! Thank you.
April 30, 2014, 11:49:31 PM
Trying to purchase, but no payment methods show up during checkout?
The payment was disabled whilst I ensured that no one was exposed due to the "HeartBLEED" bug.
Website should be fine to use now.
But if you contact me directly I'm offering 'free gifts' (That does not mean a 'shitty key chain')
You can contact me here for hubs.
https://bitcointalksearch.org/topic/m.6105890
Also for people not 'comfortable' about modding the hubs I can supply an adaptor.
and of course great work/hats off to 'LordTheron'
RF
April 30, 2014, 11:22:59 PM
Trying to purchase, but no payment methods show up during checkout?
Are you trying to pay by card?
Edit: To clarify, this is a shopping cart failure on the razorfishsolutions.com.hk site, not the asicrunner.com site.
Yep, i get the same problem. If you want the 19 port hub then you can buy it here on bitcointalk thread:
https://bitcointalksearch.org/topic/sold-out-dipo-electronic-19-port-usb-hubs-418087
or
www.eyeboot.com
It is cheaper and it works
In stock with immediate shipping!
April 30, 2014, 02:07:51 PM
Trying to purchase, but no payment methods show up during checkout?
Are you trying to pay by card?
Edit: To clarify, this is a shopping cart failure on the razorfishsolutions.com.hk site, not the asicrunner.com site.
April 30, 2014, 01:57:14 PM
Trying to purchase, but no payment methods show up during checkout?
Are you trying to pay by card?
April 30, 2014, 09:34:30 AM
Trying to purchase, but no payment methods show up during checkout?
April 28, 2014, 08:19:53 AM
This company's rating has changed in the Manufacturer Trustworthiness Guide.
April 25, 2014, 12:06:58 PM
I am interested in the details of your mod?
Just remove P110 fuse, and bridge the pads with a bit of wire. That's all
Also make sure you don't connect more than 8 Hex miners to RF hub after the mod as there will be no limits what each port can draw from psu and you don't want to overload it and brake it.Edit:
I've noticed that if you remove fuses, you can adjust the voltage on RF hub and it will overclock your Hex
I found 5.25V works really well and its not frying the hub. With fuses the hub will perform worst if you adjust the voltage but without fuses does the job well Over 18hrs, 6 sticks @ 5.25V 78.5Gh avg, not to bad
Ps. All modification are done at your own risk. Please make sure you know what you are doing as I'm not responsible for any damages that might cause if something go wrong.
Have fun
April 25, 2014, 12:13:19 AM
I am interested in the details of your mod?
April 21, 2014, 07:27:53 PM
Hey guys,
I've been playing around with razorfish hubs for a while and finally got around to modify it to remove 1.5A limit per port. I've modded 6 ports for testing and results are awesome. Before the mod, Hex would happily hash around 11.5Gh max, but with the mod same units are 12.5-13.3GH and thats without OC. 76.9GH avg out of 6 devices
I've been playing around with razorfish hubs for a while and finally got around to modify it to remove 1.5A limit per port. I've modded 6 ports for testing and results are awesome. Before the mod, Hex would happily hash around 11.5Gh max, but with the mod same units are 12.5-13.3GH and thats without OC. 76.9GH avg out of 6 devices
April 20, 2014, 03:16:31 PM
Sorry if I missed the answer. Will hexfury start on regular 500mA USB2 port? If yes what is the hashrate?
Edit: gridseed chip in dualminers consumes only 1.5W. It seems there is other reasons than power budget to not add up another chip or even few.
Edit: gridseed chip in dualminers consumes only 1.5W. It seems there is other reasons than power budget to not add up another chip or even few.
You should (but not guaranteed) get Hex running on 500mA port however I can't say how well and how stable its going to run. 500mA is way to low and shouldn't be used to power Hex. The design of Hex requires sufficient power to be delivered otherwise your device will not perform as or above advertised speed. Just to give you quick idea see below.
- 2A+ hub will give you 12.5GH-13.5gh no OC
- 1.5A hub will give you 10.5-11.5GH
- 1A hub will give you 6-8GH
- 0.5A -Don't even bother as may get strange problems.
With OC, Hex will use around 2.4A @ 5.6V and will give you 14.5-15.9GH.
Edit: Just to add one thing, is is very bad for your Hex to be run on 500mA port. If all chips will get initialized, its fine, but if one or 2 chips will not get initialized properly(which is very likely on such a low power), the other chips will get overclocked automatically and will get very hot and even unstable.
April 19, 2014, 03:56:25 PM
Sorry if I missed the answer. Will hexfury start on regular 500mA USB2 port? If yes what is the hashrate?
if it does it will be very very underpowered. so expect like 3-4 ghash April 19, 2014, 11:59:50 AM
Sorry if I missed the answer. Will hexfury start on regular 500mA USB2 port? If yes what is the hashrate?
Edit: gridseed chip in dualminers consumes only 1.5W. It seems there is other reasons than power budget to not add up another chip or even few.
Edit: gridseed chip in dualminers consumes only 1.5W. It seems there is other reasons than power budget to not add up another chip or even few.
April 19, 2014, 11:43:14 AM
New cgminer is out and it fixes all issues with Hex*Fury and improve speed. Works really well.
Cheers ck!
https://bitcointalk.org/index.php?topic=28402.14960
Cheers ck!
https://bitcointalk.org/index.php?topic=28402.14960
April 17, 2014, 12:08:44 PM
Hi Guys,
I have Easter Sale Promotion in my store. Prices reduced till Monday midnight GMT. I have even better pries for larger volume orders so please PM me the quantity you are after and I'll send you the quote. I will include free express shipping with orders larger than 20 units.
www.asicrunner.com
Hex*Fury - £140
Yellowjacket - £25
Gridssed - £125
I have Easter Sale Promotion in my store. Prices reduced till Monday midnight GMT. I have even better pries for larger volume orders so please PM me the quantity you are after and I'll send you the quote. I will include free express shipping with orders larger than 20 units.
www.asicrunner.com
Hex*Fury - £140
Yellowjacket - £25
Gridssed - £125
April 16, 2014, 08:49:25 PM
Yes for now it uses the BFGMiner BiFury driver.
Soon it will have a better version and handling I have been told.
Soon it will have a better version and handling I have been told.
Hi, any hints on how to get this to work with BFGMiner?
I am also running NanoFury II's, and these are not fully supported by CGMiner, half speed, so I need to use BFGMiner.
But BFGMiner does not like Zadig/WinUSB drivers.
And my Windows boxes do not auto install drivers for the hex fury (tested in W2K12R2 and W8.1).
What standard/BFGMiner driver do I use with hex fury, where do I get it?
P.
I am also running NanoFury II's, and these are not fully supported by CGMiner, half speed, so I need to use BFGMiner.
But BFGMiner does not like Zadig/WinUSB drivers.
And my Windows boxes do not auto install drivers for the hex fury (tested in W2K12R2 and W8.1).
What standard/BFGMiner driver do I use with hex fury, where do I get it?
P.
As the bifury driver is not signed, problem for x64 systems, I created my own self-signed driver for use with BFGMiner, get a copy of mine or sign your own here:
http://blog.insanegenius.com/2014/04/16/self-signed-bitfury-drivers/
P.
Jump to: