So decided to upgrade my units to use the extranonce patch at westhash/nicehash.
To cut a long story short:
-Step one was to upgrade the firmware to antminer_S320141126.bin. The result was: my units mined perfectly well on AntPool but on any other pool including Westhash, they dropped below 100 GHS.
- I tried most of the suggestions on the Bitmain discussion thread and elsewhere...but to no avail.
- In the end, I went back to original firmware. While doing so, one of my S3s got stuck for about 30 minutes while i was flashing it. Now i cannot connect to that S3. Even the reset button did not help me. That S3 is now incommunicado. Luckily, I still have 2 weeks left on its warranty and can likely do an RMA.
Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 217. (Read 794394 times)
December 14, 2014, 03:35:32 PM
December 14, 2014, 02:44:07 PM
Same problem
https://blockchain.info/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc
https://blockchain.info/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc
It isn't coming with Blockchain.info and Blockexplorer.com but is coming in https://www.blocktrail.com/BTC/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc and http://btc.blockr.io/tx/info/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc .
~~MZ~~
What's wrong with the network then? Usually posts within 30 min or so. It's been almost 3 hrs.
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
December 14, 2014, 02:27:27 PM
Thanks for response.
I haven't set #xnsub and it worked fine until yesterday...
I haven't set #xnsub and it worked fine until yesterday...
Can you please post the contents of your .bat file or config file here?
~~MZ~~
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
December 14, 2014, 02:25:34 PM
Same problem
https://blockchain.info/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc
https://blockchain.info/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc
It isn't coming with Blockchain.info and Blockexplorer.com but is coming in https://www.blocktrail.com/BTC/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc and http://btc.blockr.io/tx/info/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc .
~~MZ~~
December 14, 2014, 02:14:45 PM
December 14, 2014, 01:57:24 PM
Anyone else seeing a payout from transaction f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc but not posting to account. Clicking it also says transaction not found on blockchain.info
Curious.
Curious.
having the same issue as ircactus
https://blockchain.info/tx/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc
edit: resolved
December 14, 2014, 01:55:59 PM
@Searing The high btc rental rates will last till the 19th.
That would be awesome for sure.
Many people including me are mining for paycoin. The POW phase will end on 19th.
December 14, 2014, 01:30:44 PM
Anyone else seeing a payout from transaction f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc but not posting to account. Clicking it also says transaction not found on blockchain.info
Curious.
Curious.
http://btc.blockr.io/tx/info/f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc
December 14, 2014, 01:16:24 PM
@Searing The high btc rental rates will last till the 19th.
That would be awesome for sure.
December 14, 2014, 01:15:38 PM
Anyone else seeing a payout from transaction f0ff29e0153bea25c5580505e5140ee236460a615c3fce4b197ae99958c22dcc but not posting to account. Clicking it also says transaction not found on blockchain.info
Curious.
:: Resolved
Curious.
:: Resolved
December 14, 2014, 01:15:07 PM
@Searing The high btc rental rates will last till the 19th.
December 14, 2014, 12:56:37 PM
this is interesting making the same coin .007 btc a day on slush on the jupiter 550gh in like 5 hours on nicehash heh
wonder how long this is gonna last
also they have a patch for cgminer for the reboot stuff mine reboots about 6x an hour it is on the nicehash or westhash pages
unsure if i can use it with a cgminer 4.3 by knc on an oct 550gh jupiter they say you have to upgrade to cgminer 4.7 no idea
if such is compatible with kncminer and if so would i have to do the patch and such
no idea about unbuntu i just turn the putty on and hit updates
anyway any linux guru's on here with the patch working on their jupiters feel free to pipe in here
*use small simple words.....*
other then the 6x an hour it phases out the connection it seems to be working ok go baby go
wonder how long this is gonna last
also they have a patch for cgminer for the reboot stuff mine reboots about 6x an hour it is on the nicehash or westhash pages
unsure if i can use it with a cgminer 4.3 by knc on an oct 550gh jupiter they say you have to upgrade to cgminer 4.7 no idea
if such is compatible with kncminer and if so would i have to do the patch and such
no idea about unbuntu i just turn the putty on and hit updates
anyway any linux guru's on here with the patch working on their jupiters feel free to pipe in here
*use small simple words.....*
other then the 6x an hour it phases out the connection it seems to be working ok go baby go
December 14, 2014, 12:55:58 PM
I am using antminer s3+ and set Nicehash as my pool as
1: betarigs
2: nicehash
3: ghash.io
I don't know why but nicehash is dead on my miner side although nicehash is not down.
Could you guess what is the problem?
Thanks
1: betarigs
2: nicehash
3: ghash.io
I don't know why but nicehash is dead on my miner side although nicehash is not down.
Could you guess what is the problem?
Thanks
I guess you are using cgminer and have added #xnsub. Try to remove #xnsub and restart miner. Can you please post the contents of your .bat file or config file here?
Post between code tag which you can find it the icons.~~MZ~~
Thanks for response.
I haven't set #xnsub and it worked fine until yesterday...
December 14, 2014, 12:09:17 PM
I am using stratum+tcp://stratum.westhash.com:3334 which is the same url I am using on miningrigrentals. I wonder what the issue is. Does technical support usually look in this thread and help?
after you set the pool and submit, go to your main page and try 'restart minergate'
I tried that and I am also getting the same issue on my S4. I wonder if they are blocking me?
strange. sorry i couldn't be of more help
December 14, 2014, 11:58:45 AM
I am using stratum+tcp://stratum.westhash.com:3334 which is the same url I am using on miningrigrentals. I wonder what the issue is. Does technical support usually look in this thread and help?
after you set the pool and submit, go to your main page and try 'restart minergate'
I tried that and I am also getting the same issue on my S4. I wonder if they are blocking me?
December 14, 2014, 11:57:36 AM
I am using stratum+tcp://stratum.westhash.com:3334 which is the same url I am using on miningrigrentals. I wonder what the issue is. Does technical support usually look in this thread and help?
after you set the pool and submit, go to your main page and try 'restart minergate'
December 14, 2014, 11:56:30 AM
I am using stratum+tcp://stratum.westhash.com:3334 which is the same url I am using on miningrigrentals. I wonder what the issue is. Does technical support usually look in this thread and help?
December 14, 2014, 11:19:46 AM
I can't connect to your pool directly with my SP20s. My miner will not start mining. The only way I can connect to your pool is through miningrigrentals. Why is that?
my SP20's run fine on nicehash... maybe double check the stratum you are using?
December 14, 2014, 11:15:21 AM
I can't connect to your pool directly with my SP20s. My miner will not start mining. The only way I can connect to your pool is through miningrigrentals. Why is that?
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
December 14, 2014, 09:30:10 AM
Does anyone know why my AntMiner S3's keep dropping their hashrate after about 10 minutes? I'm mining on WestHash and haven't been here for a while, but everything seems to work well, then suddenly dead. I updated my S3's to cgminer with #xnsub support and don't know if that's the cause of the problem or if it's something else on WestHash's end. I took the p=price parameter out and still the same thing. I set my difficulty to 512 as well, but after the hashrate crash it seems to reset to 256. Anyone have any ideas?
Try to imcrease the difficulty, you can find the correct difficulty for hashrate in Nicehash FAQ. If you set a high frequency, it will crash too. Or it may happen due to the drivers. Try to delete driver and install the driver using Zadig. Can you post the .bat file or config file here? I maybe wrong, there maybe another possibilities.
P.S. It will also happen due to the power supply. I don't about power supply, so I can't help you in this if it is the problem.
~~MZ~~
Jump to: