Hi. I am trying you out for the first time. Newbie here, so forgive me. Using sgminer/scrypt and I can see my BTC address in the mining list. How often/are there set times when you pay out?
Also - dumb question here, but for your username, are you supposed to use a BTC address you have with your own BTC wallet, or do you use the BTC "deposit address" generated in the wallet on nicehash.com?
Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 310. (Read 794462 times)
May 15, 2014, 05:26:03 PM
May 15, 2014, 03:20:57 PM
Is there a way with sph-sgminer to set "per pool" parameters?
I want to make my primary pool NiceHash X11 - using the darkcoin kernel - and then have my backup pool be NiceHash scrypt -using the zuikkis kernel ...
I'm trying to find a way to allow the pools to each be defined with their own set of unique parameters to allow this.
Ideas?
as far as i know it COULD be done with .conf file so you can set kernels individually, but i thing this latest version does not support that yet.. If I'm wrong please correct me anyone..I want to make my primary pool NiceHash X11 - using the darkcoin kernel - and then have my backup pool be NiceHash scrypt -using the zuikkis kernel ...
I'm trying to find a way to allow the pools to each be defined with their own set of unique parameters to allow this.
Ideas?
Do you have an example of how to set the kernel per pool? I know you can set the scrypt algo per pool as I have done simultaneous scrypt and scrypt-n configurations before, but they share the same kernel. As far as I know the kernel parameter is a global setting. I would really like to see a per pool kernel config because I'm looking to do what Humancell is wanting to configure as well.
Ahh sry I'm typing without thinking.. I meant algo, not kernel... But I'm interested in this as well
May 15, 2014, 03:11:36 PM
Is there a way with sph-sgminer to set "per pool" parameters?
I want to make my primary pool NiceHash X11 - using the darkcoin kernel - and then have my backup pool be NiceHash scrypt -using the zuikkis kernel ...
I'm trying to find a way to allow the pools to each be defined with their own set of unique parameters to allow this.
Ideas?
as far as i know it COULD be done with .conf file so you can set kernels individually, but i thing this latest version does not support that yet.. If I'm wrong please correct me anyone..I want to make my primary pool NiceHash X11 - using the darkcoin kernel - and then have my backup pool be NiceHash scrypt -using the zuikkis kernel ...
I'm trying to find a way to allow the pools to each be defined with their own set of unique parameters to allow this.
Ideas?
Do you have an example of how to set the kernel per pool? I know you can set the scrypt algo per pool as I have done simultaneous scrypt and scrypt-n configurations before, but they share the same kernel. As far as I know the kernel parameter is a global setting. I would really like to see a per pool kernel config because I'm looking to do what Humancell is wanting to configure as well.
May 15, 2014, 03:06:02 PM
What is the calculation for diff when mining X11?
For example. .. if I've got 10MH/sec of X11 hashing ... what would be the recommended?
d=??? in the password?
For example. .. if I've got 10MH/sec of X11 hashing ... what would be the recommended?
d=??? in the password?
0.05 will give you a few shares per minute. If you want a smoother hashrate chart set it lower, 0.02 perhaps.
but isn't setting too low bad in the long run? it kinda makes more communication with server which adds up in time, so you actually end up mining less as you would with higher diff..?
May 15, 2014, 02:56:05 PM
Is there a way with sph-sgminer to set "per pool" parameters?
I want to make my primary pool NiceHash X11 - using the darkcoin kernel - and then have my backup pool be NiceHash scrypt -using the zuikkis kernel ...
I'm trying to find a way to allow the pools to each be defined with their own set of unique parameters to allow this.
Ideas?
as far as i know it COULD be done with .conf file so you can set kernels individually, but i thing this latest version does not support that yet.. If I'm wrong please correct me anyone.. I want to make my primary pool NiceHash X11 - using the darkcoin kernel - and then have my backup pool be NiceHash scrypt -using the zuikkis kernel ...
I'm trying to find a way to allow the pools to each be defined with their own set of unique parameters to allow this.
Ideas?
May 15, 2014, 11:24:51 AM
You should submit stale shares. If you are close enough, you will even get paid for them.
May 15, 2014, 10:49:59 AM
did pool just go down or is it just the front end? I cant get to the website..
has been fine for me, next time, check http://www.downforeveryoneorjustme.com/ for site up/down info.
@kenshirothefist, a question on config... do you prefer if the option for "--no-submit-stale" is used or not. I am unsure whether to allow my miner to submit stale shares as i know the hash power could very well be going to a multipool which encourages use of submitting stale shares as they may still be accepted.
thanks in advance for your response!
May 15, 2014, 09:49:54 AM
did pool just go down or is it just the front end? I cant get to the website..
May 15, 2014, 05:00:40 AM
Is there reward/ bonus if miner solved a block?
No, there is no reward, because you are actually mining for someone else.
May 15, 2014, 04:58:43 AM
Is there reward/ bonus if miner solved a block?
May 15, 2014, 04:19:16 AM
BTW: if you're a fan of reddit, you're welcome on our subreddit: http://www.reddit.com/r/NiceHash/
May 15, 2014, 04:02:13 AM
To all that have 0 diff bug: do you get expected speed on NiceHash?
Speed is ok, only display bug.
May 15, 2014, 03:57:35 AM
To all that have 0 diff bug: do you get expected speed on NiceHash?
May 15, 2014, 03:53:56 AM
Nicehashdev, you obviously have some errors in your sph-sgminer. It shows 0.000/-0.000 difficulty on all my X11 rigs, with any difficulty setting (manual and auto), and even on other pools! But if I switch to standard sph-sgminer 4.1.0, it works ok.
Indeed there is a bug for displaying diff. We'll take a look and released a patched version soon.
May 15, 2014, 02:11:59 AM
Nicehashdev, you obviously have some errors in your sph-sgminer. It shows 0.000/-0.000 difficulty on all my X11 rigs, with any difficulty setting (manual and auto), and even on other pools! But if I switch to standard sph-sgminer 4.1.0, it works ok.
May 14, 2014, 11:02:18 PM
Here are the results from my head-to-head comparison against Hashra. I have two identical RPI setups with qty ten 5-chip miners each. Since there is no way to distinguish between rigs on Nicehash's website, I used my BTC address for Hashra Controla and Michelem's donation BTC address for the Minera controller.
Hashra's Dashboard and Nicehash stats
Minera's Dashboard, Settings, and Nicehash stats
Looking through the log, it looks like it took about 6 hours for the autotune process to finish. Minera had FAR fewer rejects and HW. It's hard to tell from a short run like this which is the ultimate winner, but I think that Minera has a solid edge over Hashra.
Hashra's Dashboard and Nicehash stats
Minera's Dashboard, Settings, and Nicehash stats
Looking through the log, it looks like it took about 6 hours for the autotune process to finish. Minera had FAR fewer rejects and HW. It's hard to tell from a short run like this which is the ultimate winner, but I think that Minera has a solid edge over Hashra.
May 14, 2014, 08:45:51 PM
I got 1 gridseed and it does not work with cgminer moded (3.7.2), tried bfgminer and it does not detect gridseed, how can a gridseed work with nicehash?
On this computer i also got 2x r9 280x mining with sgminer already.
On this computer i also got 2x r9 280x mining with sgminer already.
Try this cpuminer by sandor111, https://github.com/siklon/cpuminer-gc3355/, Windows binaries at the bottom of page.
May 14, 2014, 07:43:05 PM
Is there a way with sph-sgminer to set "per pool" parameters?
I want to make my primary pool NiceHash X11 - using the darkcoin kernel - and then have my backup pool be NiceHash scrypt -using the zuikkis kernel ...
I'm trying to find a way to allow the pools to each be defined with their own set of unique parameters to allow this.
Ideas?
I want to make my primary pool NiceHash X11 - using the darkcoin kernel - and then have my backup pool be NiceHash scrypt -using the zuikkis kernel ...
I'm trying to find a way to allow the pools to each be defined with their own set of unique parameters to allow this.
Ideas?
May 14, 2014, 07:20:31 PM
I got 1 gridseed and it does not work with cgminer moded (3.7.2), tried bfgminer and it does not detect gridseed, how can a gridseed work with nicehash?
On this computer i also got 2x r9 280x mining with sgminer already.
On this computer i also got 2x r9 280x mining with sgminer already.
May 14, 2014, 07:06:36 PM
What is the calculation for diff when mining X11?
For example. .. if I've got 10MH/sec of X11 hashing ... what would be the recommended?
d=??? in the password?
For example. .. if I've got 10MH/sec of X11 hashing ... what would be the recommended?
d=??? in the password?
0.05 will give you a few shares per minute. If you want a smoother hashrate chart set it lower, 0.02 perhaps.
Jump to: