Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 159. (Read 794394 times)
August 31, 2015, 09:52:00 PM
I notice that you changed the multiplier of X11, quark etc. What is the required miner to achieve that?
August 30, 2015, 12:51:20 PM
Does the Antminer S4 Nicehash Firmware has the voltage flag lock removed?
August 28, 2015, 11:18:43 AM
Use packet sniffer or contact [email protected] and you will get access to private debug proxy for further review by us.
August 28, 2015, 10:09:22 AM
I'm having problems connecting to the US scrypt URL. I'm using the latest (as of a week or two ago) bfgminer under Minera with a Zeus Thunder X3.
I can connect fine to the EU server:
But not the US server:
The rig is in Campbell California, so it's right around the corner from San Jose.
I've tried disabling the profitability option in the password field. I also tried with and without "#xnsub" (originally the problem was without this option). Neither change helps.
I've got two other rigs in the same LAN running an older cpuminer and old Minera with gridseed 5 chips that can connect to scrypt.usa.nicehash.com with no problem. All three rigs are behind a firewall, so they appear to the outside world to be from a single WAN address.
Here's my command line for the problematic rig:
Here's the excerpt from the json config file for the US pool (with the receive address and worker name removed):
Originally I thought it might be a routing problem, but then why do the other rigs in the same LAN connect to the US server fine? Then I thought maybe it's a bfgminer problem, but why would it connect to the EU server and not the US server?
I've got several pools configured on the problematic rig and it can connect to all of them except the Nicehash US server.
Any ideas?
I can connect fine to the EU server:
Code:
[2015-08-28 07:33:23] Pool 4 stratum+tcp://scrypt.eu.nicehash.com:3333/#xnsub alive
But not the US server:
Code:
[2015-08-28 07:33:53] Testing pool stratum+tcp://scrypt.usa.nicehash.com:3333/#xnsub
[2015-08-28 07:33:53] Closing socket for stratum pool 3
[2015-08-28 07:33:53] Closing socket for stratum pool 3
The rig is in Campbell California, so it's right around the corner from San Jose.
I've tried disabling the profitability option in the password field. I also tried with and without "#xnsub" (originally the problem was without this option). Neither change helps.
I've got two other rigs in the same LAN running an older cpuminer and old Minera with gridseed 5 chips that can connect to scrypt.usa.nicehash.com with no problem. All three rigs are behind a firewall, so they appear to the outside world to be from a single WAN address.
Here's my command line for the problematic rig:
Code:
/var/www/minera/minera-bin/bfgminer --scrypt -S zus:all --set zus:chips=128 --set zus:clock=332 --scan-time=1 -c /var/www/minera/conf/miner_conf.json
Here's the excerpt from the json config file for the US pool (with the receive address and worker name removed):
Code:
{
"url": "stratum+tcp:\/\/scrypt.usa.nicehash.com:3333\/#xnsub",
"user": "HIDDEN_ADDRESS.WORKER",
"pass": "x"
},
"url": "stratum+tcp:\/\/scrypt.usa.nicehash.com:3333\/#xnsub",
"user": "HIDDEN_ADDRESS.WORKER",
"pass": "x"
},
Originally I thought it might be a routing problem, but then why do the other rigs in the same LAN connect to the US server fine? Then I thought maybe it's a bfgminer problem, but why would it connect to the EU server and not the US server?
I've got several pools configured on the problematic rig and it can connect to all of them except the Nicehash US server.
Any ideas?
August 28, 2015, 07:30:45 AM
Hi, are the fees different when using the nicehashbot ?
I started some orders of 0.2btc and the orders started with 0.184btc?
I started some orders of 0.2btc and the orders started with 0.184btc?
No, fees are of course not set by bot but by the service itself and therefore the fees are the same no matter how you submit an order (via web, via API or via Bot). Please take a look at your transaction history and you'll see the details of your transactions and fees.
Best regards,
NiceHash
August 27, 2015, 08:25:26 AM
Hi, are the fees different when using the nicehashbot ?
I started some orders of 0.2btc and the orders started with 0.184btc?
I started some orders of 0.2btc and the orders started with 0.184btc?
August 27, 2015, 03:26:22 AM
Link for connect titan miner at nicehash pool
Server link
Server link
You can mine Scrypt or Scrypt-N (ScryptNf algorithm with n=11 setting) with Titans. You can see profitability ratio at our homepage https://www.nicehash.com ... if profitability of ScryptNf is better then Scrypt, then you can connect to ScryptNf port:
Code:
stratum+tcp://scryptnf.eu.nicehash.com:3335/#xnsub#skipcbcheck
otherwise connect to standard Scrypt port:
Code:
stratum+tcp://scrypt.eu.nicehash.com:3333/#xnsub#skipcbcheck
(change .eu with .usa depending on your location)
Thank you for using our service!
August 26, 2015, 06:14:56 PM
Link for connect titan miner at nicehash pool
Server link
Server link
August 23, 2015, 02:19:02 PM
I see in your Auto-Switching Multi-Algorithm sgminer example that you have both the whirlpoolx and Lyra2REv2 algorithms.
Is there a version of sgminer that supports both the whirlpoolx algorithm and Lyra2REv2?
Is there a version of sgminer that supports both the whirlpoolx algorithm and Lyra2REv2?
No, currently we are not aware of any sgminer version, that would support both, therefore you should disable either of the algorithm (by using fX=0). We hope that sgminer devs will soon release a version of sgminer that would support both algorithms.
Kind regards,
NiceHash.
August 23, 2015, 01:22:25 PM
Quote
{
"name" : "NiceHash_WhirlpoolX_multi",
"url" : "stratum+tcp://whirlpoolx.eu.nicehash.com:4343",
"user" : "BTC_address",
"pass" : "x",
"nfactor" : "10",
"algorithm" : "whirlpoolx"
},
{
"name" : "NiceHash_Lyra2REv2_multi",
"url" : "stratum+tcp://lyra2rev2.eu.nicehash.com:4347",
"user" : "BTC_address",
"pass" : "x",
"nfactor" : "10",
"algorithm" : "Lyra2REv2"
}
"name" : "NiceHash_WhirlpoolX_multi",
"url" : "stratum+tcp://whirlpoolx.eu.nicehash.com:4343",
"user" : "BTC_address",
"pass" : "x",
"nfactor" : "10",
"algorithm" : "whirlpoolx"
},
{
"name" : "NiceHash_Lyra2REv2_multi",
"url" : "stratum+tcp://lyra2rev2.eu.nicehash.com:4347",
"user" : "BTC_address",
"pass" : "x",
"nfactor" : "10",
"algorithm" : "Lyra2REv2"
}
I see in your Auto-Switching Multi-Algorithm sgminer example that you have both the whirlpoolx and Lyra2REv2 algorithms.
Is there a version of sgminer that supports both the whirlpoolx algorithm and Lyra2REv2?
August 22, 2015, 12:03:50 PM
ethereum pool will run?
Unfortunately Ethereum doesn't support stratum protocol for mining, therefore integration of Ether mining in NiceHash is not possible at the moment. But we're already working on it and we will try to add support for it in the future.
August 22, 2015, 10:14:36 AM
ethereum pool will run?
August 19, 2015, 07:27:46 PM
Short notice for miners on Lyra2REv2: Please note that if you're using sgminer under Windows you should NOT use AMD Catalyst driver 15.x since you'll only get HW errors on Lyra2REv2 algorithm. Instead use 14.4 Catalyst drivers.
this seems to be the same when compiling djm34 sgminer lyra2rev2 under linux also ...
many many MANY hardware errors ...
#crysx
August 19, 2015, 06:32:02 PM
Short notice for miners on Lyra2REv2: Please note that if you're using sgminer under Windows you should NOT use AMD Catalyst driver 15.x since you'll only get HW errors on Lyra2REv2 algorithm. Instead use 14.4 Catalyst drivers.
August 19, 2015, 02:44:17 AM
Your order #?
i just changed everything and made a new order since im tired of competing with that
ill just wait till night time, i guess, to hash when they are asleep and their orders run out
depends on their time zone and not even that if it's a bot ;-)
August 18, 2015, 05:40:01 PM
Your order #?
i just changed everything and made a new order since im tired of competing with that
ill just wait till night time, i guess, to hash when they are asleep and their orders run out
August 18, 2015, 02:51:06 AM
Hello, miners.
If you're mining Lyra2REv2 with ccminer you should immediately update your ccminer to the latest official release, more information here: https://www.nicehash.com/index.jsp?p=news&id=29.
Best regards,
NiceHash team
If you're mining Lyra2REv2 with ccminer you should immediately update your ccminer to the latest official release, more information here: https://www.nicehash.com/index.jsp?p=news&id=29.
Best regards,
NiceHash team
August 18, 2015, 02:07:54 AM
Your order #?
August 17, 2015, 11:29:37 PM
why is it when i have an standard but limited order running someone can place a standard non limited order after me at the same amount and i lose all miners?
this happens over and over all day and the only way around is to increase order price and they just do the same and still get the miners
shouldnt i get preference since my order was placed 1st?
this happens over and over all day and the only way around is to increase order price and they just do the same and still get the miners
shouldnt i get preference since my order was placed 1st?
August 15, 2015, 10:37:40 AM
well im happy after almost 1 day mining i like eu site and love da money , seeing hash go up so pays more is nice , wait its nice hash 
thanks guys
thanks guys
Jump to: