Miner from Wolf crashes under Windows SERVER 2008 on 2*E5-XEON 2620 v2,
but works perfectly under Windows SERVER 2012 on 2*E5-XEON 2620 v3.
It makes about 490 H/s on second system, working in two processes for two different pools.
If start for one pool only, make about 420 H/s.
Topic: [ANN] Ħ [HODL] 5% Interest. No Staking Req. Term Deposits 10%. Solo Mining. - page 200. (Read 472948 times)
April 05, 2016, 11:22:13 PM
April 05, 2016, 10:25:55 PM
Can you guys please post your CPUs and relative mining hashrates, I'm making a doc.
Read the last few pages, most of the hashrates were listed there.
April 05, 2016, 10:18:48 PM
I've got 2 CPUs mining HOdl, a i7-6700K running Linux and cpuminer-opt, and a i7-4790K running win8
and hodlminer-wolf. Both clocked at 4 GHz and mining 8 threads. They both produce around the same
hashrate as reported at the pool, around 200 H/s. It fluctuates a lot so it's hard to be precise.
If I can get similar rates as Wolf0, without his optimisations I should be able to do better. That will have to wait
until tomorrow.
and hodlminer-wolf. Both clocked at 4 GHz and mining 8 threads. They both produce around the same
hashrate as reported at the pool, around 200 H/s. It fluctuates a lot so it's hard to be precise.
If I can get similar rates as Wolf0, without his optimisations I should be able to do better. That will have to wait
until tomorrow.
April 05, 2016, 10:09:44 PM
Far faster HODL miner: https://github.com/wolf9466/hodlminer-wolf
BTC donation link is in my sig; HODL address is: H9k1vcAK9qvSBXWazr36unSMy4Lb6k8Cm6
BTC donation link is in my sig; HODL address is: H9k1vcAK9qvSBXWazr36unSMy4Lb6k8Cm6
solo mode is ok ? What about release binaries?
Try compile in windows failed.
Work flawlessly in ubuntu 14.04 64bit though. If there any binary for windows would be great
Thanks Wolf0..
Crypto Mining Blog has both the Wolf0 and original hodlminer versions compiled for windows.
April 05, 2016, 09:54:16 PM
Far faster HODL miner: https://github.com/wolf9466/hodlminer-wolf
BTC donation link is in my sig; HODL address is: H9k1vcAK9qvSBXWazr36unSMy4Lb6k8Cm6
BTC donation link is in my sig; HODL address is: H9k1vcAK9qvSBXWazr36unSMy4Lb6k8Cm6
solo mode is ok ? What about release binaries?
Try compile in windows failed.
Work flawlessly in ubuntu 14.04 64bit though. If there any binary for windows would be great
Thanks Wolf0..
April 05, 2016, 08:26:10 PM
Am I arriving late to this party?
cpuminer-opt with HOdl support now in beta.
I'm getting around 400 H/s on i7-6700K @ 4 GHz. How does it compare?
Edi: pool reports about 60% of the hashrate cpuminer-opt reports. This puts my performance in line
with hodlminer.
Currrent beta version of cpuminer-opt also works on non-AES_NI CPUs.
cpuminer-opt with HOdl support now in beta.
I'm getting around 400 H/s on i7-6700K @ 4 GHz. How does it compare?
Edi: pool reports about 60% of the hashrate cpuminer-opt reports. This puts my performance in line
with hodlminer.
Currrent beta version of cpuminer-opt also works on non-AES_NI CPUs.
Great can't wait to see what you can come up with..
Wolf0 has me beat. I don't know if I can do any better, probably very little if anything. I'll have to look into
the local hashrate issue, it's not a problem with other algos.
Since I used the original hodleminer and Wolf0 has added AES_NI optimisations I guess I'll put the two
together and support both CPU architectures in one miner, along with all the other algos that cpuminer-opt
supports.
Full credit to wolf0 for his AES_NI stuff!
April 05, 2016, 07:33:07 PM
Am I arriving late to this party?
cpuminer-opt with HOdl support now in beta.
I'm getting around 400 H/s on i7-6700K @ 4 GHz. How does it compare?
