Topic: [ANN] lolMiner-mnx, Mining MinexCoin(MNX) New version: v0.4 (July 22) - page 40. (Read 30772 times)
February 16, 2018, 11:44:54 AM
Lolliedieb, periodically on different random video card Nvidia in the liner (v013 linux, processor 1151 4 cores) appear "error of segmentation" and the miner stops. in version 012, I did not see such an error ..
February 16, 2018, 11:08:47 AM
Ok...version 0.13 it's more stable.
Mining by 12 hours.
Test with one gpu AMD rx550 4gb (1.7k/s)
Mining by 12 hours.
Test with one gpu AMD rx550 4gb (1.7k/s)
Process goes down after 17/18 hours testing.
AMD rx550 4gb
Cpu I5 kaby Lake 7600k
32Gb ram
Fiber 100Mbit (60/20 real)
February 16, 2018, 10:05:31 AM
is there in miner some watchdog script?
February 16, 2018, 07:50:27 AM
just tested my vega 56 stock bios with core freq -10, mem 990, powerlimit +10 which makes +- 1965 on cryptonight, gives me 11.7ksol/s with lolminer. compared to 9.5 without tuning.
February 16, 2018, 06:37:07 AM
Ok...version 0.13 it's more stable.
Mining by 12 hours.
Test with one gpu AMD rx550 4gb (1.7k/s)
Mining by 12 hours.
Test with one gpu AMD rx550 4gb (1.7k/s)
February 16, 2018, 04:36:16 AM
I just made an interesting observation regarding headless displays and maybe also applies for ZenoDiac:
In Windows 10 it happens thst the order of Platforms is volatile when Intel GPU drivers are installed, because with monitor attached or much stress on GPU the Nvida (may also happen with AMD) is platform 0 but without anything platform 0 is Intel and platform 1 is Nvidia. Therefore it can happen that you instead run the Intel iGPU or even CPU when in wrong order.
I will try implementing something that allows auto detection, but currently when platform 0 device 0 is only giving 3 digit sols where there should be more than 5k, then try again with platform 1 device 0. Sometimes this may fix it.
In Windows 10 it happens thst the order of Platforms is volatile when Intel GPU drivers are installed, because with monitor attached or much stress on GPU the Nvida (may also happen with AMD) is platform 0 but without anything platform 0 is Intel and platform 1 is Nvidia. Therefore it can happen that you instead run the Intel iGPU or even CPU when in wrong order.
I will try implementing something that allows auto detection, but currently when platform 0 device 0 is only giving 3 digit sols where there should be more than 5k, then try again with platform 1 device 0. Sometimes this may fix it.
"There is no platform 1 on this system" error ...
Switched the Nvidia rig back to bminer/equihash for now. 2 AMD rigs - one with rx's and one with r9 290's seem to be doing fine. Not 100% stable, but only one instance crashes every now and again - randomly and without any sort of set time in between the crashes.
Just one question, are you able to mine minex with bminer ?
February 16, 2018, 04:19:53 AM
Its surprising that the G3900 does 5 cards at all. That CPU is very weak (only two threads) and due to Nvidia high CPU load with OpenCL and the work to be done sha-ing the results it is great to know it does 5 of these. Optiminer somehow found a better solution to handle the Nvidia OpenCL CPU load. I will try if I also can do better because the current situation where hash-rate drops from time to time and more cards make the system freeze is well ... undesirable ^^
Maybe thinking one month ahead I think I would like to implement a switch shifting the sha256 calculation to GPU as well ... then a G3900 should be able to power 6-8 cards when the tiny processor does not have to do the target calculation itself...
Next system has 5 GTX1050 and AMD Athlon II (that less powerfull) and lolMiner-MNX work great in 2 days. 6 GTX1050ti on next system with AMD Athlon II do not work correctly too.
February 16, 2018, 03:50:18 AM
Ubuntu 16.04, G3900, 4GB
I can start only 5 threads. System has freeze when I start 6th thread. With 7 threads I can't tested. Optiminer work correctly on this system. Now start 4 GPU with lolMiner-MNX and 3 with optiminer
I can start only 5 threads. System has freeze when I start 6th thread. With 7 threads I can't tested. Optiminer work correctly on this system. Now start 4 GPU with lolMiner-MNX and 3 with optiminer
Its surprising that the G3900 does 5 cards at all. That CPU is very weak (only two threads) and due to Nvidia high CPU load with OpenCL and the work to be done sha-ing the results it is great to know it does 5 of these. Optiminer somehow found a better solution to handle the Nvidia OpenCL CPU load. I will try if I also can do better because the current situation where hash-rate drops from time to time and more cards make the system freeze is well ... undesirable ^^
Maybe thinking one month ahead I think I would like to implement a switch shifting the sha256 calculation to GPU as well ... then a G3900 should be able to power 6-8 cards when the tiny processor does not have to do the target calculation itself...
February 16, 2018, 03:42:49 AM
I just made an interesting observation regarding headless displays and maybe also applies for ZenoDiac:
In Windows 10 it happens thst the order of Platforms is volatile when Intel GPU drivers are installed, because with monitor attached or much stress on GPU the Nvida (may also happen with AMD) is platform 0 but without anything platform 0 is Intel and platform 1 is Nvidia. Therefore it can happen that you instead run the Intel iGPU or even CPU when in wrong order.
I will try implementing something that allows auto detection, but currently when platform 0 device 0 is only giving 3 digit sols where there should be more than 5k, then try again with platform 1 device 0. Sometimes this may fix it.
In Windows 10 it happens thst the order of Platforms is volatile when Intel GPU drivers are installed, because with monitor attached or much stress on GPU the Nvida (may also happen with AMD) is platform 0 but without anything platform 0 is Intel and platform 1 is Nvidia. Therefore it can happen that you instead run the Intel iGPU or even CPU when in wrong order.
I will try implementing something that allows auto detection, but currently when platform 0 device 0 is only giving 3 digit sols where there should be more than 5k, then try again with platform 1 device 0. Sometimes this may fix it.
Great observation.
Using platform 1, device 0 works and it is hashing properly at around 15k/s now.
Thanks
However, you have to remove the hotfix for the hashrate to stay constant for headless displays after disconnecting from teamviewer.
February 16, 2018, 01:06:52 AM
Ubuntu 16.04, G3900, 4GB
I can start only 5 threads. System has freeze when I start 6th thread. With 7 threads I can't tested. Optiminer work correctly on this system. Now start 4 GPU with lolMiner-MNX and 3 with optiminer
Windows 10 + 1xGTX1050 work more then 2 days (crash after 30 min of post
)
Windows 10, AMD Athlon II 3xGTX1070
1xGTX1070
http://i12.pixs.ru/storage/8/2/9/1x10701min_5566932_29390829.png
3xGTX1070 (on start)
http://i12.pixs.ru/storage/8/4/6/3x107030se_8406699_29390846.png
3xGTX1070
http://i12.pixs.ru/storage/8/5/4/3x10702min_9948240_29390854.png
I can start only 5 threads. System has freeze when I start 6th thread. With 7 threads I can't tested. Optiminer work correctly on this system. Now start 4 GPU with lolMiner-MNX and 3 with optiminer
Windows 10 + 1xGTX1050 work more then 2 days (crash after 30 min of post
)Windows 10, AMD Athlon II 3xGTX1070
1xGTX1070
http://i12.pixs.ru/storage/8/2/9/1x10701min_5566932_29390829.png
3xGTX1070 (on start)
http://i12.pixs.ru/storage/8/4/6/3x107030se_8406699_29390846.png
3xGTX1070
http://i12.pixs.ru/storage/8/5/4/3x10702min_9948240_29390854.png
February 16, 2018, 12:57:19 AM
I just made an interesting observation regarding headless displays and maybe also applies for ZenoDiac:
In Windows 10 it happens thst the order of Platforms is volatile when Intel GPU drivers are installed, because with monitor attached or much stress on GPU the Nvida (may also happen with AMD) is platform 0 but without anything platform 0 is Intel and platform 1 is Nvidia. Therefore it can happen that you instead run the Intel iGPU or even CPU when in wrong order.
I will try implementing something that allows auto detection, but currently when platform 0 device 0 is only giving 3 digit sols where there should be more than 5k, then try again with platform 1 device 0. Sometimes this may fix it.
In Windows 10 it happens thst the order of Platforms is volatile when Intel GPU drivers are installed, because with monitor attached or much stress on GPU the Nvida (may also happen with AMD) is platform 0 but without anything platform 0 is Intel and platform 1 is Nvidia. Therefore it can happen that you instead run the Intel iGPU or even CPU when in wrong order.
I will try implementing something that allows auto detection, but currently when platform 0 device 0 is only giving 3 digit sols where there should be more than 5k, then try again with platform 1 device 0. Sometimes this may fix it.
"There is no platform 1 on this system" error ...
Switched the Nvidia rig back to bminer/equihash for now. 2 AMD rigs - one with rx's and one with r9 290's seem to be doing fine. Not 100% stable, but only one instance crashes every now and again - randomly and without any sort of set time in between the crashes.
February 16, 2018, 12:50:20 AM
@Monayman @goedi
I see you're also mining with 980ti/980.
Have a 980ti myself. I can't get it to hash properly (v12 or v13) getting like 100 sol/s, with or without hotfix it doesn't make a difference. Also using G3900 cpu. Perhaps you know of something I can do
Batch file as follow
lolMiner-mnx.exe --server eu.minexpool.nl --port 9999 --platform 0 --device 0 --user XKJRCWtcKC8CFsoMdXgmFF9tbMsQVvK4y8.BigZeno --enable-nv-hotfix
GeForce drivers are up to date
I can see it's not trying, cause the temperature isn't going up. Just casually working out 100sol/s.
Regards
-Zeno
I see you're also mining with 980ti/980.
Have a 980ti myself. I can't get it to hash properly (v12 or v13) getting like 100 sol/s, with or without hotfix it doesn't make a difference. Also using G3900 cpu. Perhaps you know of something I can do
Batch file as follow
lolMiner-mnx.exe --server eu.minexpool.nl --port 9999 --platform 0 --device 0 --user XKJRCWtcKC8CFsoMdXgmFF9tbMsQVvK4y8.BigZeno --enable-nv-hotfix
GeForce drivers are up to date
I can see it's not trying, cause the temperature isn't going up. Just casually working out 100sol/s.
Regards
-Zeno
The only difference between your batch file and mine is the --platform command, I do not use that. Try it without.
That said, I have only been semi-successful with my Nvidia cards and this miner. I can have it running stable now, but the "team viewer" problem - which was initially fixed with v0.13 - has returned.
February 16, 2018, 12:34:09 AM
Waiting for version that will use all GPUs with 1 instance.
February 16, 2018, 12:18:11 AM
Lolliedieb, make the time and date of the share in the miner. it is sometimes useful to see how long a break in work has been and whether the work is stable.
February 15, 2018, 04:51:19 PM
I just made an interesting observation regarding headless displays and maybe also applies for ZenoDiac:
In Windows 10 it happens thst the order of Platforms is volatile when Intel GPU drivers are installed, because with monitor attached or much stress on GPU the Nvida (may also happen with AMD) is platform 0 but without anything platform 0 is Intel and platform 1 is Nvidia. Therefore it can happen that you instead run the Intel iGPU or even CPU when in wrong order.
I will try implementing something that allows auto detection, but currently when platform 0 device 0 is only giving 3 digit sols where there should be more than 5k, then try again with platform 1 device 0. Sometimes this may fix it.
In Windows 10 it happens thst the order of Platforms is volatile when Intel GPU drivers are installed, because with monitor attached or much stress on GPU the Nvida (may also happen with AMD) is platform 0 but without anything platform 0 is Intel and platform 1 is Nvidia. Therefore it can happen that you instead run the Intel iGPU or even CPU when in wrong order.
I will try implementing something that allows auto detection, but currently when platform 0 device 0 is only giving 3 digit sols where there should be more than 5k, then try again with platform 1 device 0. Sometimes this may fix it.
February 15, 2018, 04:00:12 PM
@Monayman @goedi
I see you're also mining with 980ti/980.
Have a 980ti myself. I can't get it to hash properly (v12 or v13) getting like 100 sol/s, with or without hotfix it doesn't make a difference. Also using G3900 cpu. Perhaps you know of something I can do
Batch file as follow
lolMiner-mnx.exe --server eu.minexpool.nl --port 9999 --platform 0 --device 0 --user XKJRCWtcKC8CFsoMdXgmFF9tbMsQVvK4y8.BigZeno --enable-nv-hotfix
GeForce drivers are up to date
I can see it's not trying, cause the temperature isn't going up. Just casually working out 100sol/s.
Regards
-Zeno
I see you're also mining with 980ti/980.
Have a 980ti myself. I can't get it to hash properly (v12 or v13) getting like 100 sol/s, with or without hotfix it doesn't make a difference. Also using G3900 cpu. Perhaps you know of something I can do
Batch file as follow
lolMiner-mnx.exe --server eu.minexpool.nl --port 9999 --platform 0 --device 0 --user XKJRCWtcKC8CFsoMdXgmFF9tbMsQVvK4y8.BigZeno --enable-nv-hotfix
GeForce drivers are up to date
I can see it's not trying, cause the temperature isn't going up. Just casually working out 100sol/s.
Regards
-Zeno
February 15, 2018, 03:50:41 PM
The AFK hashrate drop seems to stop if you have your rig permanently connected to a display.
Removing the hotfix also solves the problem, but the strain on the CPU is not worth it and crashes a lot more.
Stable currently AFK with display connected.
Restarting every 1200s.
Let's see if it lasts through the night...
Removing the hotfix also solves the problem, but the strain on the CPU is not worth it and crashes a lot more.
Stable currently AFK with display connected.
Restarting every 1200s.
Let's see if it lasts through the night...
February 15, 2018, 03:33:32 PM
Sounds great - how do we get access to this and is there anything we can do to help - or collaborate?
February 15, 2018, 03:32:39 PM
It seems like --enable-nv-hotfix helped the miner from crashing/idling. I'll update more on how long the miner has been running but it's been on for 3-4 hours without stopping.
February 15, 2018, 02:43:00 PM
Share, who used this program, it on indicators has caught up with the Optiminer for linux?
Jump to: