explain this shit???
not 1 reject on the miner, go to your site and your rejecting everything?
Topic: [ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool - page 313. (Read 794462 times)
May 14, 2014, 04:05:43 AM
http://i.imgur.com/DJa3Q2i.png
explain this shit???
not 1 reject on the miner, go to your site and your rejecting everything?
explain this shit???
not 1 reject on the miner, go to your site and your rejecting everything?
May 14, 2014, 03:37:51 AM
I'm using ccminer v1.0 for x11. I'm seeing hash <= target but it doesn't seem like that share is getting submitted? I don't see any yay! for them. Any idea what's up with this?
Greatwolf, I cant get ccminer to work with the x11 pool or cudaminer to work with the scrypt-n pool. I don't believe they have have the extranonce stuff programmed into it. Sadly this leaves out Nvidia cards from Nicehash outside the Scrypt pool.
I am running it with -D so it's spitting debug info out. I do see a parameter extranonce2 in there -- is that not being handled properly by ccminer? As a sidenote, ccminer works just fine for me on trademybits.com when mining x11 there.
You are throwing hash into the wind. No Yays = no accepted shares. So far nicehash is the only pool using the extranonce that I know of this is why it hasn't been a problem up to now for most users. Hopefully it will be fixed at somepoint in ccminer.
May 14, 2014, 03:05:45 AM
I'm using ccminer v1.0 for x11. I'm seeing hash <= target but it doesn't seem like that share is getting submitted? I don't see any yay! for them. Any idea what's up with this?
Greatwolf, I cant get ccminer to work with the x11 pool or cudaminer to work with the scrypt-n pool. I don't believe they have have the extranonce stuff programmed into it. Sadly this leaves out Nvidia cards from Nicehash outside the Scrypt pool.
I am running it with -D so it's spitting debug info out. I do see a parameter extranonce2 in there -- is that not being handled properly by ccminer? As a sidenote, ccminer works just fine for me on trademybits.com when mining x11 there.
May 14, 2014, 02:56:40 AM
I'm using ccminer v1.0 for x11. I'm seeing hash <= target but it doesn't seem like that share is getting submitted? I don't see any yay! for them. Any idea what's up with this?
Greatwolf, I cant get ccminer to work with the x11 pool or cudaminer to work with the scrypt-n pool. I don't believe they have have the extranonce stuff programmed into it. Sadly this leaves out Nvidia cards from Nicehash outside the Scrypt pool.
May 14, 2014, 02:21:52 AM
I'm using ccminer v1.0 for x11. I'm seeing hash <= target but it doesn't seem like that share is getting submitted? I don't see any yay! for them. Any idea what's up with this?
May 14, 2014, 12:03:30 AM
my speed is around 8mh/s when I start, and it drops to 7mh/s within an hour.
any suggestions? I havent set the d parameter though.
what should I set it to with my hashrate?
any suggestions? I havent set the d parameter though.
what should I set it to with my hashrate?
May 13, 2014, 11:08:01 PM
Hello admin NiceHash!
Tell, whether it is possible to use some workers with different difficulty (and with different ip-address)? As on other pools for example: 1BLUijX8cM3EhDHtqfTbHCi12JDwgfwCM4.1 or 1BLUijX8cM3EhDHtqfTbHCi12JDwgfwCM4_2 ?
Tell, whether it is possible to use some workers with different difficulty (and with different ip-address)? As on other pools for example: 1BLUijX8cM3EhDHtqfTbHCi12JDwgfwCM4.1 or 1BLUijX8cM3EhDHtqfTbHCi12JDwgfwCM4_2 ?
May 13, 2014, 10:34:09 PM
x11 pool not stable 
May 13, 2014, 10:27:23 PM
for x11, price per GH is for x11 hashrate or scrypt hashrate?
for X11 Hasrate
May 13, 2014, 09:43:40 PM
thanx for info.
[23:58:27] Stratum from stratum.nicehash.com requested work restart
[23:58:27] Stratum from stratum.nicehash.com requested work restart
This is normal, nothing to worry about.
Now it is really time to go get some x11 - paying 6.5 BTC/GH/day, way more than scrypt even.
for x11, price per GH is for x11 hashrate or scrypt hashrate?
May 13, 2014, 09:43:06 PM
Bummer. There are still some strange issues going on with my AntMiner S1s working against the pool with "price" thresholds.
I just came home and found my two test AntMiner S1s hung ... they *said* the NiceHash pool was alive ... but they were NOT mining it ... and they were NOT mining my backup pools.
Both were mining earlier in the day, and then when the 0.06 contracts expired, they fell back to the backup pools. That is where they were when I left the house. I come home and realized they were in some strange state ... not mining NiceHash nor the backup pools.
I had to restart the miners, and then they immediately jumped back to the backup pools as there are no 0.06 contracts.
Something is broken ...
I just came home and found my two test AntMiner S1s hung ... they *said* the NiceHash pool was alive ... but they were NOT mining it ... and they were NOT mining my backup pools.
Both were mining earlier in the day, and then when the 0.06 contracts expired, they fell back to the backup pools. That is where they were when I left the house. I come home and realized they were in some strange state ... not mining NiceHash nor the backup pools.
I had to restart the miners, and then they immediately jumped back to the backup pools as there are no 0.06 contracts.
Something is broken ...
ckolivas informed me, that idlebug is fixed in latest cgminer. Do you use latest cgminer?
I also wrote to Kano again with a private message to inquire about the fix. I asked if he was aware of the fix done by ckolivas, and if he had brought that into his fork.
May 13, 2014, 08:13:12 PM
i like x11 keeps gpus cooler 
May 13, 2014, 05:38:15 PM
thanx for info.
[23:58:27] Stratum from stratum.nicehash.com requested work restart
[23:58:27] Stratum from stratum.nicehash.com requested work restart
This is normal, nothing to worry about.
Now it is really time to go get some x11 - paying 6.5 BTC/GH/day, way more than scrypt even.
May 13, 2014, 04:03:06 PM
thanx for info.
[23:58:27] Stratum from stratum.nicehash.com requested work restart
i don`t have any rejected shares .
btc/gh/day is same thing with btc/mh/day ?
[23:58:27] Stratum from stratum.nicehash.com requested work restart
i don`t have any rejected shares .
btc/gh/day is same thing with btc/mh/day ?
May 13, 2014, 04:00:05 PM
Also it would be nice if you`ll have MH statistics, and payment statistics!
separately for all mining algorithms...
at least like http://www.middlecoin.com/reports/
Thank you.
separately for all mining algorithms...
at least like http://www.middlecoin.com/reports/
Thank you.
You do have that. Example: https://nicehash.com/index.jsp?p=miners&a=3&addr=1JXJ1NrRxiWQyNggmrEJdrxTj3yB9cx1Qe
Just click upper right corner (Miners/List) and find your address
May 13, 2014, 03:54:48 PM
hellow,
how often i will get paid ?
there is a minimum amount to be paid ?
thank you !
how often i will get paid ?
there is a minimum amount to be paid ?
thank you !
NiceHash @NiceHashMining
Payments are issued four times a day if balance is >0.01 BTC and one time a day if balance is >0.002 BTC.
May 13, 2014, 03:32:56 PM
Also it would be nice if you`ll have MH statistics, and payment statistics!
separately for all mining algorithms...
at least like http://www.middlecoin.com/reports/
Thank you.
separately for all mining algorithms...
at least like http://www.middlecoin.com/reports/
Thank you.
May 13, 2014, 03:21:01 PM
I'm having problems with my 5x R9 270X rig too.
Getting lots of rejects, 23% according to the 5 min. average, and also the combined accepted + rejected MH/s are significantly lower than what CGWatcher is reporting.
I'm using the recommended version of SGMiner.
Here's my config file
it's generating a lot of messages such as "Stratum from Pool 0 requested work restart"
Any ideas what might be wrong?
Getting lots of rejects, 23% according to the 5 min. average, and also the combined accepted + rejected MH/s are significantly lower than what CGWatcher is reporting.
I'm using the recommended version of SGMiner.
Here's my config file
Quote
{
"pools" : [
{
"name" : "NiceHash-X11",
"url" : "stratum+tcp://stratum.nicehash.com:3336",
"user" : "17x2du9tLNyyb96sY56fE4nDZ5hWFtwMJM",
"pass" : "d=0.04",
"pool-priority" : "0"
},
{
"name" : "DarkCoin.miningpoolhub.com",
"url" : "stratum+tcp://us-east1.darkcoin.miningpoolhub.com:20465",
"user" : "miner69er.1",
"pass" : "x",
"pool-priority" : "1"
}
],
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"gpu-engine" : "1150",
"gpu-memclock" : "1425",
"intensity" : "20",
"worksize" : "256",
"thread-concurrency" : "15232",
"lookup-gap" : "2",
"log" : "15",
"failover-only" : "true",
"sharelog" : "50",
"kernel" : "darkcoin"
}
"pools" : [
{
"name" : "NiceHash-X11",
"url" : "stratum+tcp://stratum.nicehash.com:3336",
"user" : "17x2du9tLNyyb96sY56fE4nDZ5hWFtwMJM",
"pass" : "d=0.04",
"pool-priority" : "0"
},
{
"name" : "DarkCoin.miningpoolhub.com",
"url" : "stratum+tcp://us-east1.darkcoin.miningpoolhub.com:20465",
"user" : "miner69er.1",
"pass" : "x",
"pool-priority" : "1"
}
],
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"gpu-engine" : "1150",
"gpu-memclock" : "1425",
"intensity" : "20",
"worksize" : "256",
"thread-concurrency" : "15232",
"lookup-gap" : "2",
"log" : "15",
"failover-only" : "true",
"sharelog" : "50",
"kernel" : "darkcoin"
}
it's generating a lot of messages such as "Stratum from Pool 0 requested work restart"
Any ideas what might be wrong?
May 13, 2014, 02:58:27 PM
Nicehash is broken today with the latest jmordica cgminer @github 2934c5a651
Anybody else got their gridseed blades working with nicehash today?
Anybody else got their gridseed blades working with nicehash today?
May 13, 2014, 02:50:12 PM
seem to have a problem, when I start it is nice 1350kh/s as it should, but after a while it goes to 1150-1250. here is the screen:
http://i60.tinypic.com/vfxo2c.png
seems like something is limiting it?
http://i60.tinypic.com/vfxo2c.png
seems like something is limiting it?
Jump to: