[ANN] [LTC] [PPS] [OTP 2FA] [Stratum only] LTCMine PPS mining pool (3.3%) - page 69.

Tittiez

hero member

Activity: 686

Merit: 500

Love the pool, stales are slightly high but they are even worse on notroll + their fee is higher.

May I ask, what is the withdraw fee?

Balthazar

legendary

Activity: 3108

Merit: 1359

No, there is no connection between shares difficulty and the pool rate. Difficulty targeted to 6 shares per minute and recalculated every 600 seconds. If you solve more/less than 6 shares per minute, difficulty will grow/fall dynamically.

P.S. We prefer upgrading our hardware instead of difficulty increasing.

Lem

newbie

Activity: 78

Merit: 0

Balthazar, mining at 1260kh/s with two 7970s I frequently get a difficulty above 500. Isn't it a bit too much? I personally would like better something around 200 (300 at most) as for now. Or a value a bit quicker (I feel like it's very quick to climb up, but very slow to fall down).

Let me explain myself: of course even a difficulty of 2000 wouldn't be a real issue - and, some months ago, I used to BTCmine at 999-difficulty with a mining power of just about 1350Mh/s, so... go figure

))
I'm just curious about it: do you need to force so high difficulties to keep the traffic low? As the pool is growing, will they grow as well?

Thanks.

Balthazar

legendary

Activity: 3108

Merit: 1359

Not yet, but I will merge this code from pool.itzod.ru soon. Also minimum payout will be increased, because btc-e ignores transactions with volume less than 0.1 LTC.

Marrs

member

Activity: 112

Merit: 10

Is it possible to set up automatic payouts with ltcmine.ru?

Balthazar

legendary

Activity: 3108

Merit: 1359

Not yet. It was planned to implement after migration to new hardware, but we had not enough time for that at last week. Sad

I'll move pool to new hardware at this week, if there will be no another problems.

P.S. Anyway, I think that PPS 3.3% better than RBPPS 2.5%, because of orphans... Roll Eyes

tacotime

legendary

Activity: 1484

Merit: 1005

Was the pool ever updated with lower fees? Still mining here but may eventually move to coinotron for lower RBPPS.

Balthazar

legendary

Activity: 3108

Merit: 1359

Quote from: BitHits on April 06, 2013, 05:44:06 PM

Somethings seriously wrong...

Seems to only be counting stale shares, and then on top of that rejecting them

Code:

2013-04-06 17:48:34: Running command: poclbm.exe *****_0:*****ltcmine.ru:3333 --device=0 --platform=0 --verbose -r1 -v -w 128
2013-04-06 17:48:34: Listener for "ltcmine.ru" started
2013-04-06 17:48:36: Listener for "ltcmine.ru": ltcmine.ru:3333 06/04/2013 17:48:36, checking for stratum...
2013-04-06 17:48:36: Listener for "ltcmine.ru": ltcmine.ru:3333 06/04/2013 17:48:36, started OpenCL miner on platform 0, device 0 (Juniper)
2013-04-06 17:48:37: Listener for "ltcmine.ru": ltcmine.ru:3333 06/04/2013 17:48:37, no response to getwork, using as stratum
2013-04-06 17:48:37: Listener for "ltcmine.ru": ltcmine.ru:3333 06/04/2013 17:48:37, Setting new difficulty: 64

POCLBM is the "Python OpenCL Bitcoin Miner". It has no support for scrypt mining.

WhitePhantom

sr. member

Activity: 348

Merit: 250

Quote from: pooler on April 06, 2013, 03:44:50 PM

Quote from: WhitePhantom on April 06, 2013, 03:17:37 PM

CGMiner tells me that I'm averaging near 1 MH/s, but the pool only sees that I'm going ~25 KH/s. Here's the CGMiner command I use to start up.

cgminer --scrypt -o stratum+tcp://ltcmine.ru:3333 -u UserName_WorkerName -p Password -I 13 -g 2

See those high HW figures? You are incurring in lots of hardware errors.
https://bitcointalksearch.org/topic/m.1731329

Thank you! I'm closing in on getting everything working right.

BitHits

full member

Activity: 196

Merit: 100

Somethings seriously wrong...

Seems to only be counting stale shares, and then on top of that rejecting them

Code:

2013-04-06 17:48:34: Running command: poclbm.exe *****_0:*****ltcmine.ru:3333 --device=0 --platform=0 --verbose -r1 -v -w 128
2013-04-06 17:48:34: Listener for "ltcmine.ru" started
2013-04-06 17:48:36: Listener for "ltcmine.ru": ltcmine.ru:3333 06/04/2013 17:48:36, checking for stratum...
2013-04-06 17:48:36: Listener for "ltcmine.ru": ltcmine.ru:3333 06/04/2013 17:48:36, started OpenCL miner on platform 0, device 0 (Juniper)
2013-04-06 17:48:37: Listener for "ltcmine.ru": ltcmine.ru:3333 06/04/2013 17:48:37, no response to getwork, using as stratum
2013-04-06 17:48:37: Listener for "ltcmine.ru": ltcmine.ru:3333 06/04/2013 17:48:37, Setting new difficulty: 64

Balthazar

legendary

Activity: 3108

Merit: 1359

Oh yes

pooler

hero member

Activity: 839

Merit: 507

Quote from: WhitePhantom on April 06, 2013, 03:17:37 PM

CGMiner tells me that I'm averaging near 1 MH/s, but the pool only sees that I'm going ~25 KH/s. Here's the CGMiner command I use to start up.

cgminer --scrypt -o stratum+tcp://ltcmine.ru:3333 -u UserName_WorkerName -p Password -I 13 -g 2

CGMiner Screen Shot:

See those high HW figures? You are incurring in lots of hardware errors.
https://bitcointalksearch.org/topic/m.1731329

WhitePhantom

sr. member

Activity: 348

Merit: 250

Quote from: Balthazar on April 06, 2013, 03:22:23 PM

Thank you for your feedback, we are already investigating this issue. Roll Eyes

It seems that we possible have non-deterministic compatibility problem with new versions of cg/bfgminer. Undecided

More info will be available later.

I'm having this problem on other pools too.

What version of CGMiner would you recommend for now?

Balthazar

legendary

Activity: 3108

Merit: 1359

Thank you for your feedback, we are already investigating this issue. Roll Eyes

It seems that we possible have non-deterministic compatibility problem with new versions of cg/bfgminer. Undecided

More info will be available later.

WhitePhantom

sr. member

Activity: 348

Merit: 250

Can anybody give me advice on this? I've been into BTC mining for over a year, but I'm fairly new to LTC mining. ANY insight will be helpful.

CGMiner tells me that I'm averaging near 1 MH/s, but the pool only sees that I'm going ~25 KH/s. Here's the CGMiner command I use to start up.

cgminer --scrypt -o stratum+tcp://ltcmine.ru:3333 -u UserName_WorkerName -p Password -I 13 -g 2

CGMiner Screen Shot:

CGWatcher Screen Shot (taken about 10 minutes later):

Thanks in advance for any advice!

zulzedd

sr. member

Activity: 406

Merit: 250

Quote from: Balthazar on April 05, 2013, 06:33:03 AM

You should use "-pa scrypt" parameter.

Thanks for your answer, but tried that. miner_proxy doing well, but reaper.exe just instantly closing on execution in this case.
Here is .bat i using for miner_scrypt.exe:

Code:

start mining_proxy.exe -pa scrypt -o coinotron.com -p 3334

and reaper confs again:

reaper.conf

Code:

kernel reaper.cl
save_binaries yes
enable_graceful_shutdown no
long_polling yes
platform 0
device 0

mine litecoin

litecoin.conf

Code:

host 127.0.0.1
port 8332
user user
pass pass

worksize 256
vectors 1
aggression 20
threads_per_gpu 1
sharethreads 16
lookup_gap 2
gpu_thread_concurrency 16385

I'm using stratum and reaper, which i get here http://ltcmine.ru/faq

Balthazar

legendary

Activity: 3108

Merit: 1359

Updated previous post already Wink

zulzedd

sr. member

Activity: 406

Merit: 250

Quote from: Balthazar on April 05, 2013, 06:33:03 AM

Share diff is too high.

Ty, for answer!
But what can i do with this? I'm total newbie..

Balthazar

legendary

Activity: 3108

Merit: 1359

You should use "-pa scrypt" parameter.

zulzedd

sr. member

Activity: 406

Merit: 250

Can i ask for help with stratum&reaper configuration here?
My problem:
https://bitcointalksearch.org/topic/asking-for-help-reaper-coinotron-stratum-167821

Topic: [ANN] [LTC] [PPS] [OTP 2FA] [Stratum only] LTCMine PPS mining pool (3.3%) - page 69. (Read 227562 times)