[ANN] lolMiner-mnx, Mining MinexCoin(MNX) New version: v0.4 (July 22) - page 38.

Wa4A

newbie

Activity: 31

Merit: 0

Quote from: Lolliedieb on February 20, 2018, 06:08:05 AM

I see that there are many problems with that ...

I currently only have a two cards system and for this it works fine. I will rearrange the complete miner thread stuff for 0.21 and I hope this will fix it *crossing fingers*

Wait)

Lolliedieb

member

Activity: 433

Merit: 48

I see that there are many problems with that ...

I currently only have a two cards system and for this it works fine. I will rearrange the complete miner thread stuff for 0.21 and I hope this will fix it *crossing fingers*

Wa4A

newbie

Activity: 31

Merit: 0

Quote from: kdb on February 20, 2018, 02:49:15 AM

Windows 10, AMD Athlon II, RAM 4GB

3xGTX1070 do not work correctly

On start low speed

http://i6.pixs.ru/storage/9/3/3/02v3x1070s_1956580_29432933.png

http://i6.pixs.ru/storage/9/1/5/02v3x1070e_8729672_29432915.png

http://i6.pixs.ru/storage/9/2/4/02v3x1070e_1118952_29432924.png

http://i6.pixs.ru/storage/9/2/9/02v3x1070e_9714662_29432929.png

Same threads typing in same output in one of the time without queue.

1xGTX1070 show 10kSol/s, less than prev release

Likewise! Installed 5 cards 1060 * 3. When you run the first two cards - the hash holds about 10k, when I run all 5 cards, the speed drops to 100 sol

Add: Really! When you run 2 cards or two copies on one card, each card issues 10k +, but when you start the third instance, the speed starts to divide and the result is already 7-8k for each!

ZenoDiac

jr. member

Activity: 42

Merit: 1

The multiple GPU features does not work for me.
Adding --device 0,1,2,3,4,5 only splits the Hashrate between all the cards.
I have to run multiple instances of this v2 miner for it to hash properly, each with its own device. Will test if it crashes less.

Windows 10.
GTX 1080's
platform 0; hotfix off

FuSioNmAn

newbie

Activity: 8

Merit: 0

Try 0.2 on 4x rx480.
Bat file doesn't work. It call always device 0. I think that there is an error maybe in quotation of some char.
Launching by prompt with "--device 0,1,2,3" parameters it start on four card but goes to crash in few seconds.

kdb

newbie

Activity: 25

Merit: 0

Windows 10, AMD Athlon II, RAM 4GB

3xGTX1070 do not work correctly

On start low speed

http://i6.pixs.ru/storage/9/3/3/02v3x1070s_1956580_29432933.png

http://i6.pixs.ru/storage/9/1/5/02v3x1070e_8729672_29432915.png

http://i6.pixs.ru/storage/9/2/4/02v3x1070e_1118952_29432924.png

http://i6.pixs.ru/storage/9/2/9/02v3x1070e_9714662_29432929.png

Same threads typing in same output in one of the time without queue.

1xGTX1070 show 10kSol/s, less than prev release

Dirtpaw

jr. member

Activity: 192

Merit: 5

Tested ver. 0.2 on linux, g4400 cpu, 6x 1070ti. Started the miner with 6x gpus. Hashrate was around 5k per card (ver. 0.13 13k per card), dropped to 2k sols per card, then dropped to 2 sols per card and then the rig restarted. Will try with different number of gpus tomorrow. Using hotfix did nothing, still low hashrate and rig restarts.

ol92

sr. member

Activity: 445

Merit: 255

Quote from: promuckaj on February 19, 2018, 03:33:50 PM

It is good to see that you put a lot of efforts in this project, it is good to have a good miner for this algo under windows, but not so much for MNX, there is not a lot of sense because Optiminer is way better then this(I understand it is still in early development), but please consider that MNX will change algo later this year.

Performance with this miner for nvidia pascal is very good: now nvidia cards with this miner perform at similar level or even better than equivalent amd ones with optiminer.

I hope you will add zerocoin equihash version too ...

promuckaj

newbie

Activity: 21

Merit: 0

It is good to see that you put a lot of efforts in this project, it is good to have a good miner for this algo under windows, but not so much for MNX, there is not a lot of sense because Optiminer is way better then this(I understand it is still in early development), but please consider that MNX will change algo later this year.

r12x2

newbie

Activity: 68

Merit: 0

0.2 version has increased sols for RX560 from 2600S/s to 3200S/s, but it's still low vs optiminer (5000S/s)

beta1234

newbie

Activity: 9

Merit: 0

Quote from: Lolliedieb on February 19, 2018, 01:15:46 PM

Hi all out there having problems with passwords or multi-GPU in Windows ... Unfortunately I included some broken .bat file where I confuse PASS and PASSWORD...
so here is how it should look like:

Code:

@echo off

setlocal enableDelayedExpansion

Rem #################################
Rem ## Begin of user-editable part ##
Rem #################################

Rem Insert your pool name here
set "POOL=eu.minexpool.nl"
Rem Insert your pool port here
set "PORT=9999
Rem Insert your user and worker names here
set "USER=XQZoBeGPZJoLhTdkcF8bScsNH5Wyesd9g4.worker0"
Rem Insert your worker password here
set "PASS=x"

Rem Insert the index of the platform you want to run on. Run lolMiner-mnx.exe --list-devices
Rem to see all available platforms and the available devices for each platform
set "PLATFORM=0"
Rem Insert your devices to run the miner here. For multiple GPU pass a comma separated list, e.g.: 0,1 for using two GPUs
set "DEVICE=0"
Rem Uncommend the next line (by removing Rem) to enable the Nvidia CPU load fix
Rem set "HOTFIX=--enable-nv-hotfix"

Rem #################################
Rem ## End of user-editable part ##
Rem #################################

set "PARAMS=--server %POOL% --port %PORT% --user %USER% --pass %PASS% --device %DEVICE% --platform %PLATFORM% %HOTFIX%"

:MINE
Start /wait /high lolMiner-mnx.exe !PARAMS!
goto :MINE

One more fix for 0.21 in the bank Grin

The Miner is closing and opening every 1-2 Sec....
Doesnt work for me, not with 2 gpus, and not with 3 gpus.. closing/opening loop from the Miner
But Its finding all 3 devices right

Der Miner schließt sich jede Sekunde bis 2 und öffnet sich wieder und zack direkt wieder zu, wieder auf usw...endlos Sad

Er zeigt aber alle 3 Gpus richtig an

mk111

jr. member

Activity: 230

Merit: 1

Thanks changing PASSWORD to PASS fixed the issue where only device 0 was being used.

1 x 1070 on Windows 10 with V0.2 does 14000 sols
2 x 1070 on Windows 10 with v0.2 only does 7000 sols per card

I also tried enabling the Nvidia fix but it did not make any difference.

Good work sofar lolliedieb!

UrsaUrsa

member

Activity: 104

Merit: 11

Unfortunately this version runs like a 3 legged elephant on my 7x 1070 rig. Previous version, I can comfortably run two instances, getting around 12ksol on each card. This one gets me 7ksol at the beginning but frequently drops to lows of 500sols... I played around work batch, etc... nothing really helped. Back to v11 now. I hope you come up with a fix for multi gpu. Cheers!

Lolliedieb

member

Activity: 433

Merit: 48

Hi all out there having problems with passwords or multi-GPU in Windows ... Unfortunately I included some broken .bat file where I confuse PASS and PASSWORD...
so here is how it should look like:

Code:

@echo off

setlocal enableDelayedExpansion

Rem #################################
Rem ## Begin of user-editable part ##
Rem #################################

Rem Insert your pool name here
set "POOL=eu.minexpool.nl"
Rem Insert your pool port here
set "PORT=9999
Rem Insert your user and worker names here
set "USER=XQZoBeGPZJoLhTdkcF8bScsNH5Wyesd9g4.worker0"
Rem Insert your worker password here
set "PASS=x"

Rem Insert the index of the platform you want to run on. Run lolMiner-mnx.exe --list-devices
Rem to see all available platforms and the available devices for each platform
set "PLATFORM=0"
Rem Insert your devices to run the miner here. For multiple GPU pass a comma separated list, e.g.: 0,1 for using two GPUs
set "DEVICE=0"
Rem Uncommend the next line (by removing Rem) to enable the Nvidia CPU load fix
Rem set "HOTFIX=--enable-nv-hotfix"

Rem #################################
Rem ## End of user-editable part ##
Rem #################################

set "PARAMS=--server %POOL% --port %PORT% --user %USER% --pass %PASS% --device %DEVICE% --platform %PLATFORM% %HOTFIX%"

:MINE
Start /wait /high lolMiner-mnx.exe !PARAMS!
goto :MINE

One more fix for 0.21 in the bank Grin

AndreasSantonio

newbie

Activity: 34

Merit: 0

Quote from: Lolliedieb on February 19, 2018, 12:58:13 PM

Quote from: AndreasSantonio on February 19, 2018, 12:33:04 PM

GPU load is only 10-15%

But I asked for CPU not GPU ^^
By the way: you did not use the hotfix ... you are running on AMD? Then I would recommend to use optiminer, that one is faster for AMD right now. For Nvidia you should add the --enable_nv_hotfix, because else it is likely that 6 GPUs will cause a lot of load and a segmentation fault - unless you have some Ryzen Threadripper or Intel equivalent in that system.

It' s my error, CPU load 10-15%. Not amd, my system: i7 7700 + gtx1060x6.

Lolliedieb

member

Activity: 433

Merit: 48

Quote from: AndreasSantonio on February 19, 2018, 12:33:04 PM

GPU load is only 10-15%

But I asked for CPU not GPU ^^

Better try that way:

Code:

#!/bin/bash
POOL=mnx.suprnova.cc
PORT=7077
USER=andreassantonio.Andreassant3
PASSWORD=1
PLATFORM=0
DEVICE=0,1,2,3,4,5

cd "$(dirname "$0")"
while true
do
./lolMiner-mnx --server mnx.suprnova.cc --port 7077 --user andreassantonio.Andreassant3 --pass 1 --platform 0 --device 0,1,2,3,4,5 $@
if [ $? -eq 134 ]
then
break
fi
done

By the way: you did not use the hotfix ... you are running on AMD? Then I would recommend to use optiminer, that one is faster for AMD right now. For Nvidia you should add the --enable_nv_hotfix, because else it is likely that 6 GPUs will cause a lot of load and a segmentation fault - unless you have some Ryzen Threadripper or Intel equivalent in that system.

Quote from: Nihrupka on February 19, 2018, 12:38:29 PM

for me too
2x1070+2x1060 = speed like 1x1070
and segmentation fault

Can you show how you start the miner and what is the output of lolMiner-mnx --list-devices?

Nihrupka

newbie

Activity: 9

Merit: 0

Quote from: AndreasSantonio on February 19, 2018, 12:08:09 PM

In Ubuntu if run all the video cards in the same window, the performance drops very much. And the more cards, the lower the productivity of each.

for me too
2x1070+2x1060 = speed like 1x1070
and segmentation fault

AndreasSantonio

newbie

Activity: 34

Merit: 0

Quote from: Lolliedieb on February 19, 2018, 12:29:25 PM

How is your CPU load? Usually each GPU gets its own worker thread that is capsuled of the others.

As for the .bat problem: did you write in a password? When --pass is send to lolMiner the next element is treated as password. If you do "set "PASS=" this kind of kills the --device parameter.

What you can do is figuring out ideal commandline to run the miner without the .bat and then copy over the whole string to bat... that will also work

GPU load is only 10-15%

run_miner.sh file:

#!/bin/bash
POOL=mnx.suprnova.cc
PORT=7077
USER=andreassantonio.Andreassant3
PASSWORD=1
PLATFORM=0
DEVICE=0,1,2,3,4,5

cd "$(dirname "$0")"
while true
do
  ./lolMiner-mnx --server mnx.suprnova.cc --port 7077 --user andreassantonio.Andreassant3 --pass 1 --platform 0 --device DEVICE=0,1,2,3,4,5 $HOTFIX $@
  if [ $? -eq 134 ]
  then
   break
  fi
done

If start miner for each GPU - all work good.

Lolliedieb

member

Activity: 433

Merit: 48

How is your CPU load? Usually each GPU gets its own worker thread that is capsuled of the others.

As for the .bat problem: did you write in a password? When --pass is send to lolMiner the next element is treated as password. If you do "set "PASS=" this kind of kills the --device parameter.

What you can do is figuring out ideal commandline to run the miner without the .bat and then copy over the whole string to bat... that will also work

AndreasSantonio

newbie

Activity: 34

Merit: 0

In Ubuntu if run all the video cards in the same window, the performance drops very much. And the more cards, the lower the productivity of each.

Topic: [ANN] lolMiner-mnx, Mining MinexCoin(MNX) New version: v0.4 (July 22) - page 38. (Read 30772 times)