Edi: pool reports about 60% of the hashrate cpuminer-opt reports. This puts my performance in line
with hodlminer.
Currrent beta version of cpuminer-opt also works on non-AES_NI CPUs.
cpuminer-opt with HOdl support now in beta.
I'm getting around 400 H/s on i7-6700K @ 4 GHz. How does it compare?
Edi: pool reports about 60% of the hashrate cpuminer-opt reports. This puts my performance in line
with hodlminer.
Currrent beta version of cpuminer-opt also works on non-AES_NI CPUs.
Great can't wait to see what you can come up with..
April 05, 2016, 05:50:30 PM
Am I arriving late to this party?
cpuminer-opt with HOdl support now in beta.
I'm getting around 400 H/s on i7-6700K @ 4 GHz. How does it compare?
Edi: pool reports about 60% of the hashrate cpuminer-opt reports. This puts my performance in line
with hodlminer.
Currrent beta version of cpuminer-opt also works on non-AES_NI CPUs.
cpuminer-opt with HOdl support now in beta.
I'm getting around 400 H/s on i7-6700K @ 4 GHz. How does it compare?
Edi: pool reports about 60% of the hashrate cpuminer-opt reports. This puts my performance in line
with hodlminer.
Currrent beta version of cpuminer-opt also works on non-AES_NI CPUs.
April 05, 2016, 04:38:51 PM
did you configure rpcallowip to your external ip ?
Did you mean the ip behind the router like 44.23.165.xxx?
well if your pc had direct access to internet yes, otherwise its port forwarding you need to setup.
hmm, i wonder if you need listen=1 in the conf
Other wallets working fine without listen=1 with many incoming connections through the open port.
April 05, 2016, 04:37:21 PM
Far faster HODL miner: https://github.com/wolf9466/hodlminer-wolf
BTC donation link is in my sig; HODL address is: H9k1vcAK9qvSBXWazr36unSMy4Lb6k8Cm6
BTC donation link is in my sig; HODL address is: H9k1vcAK9qvSBXWazr36unSMy4Lb6k8Cm6
I see about 20% speed improvement, great work Wolf , thank you.
Tested on ubuntu 14.04 LTS ( 64bit )
April 05, 2016, 04:30:52 PM
did you configure rpcallowip to your external ip ?
Did you mean the ip behind the router like 44.23.165.xxx?
well if your pc had direct access to internet yes, otherwise its port forwarding you need to setup.
hmm, i wonder if you need listen=1 in the conf
April 05, 2016, 04:15:55 PM
I tried to compile and then I got this:
In file included from /usr/lib/gcc/x86_64-linux-gnu/4.9/include/x86intrin.h:43:0,
from aes.c:2:
aes.c: In function ‘ExpandAESKey256_sub2’:
/usr/lib/gcc/x86_64-linux-gnu/4.9/include/wmmintrin.h:87:1: error: inlining failed in call to always_inline ‘_mm_aeskeygenassist_si128’: target specific option mismatch
_mm_aeskeygenassist_si128 (__m128i __X, const int __C)
^
aes.c:21:7: error: called from here
tmp4 = _mm_aeskeygenassist_si128(*tmp1, 0x00);
^
Makefile:569: recipe for target 'hodlminer-aes.o' failed
make[2]: *** [hodlminer-aes.o] Error 1
I'm using Ubuntu 15.04 64bits
In file included from /usr/lib/gcc/x86_64-linux-gnu/4.9/include/x86intrin.h:43:0,
from aes.c:2:
aes.c: In function ‘ExpandAESKey256_sub2’:
/usr/lib/gcc/x86_64-linux-gnu/4.9/include/wmmintrin.h:87:1: error: inlining failed in call to always_inline ‘_mm_aeskeygenassist_si128’: target specific option mismatch
_mm_aeskeygenassist_si128 (__m128i __X, const int __C)
^
aes.c:21:7: error: called from here
tmp4 = _mm_aeskeygenassist_si128(*tmp1, 0x00);
^
Makefile:569: recipe for target 'hodlminer-aes.o' failed
make[2]: *** [hodlminer-aes.o] Error 1
I'm using Ubuntu 15.04 64bits
April 05, 2016, 04:12:04 PM
Far faster HODL miner: https://github.com/wolf9466/hodlminer-wolf
BTC donation link is in my sig; HODL address is: H9k1vcAK9qvSBXWazr36unSMy4Lb6k8Cm6
BTC donation link is in my sig; HODL address is: H9k1vcAK9qvSBXWazr36unSMy4Lb6k8Cm6
solo mode is ok ? What about release binaries?
April 05, 2016, 04:09:58 PM
Far faster HODL miner: https://github.com/wolf9466/hodlminer-wolf
BTC donation link is in my sig; HODL address is: H9k1vcAK9qvSBXWazr36unSMy4Lb6k8Cm6
BTC donation link is in my sig; HODL address is: H9k1vcAK9qvSBXWazr36unSMy4Lb6k8Cm6
Thanx again!! The bump in hash is great!! 3k HOdl sent your way..
April 05, 2016, 03:53:11 PM
did you configure rpcallowip to your external ip ?
Did you mean the ip behind the router like 44.23.165.xxx?
April 05, 2016, 03:32:40 PM
Trying to open the port 1989 in firewall for incoming connections from internet and it fails. All others wallets with their "own specific" ports successfully opened. Was check it via http://www.whatsmyip.org/port-scanner/
Is this a bug of client ?
Is this a bug of client ?
did you configure rpcallowip to your external ip ? , the default is 127.0.0.1 ( for any wallet ).
an i believe its 11989 you need to open up since hodlminer would then use -o http://yourip:11989
I used different RPC port, but port like in the first page (Port: 1989) is default. rpcallowip is 127.0.0.1 and for a few local PC's. It's working on every wallet (bitcoin, primecoin, geth), but not here. So i don't understand what is wrong. I believe it's a some sort of a bug.
that's my .conf
Code:
rpcuser=xxxx
rpcpassword=xxxx
rpcport=83xx
rpcallowip=127.0.0.1
rpcallowip=192.168.x.x
rpcallowip=192.168.x.x
rpcallowip=192.168.x.x
rpcallowip=192.168.x.x
rpcallowip=192.168.x.x
gen=0
server=1
rpcthreads=60
maxconnection=70
Most of strange when i have open RPC port in firewall, it's visible from internet via port scanner, but not 1989. Like i said it's rather a bug of client, cause it's not listen, like client is off.
April 05, 2016, 03:17:29 PM
Trying to open the port 1989 in firewall for incoming connections from internet and it fails. All others wallets with their "own specific" ports successfully opened. Was check it via http://www.whatsmyip.org/port-scanner/
Is this a bug of client ?
Is this a bug of client ?
did you configure rpcallowip to your external ip ? , the default is 127.0.0.1 ( for any wallet ).
an i believe its 11989 you need to open up since hodlminer would then use -o http://yourip:11989
April 05, 2016, 01:10:41 PM
Trying to open the port 1989 in firewall for incoming connections from internet and it fails. All others wallets with their "own specific" ports successfully opened. Was check it via http://www.whatsmyip.org/port-scanner/
Is this a bug of client ?
Is this a bug of client ?
April 05, 2016, 12:04:14 PM
Mac Pro 2008 OS X 10.11.3 2x4-core Xeon X5482 @ 3.20GHz, 8 threads — "hashespersec" : 75 — 1 block in 6 hours so far
CentOS 7.2 ASRock Extreme6 Intel 4-core i5-4690K CPU @ 3.50GHz, 4 threads — "hashespersec" : 80 — 2 blocks in 9 hours so far
CentOS 7.2 ASRock Extreme6 Intel 4-core i5-4690K CPU @ 3.50GHz, 4 threads — "hashespersec" : 80 — 2 blocks in 9 hours so far
Damn that is some pretty decent luck for solo mining with the current NetHashrate.
Based on some posts, it seems solo HODLmining is set up to give beginner miners a block or two right off the bat, then leave their nutz to dry with nothing for a couple days or more?...
April 05, 2016, 11:51:06 AM
nothing mined yet. Why? Solo mining probably not working now
Just high diff
Jump to: