thanks a lot it works
How long until .......
Hahahahahahahaha
Topic: [ANN] Independant Miners Alliance Official Launch Notification (IMACredit coin) - page 8. (Read 22139 times)
September 05, 2014, 07:02:41 AM
How long until .......
Hahahahahahahaha
September 05, 2014, 06:28:12 AM
Watching this one, I like the idea of making it wallet only and tough to mine. May add this one soon.
Good choice! :-)
The dev team have already shown they are committed to providing long-term support for their coins and it's a refreshing change to see a coin like this. Reminds me of mining BTC on a CPU back in "the day".
September 04, 2014, 11:21:17 PM
Watching this one, I like the idea of making it wallet only and tough to mine. May add this one soon.
September 04, 2014, 10:05:49 AM
RE: Not connecting.
Very odd, we have 3 seed nodes that have never failed any of the development team, one of which was in that list.
The good news is that we have over 120 connections this morning on one of those seeds and the network hashrate is up about 15X over where it was 10 hours ago. We are still running at minimum difficulty, but I'm seeing blocks tick by fairly quickly now, so we should be getting close to minimum mass.
Keep up the good work!
Cassey
ps. I have a remote node I'll add next time I visit the site as another seed - that should help diversify the network.
Update: Think we found it. Our seednodes were using the default maxconnections of 125 and apparently maxed out. They have been changed to accept up to 1024 connections now.
Very odd, we have 3 seed nodes that have never failed any of the development team, one of which was in that list.
The good news is that we have over 120 connections this morning on one of those seeds and the network hashrate is up about 15X over where it was 10 hours ago. We are still running at minimum difficulty, but I'm seeing blocks tick by fairly quickly now, so we should be getting close to minimum mass.
Keep up the good work!
Cassey
ps. I have a remote node I'll add next time I visit the site as another seed - that should help diversify the network.
Update: Think we found it. Our seednodes were using the default maxconnections of 125 and apparently maxed out. They have been changed to accept up to 1024 connections now.
September 04, 2014, 10:05:34 AM
thanks a lot it works
How long until .......
Hahahahahahahaha
September 04, 2014, 09:01:44 AM
thanks a lot it works
September 04, 2014, 08:52:37 AM
Here, hope this helps anyone who had issues 
09:51:54

getpeerinfo
09:51:54

[
{
"addr" : "66.128.118.35:64097",
"services" : "00000003",
"lastsend" : 1409838162,
"lastrecv" : 1409838606,
"bytessent" : 8199,
"bytesrecv" : 18914,
"blocksrequested" : 3,
"conntime" : 1409811682,
"version" : 80001,
"subver" : "/Satoshi:0.9.1.1/",
"inbound" : false,
"startingheight" : 75,
"banscore" : 0,
"syncnode" : true
},
{
"addr" : "59.42.254.113:64097",
"services" : "00000003",
"lastsend" : 1409838606,
"lastrecv" : 1409838624,
"bytessent" : 22019,
"bytesrecv" : 14352,
"blocksrequested" : 3,
"conntime" : 1409813755,
"version" : 80001,
"subver" : "/Satoshi:0.9.1/",
"inbound" : false,
"startingheight" : 76,
"banscore" : 0
},
{
"addr" : "176.58.92.169:64097",
"services" : "00000003",
"lastsend" : 1409838155,
"lastrecv" : 1409838606,
"bytessent" : 9435,
"bytesrecv" : 10567,
"blocksrequested" : 2,
"conntime" : 1409825232,
"version" : 80001,
"subver" : "/Satoshi:0.9.1/",
"inbound" : false,
"startingheight" : 98,
"banscore" : 0
}
]
09:51:54

getpeerinfo
09:51:54

[
{
"addr" : "66.128.118.35:64097",
"services" : "00000003",
"lastsend" : 1409838162,
"lastrecv" : 1409838606,
"bytessent" : 8199,
"bytesrecv" : 18914,
"blocksrequested" : 3,
"conntime" : 1409811682,
"version" : 80001,
"subver" : "/Satoshi:0.9.1.1/",
"inbound" : false,
"startingheight" : 75,
"banscore" : 0,
"syncnode" : true
},
{
"addr" : "59.42.254.113:64097",
"services" : "00000003",
"lastsend" : 1409838606,
"lastrecv" : 1409838624,
"bytessent" : 22019,
"bytesrecv" : 14352,
"blocksrequested" : 3,
"conntime" : 1409813755,
"version" : 80001,
"subver" : "/Satoshi:0.9.1/",
"inbound" : false,
"startingheight" : 76,
"banscore" : 0
},
{
"addr" : "176.58.92.169:64097",
"services" : "00000003",
"lastsend" : 1409838155,
"lastrecv" : 1409838606,
"bytessent" : 9435,
"bytesrecv" : 10567,
"blocksrequested" : 2,
"conntime" : 1409825232,
"version" : 80001,
"subver" : "/Satoshi:0.9.1/",
"inbound" : false,
"startingheight" : 98,
"banscore" : 0
}
]
September 04, 2014, 08:41:17 AM
working fine,

{
"blocks" : 162,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00024414,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"hashespersec" : 41,
"networkhashps" : 1305,
"pooledtx" : 0,
"testnet" : false
}
Neat idea too, hope this works out in some fashion.
With how hard this is to mine value could/should be quite high.
can you post a few nodes
{
"blocks" : 162,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00024414,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"hashespersec" : 41,
"networkhashps" : 1305,
"pooledtx" : 0,
"testnet" : false
}
Neat idea too, hope this works out in some fashion.
With how hard this is to mine value could/should be quite high.
thanks
Sure I am just not familiar with the command that shows nodes, is it something I can do from the debug menu? Just let me know the commands I'll post the peer info here for everyone.
thanks
September 04, 2014, 08:40:13 AM
working fine,

{
"blocks" : 162,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00024414,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"hashespersec" : 41,
"networkhashps" : 1305,
"pooledtx" : 0,
"testnet" : false
}
Neat idea too, hope this works out in some fashion.
With how hard this is to mine value could/should be quite high.
can you post a few nodes
{
"blocks" : 162,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00024414,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"hashespersec" : 41,
"networkhashps" : 1305,
"pooledtx" : 0,
"testnet" : false
}
Neat idea too, hope this works out in some fashion.
With how hard this is to mine value could/should be quite high.
thanks
Sure I am just not familiar with the command that shows nodes, is it something I can do from the debug menu? Just let me know the commands I'll post the peer info here for everyone.
September 04, 2014, 08:29:04 AM
working fine,

{
"blocks" : 162,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00024414,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"hashespersec" : 41,
"networkhashps" : 1305,
"pooledtx" : 0,
"testnet" : false
}
Neat idea too, hope this works out in some fashion.
With how hard this is to mine value could/should be quite high.
can you post a few nodes
{
"blocks" : 162,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00024414,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"hashespersec" : 41,
"networkhashps" : 1305,
"pooledtx" : 0,
"testnet" : false
}
Neat idea too, hope this works out in some fashion.
With how hard this is to mine value could/should be quite high.
thanks
September 04, 2014, 08:15:54 AM
working fine,

{
"blocks" : 162,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00024414,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"hashespersec" : 41,
"networkhashps" : 1305,
"pooledtx" : 0,
"testnet" : false
}
Neat idea too, hope this works out in some fashion.
With how hard this is to mine value could/should be quite high.

{
"blocks" : 162,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00024414,
"errors" : "",
"generate" : true,
"genproclimit" : -1,
"hashespersec" : 41,
"networkhashps" : 1305,
"pooledtx" : 0,
"testnet" : false
}
Neat idea too, hope this works out in some fashion.
With how hard this is to mine value could/should be quite high.
September 04, 2014, 06:44:21 AM
it is always funny when a coin announce that there is no need for addnode and you can't even connect to it...
What could be the reason ? Can this be related to the shitty hashrate ?
What could be the reason ? Can this be related to the shitty hashrate ?
September 04, 2014, 05:22:35 AM
Same here, wallet won't connect to network
September 04, 2014, 04:58:53 AM
does not seem to connect to anything...
can someone post a few nodes
thanks
can someone post a few nodes
thanks
September 04, 2014, 12:05:54 AM
On the zero hashes per second issue after doing a setgenerate:
Please wait at least 8 seconds before querying the hashrate.
I'm playing around with different timings now to see if perhaps a bit more patience (like a 30 second delay) will generate more consistent numbers.
Cassey
Update: Ok, bumping the timing cycle from 4 seconds to 30 seconds absolutely leveled this out. On my 6-core development VM, with a 5 second cycle, I was seeing the reported hashrate bounce between 0, 20s, 40s, 70s, 120s, then return to 0 and start the cycle again. With a 30 second measurement cycle time, its holding steady between 72-78 hashes/sec, typically around 75. Some variation is, of course, expected.
The next release will have this change. I'll likely push a new wallet out tomorrow morning.
I've also changed the debug.log message to report hash/sec instead of khash/sec.
Cassey
Please wait at least 8 seconds before querying the hashrate.
I'm playing around with different timings now to see if perhaps a bit more patience (like a 30 second delay) will generate more consistent numbers.
Cassey
Update: Ok, bumping the timing cycle from 4 seconds to 30 seconds absolutely leveled this out. On my 6-core development VM, with a 5 second cycle, I was seeing the reported hashrate bounce between 0, 20s, 40s, 70s, 120s, then return to 0 and start the cycle again. With a 30 second measurement cycle time, its holding steady between 72-78 hashes/sec, typically around 75. Some variation is, of course, expected.
The next release will have this change. I'll likely push a new wallet out tomorrow morning.
I've also changed the debug.log message to report hash/sec instead of khash/sec.
Cassey
September 03, 2014, 11:19:45 PM
look like mined one block It will take an hour
[/quote]
We definitely have not reach minimum mass to achieve target block times. If you have more idle cpus, please assign them, and ask your friends to do the same.
If you have GPU rigs mining other coins, consider having their CPUs mine this one, that would help a lot too.
Be calm, don't panic. The coin is only 2 days old. Its doing fine. It just needs time to build up some momentum.
Cassey
September 03, 2014, 11:13:29 PM
i can not clear this coin is cpu or gpu
CPU.
In theory, with a bit of effort by the GPU miner software developers (like bfgminer, cgminer, and sgminer), GPUs could be used - but no software has been identified that currently supports the high N level used by this coin. Even when they do, because of the high memory requirements of a N=16 n-scrypt coin, the advantage of GPUs will be limited over CPUs.
Cassey
"hashespersec" : 0,
what happen E3-1230 V3
That is not unusual, its hashing. Just check your CPU usage. Best I can tell its just a base sampling issue associated with the slow hashing rate this coins yields. On a Unix wallet I watch regularly, I see it bounce around between 0 and 20 or so, occasionally hitting 120, but rarely. I'll look into changing the units displayed so something more meaningful shows up - perhaps changing it to hash/minute?
For example, from my PC: http://puu.sh/bkAuV/839742f46c.png Note is was showing 75 on the previous getmininginfo, then 0.
Its a new coin, I'll work out these type of kinks as we find them.
look like mined one block It will take an hour
September 03, 2014, 11:04:55 PM
i can not clear this coin is cpu or gpu
CPU.
In theory, with a bit of effort by the GPU miner software developers (like bfgminer, cgminer, and sgminer), GPUs could be used - but no software has been identified that currently supports the high N level used by this coin. Even when they do, because of the high memory requirements of a N=16 n-scrypt coin, the advantage of GPUs will be limited over CPUs.
Cassey
setgenerate true
"hashespersec" : 0,
what happen E3-1230 V3
That is not unusual, its hashing. Just check your CPU usage. Best I can tell its just a base sampling issue associated with the slow hashing rate this coins yields. On a Unix wallet I watch regularly, I see it bounce around between 0 and 20 or so, occasionally hitting 120, but rarely. I'll look into changing the units displayed so something more meaningful shows up - perhaps changing it to hash/minute?
For example, from my PC: http://puu.sh/bkAuV/839742f46c.png Note is was showing 75 on the previous getmininginfo, then 0.
Its a new coin, I'll work out these type of kinks as we find them.
Update: Here is the problematic code, now just need to figure out what we can do about it:
Value gethashespersec(const Array& params, bool fHelp)
{
if (fHelp || params.size() != 0)
throw runtime_error(
"gethashespersec\n"
"Returns a recent hashes per second performance measurement while generating.");
if (GetTimeMillis() - nHPSTimerStart > 8000)
return (boost::int64_t)0;
return (boost::int64_t)dHashesPerSec;
}
September 03, 2014, 11:02:07 PM
i can not clear this coin is cpu or gpu
CPU.
In theory, with a bit of effort by the GPU miner software developers (like bfgminer, cgminer, and sgminer), GPUs could be used - but no software has been identified that currently supports the high N level used by this coin. Even when they do, because of the high memory requirements of a N=16 n-scrypt coin, the advantage of GPUs will be limited over CPUs.
Cassey
setgenerate true
04:02:38

gethashespersec
04:02:38

0
what happen E3-1230 V3
September 03, 2014, 10:36:48 PM
i can not clear this coin is cpu or gpu
CPU.
In theory, with a bit of effort by the GPU miner software developers (like bfgminer, cgminer, and sgminer), GPUs could be used - but no software has been identified that currently supports the high N level used by this coin. Even when they do, because of the high memory requirements of a N=16 n-scrypt coin, the advantage of GPUs will be limited over CPUs.
Cassey
Jump to: