Topic: [ANN] Orbitcoin v1.6.0.0 ~ NeoScrypt ~ Green Stake ~ 4 Years Old - page 106. (Read 201256 times)
December 29, 2014, 07:43:23 AM
on bleutrade now trades to 4500 satoshi
December 27, 2014, 02:18:13 PM
What is the exchange orb is traded on the most?
or usecrypto.com ... becuase i have buy there ~2000 ORB
all server works again, payouts also 
December 27, 2014, 12:47:10 PM
What is the exchange orb is traded on the most?
Cryptsy
December 27, 2014, 12:43:45 PM
What is the exchange orb is traded on the most?
December 25, 2014, 02:18:13 PM
Hi dev,
I have a question: Do you plan to build the wallet with qt5? All my other wallets build fine but it seems Orbit still needs qt4.
Great job with this coin, BTW. Just starting to collect some.
Thanks in advance.
I have a question: Do you plan to build the wallet with qt5? All my other wallets build fine but it seems Orbit still needs qt4.
Great job with this coin, BTW. Just starting to collect some.
Thanks in advance.
Qt4 does the job just fine, so I haven't bothered myself even to compile Qt5. I see no advantage in replacing one with the other. I think it isn't difficult to make the current client Qt5 compatible if that matters.
December 25, 2014, 01:46:09 PM
Hi dev,
I have a question: Do you plan to build the wallet with qt5? All my other wallets build fine but it seems Orbit still needs qt4.
Great job with this coin, BTW. Just starting to collect some.
Thanks in advance.
I have a question: Do you plan to build the wallet with qt5? All my other wallets build fine but it seems Orbit still needs qt4.
Great job with this coin, BTW. Just starting to collect some.
Thanks in advance.
December 22, 2014, 04:51:45 PM
by cryptsy.com
Hello Mario,
I do apologize for the delay, I have notified our wallet specialist who has begun to look over the code, one everything looks good he will then begin to bring it back online. Thank you for your patience.
Sincerely
Mark
Cryptsy.com
Hello Mario,
I do apologize for the delay, I have notified our wallet specialist who has begun to look over the code, one everything looks good he will then begin to bring it back online. Thank you for your patience.
Sincerely
Mark
Cryptsy.com
December 22, 2014, 01:03:38 PM
Hey guys I tried sending my coins to the new wallet from the old in transactions of 20. I sent around 620 to the new wallet but only 100 showed up. TXID doesn't check out on the block chain either. The old wallet is stuck at 1070 blocks and 0 hours with only one connection. Do I need to reset the wallet?
If it doesn't show in a block explorer, it hasn't made itself to the block chain. What version is your old wallet? If it's v1.4.x.x, no surprise you're out of sync. You should have copied your old wallet.dat to v1.5.0.0 and got it synchronised before making any transactions.
Why did only 100 go through then?
They went through before v1.5 clients banned you. Since these coins were unspent on the new chain, they were allowed to get into blocks there.
December 22, 2014, 05:20:34 AM
Hey guys I tried sending my coins to the new wallet from the old in transactions of 20. I sent around 620 to the new wallet but only 100 showed up. TXID doesn't check out on the block chain either. The old wallet is stuck at 1070 blocks and 0 hours with only one connection. Do I need to reset the wallet?
If it doesn't show in a block explorer, it hasn't made itself to the block chain. What version is your old wallet? If it's v1.4.x.x, no surprise you're out of sync. You should have copied your old wallet.dat to v1.5.0.0 and got it synchronised before making any transactions.
Why did only 100 go through then?
They went through before v1.5 clients banned you. Since these coins were unspent on the new chain, they were allowed to get into blocks there.
December 22, 2014, 04:06:59 AM
Hey guys I tried sending my coins to the new wallet from the old in transactions of 20. I sent around 620 to the new wallet but only 100 showed up. TXID doesn't check out on the block chain either. The old wallet is stuck at 1070 blocks and 0 hours with only one connection. Do I need to reset the wallet?
If it doesn't show in a block explorer, it hasn't made itself to the block chain. What version is your old wallet? If it's v1.4.x.x, no surprise you're out of sync. You should have copied your old wallet.dat to v1.5.0.0 and got it synchronised before making any transactions.
Why did only 100 go through then?
You must work with version 1.5.0.0. also your old wallet.dat.
if the new wallet is sync, it start with orbitcoin-qt.exe -rescan. and check your balance again in your new wallet
December 22, 2014, 02:03:30 AM
Hey guys I tried sending my coins to the new wallet from the old in transactions of 20. I sent around 620 to the new wallet but only 100 showed up. TXID doesn't check out on the block chain either. The old wallet is stuck at 1070 blocks and 0 hours with only one connection. Do I need to reset the wallet?
If it doesn't show in a block explorer, it hasn't made itself to the block chain. What version is your old wallet? If it's v1.4.x.x, no surprise you're out of sync. You should have copied your old wallet.dat to v1.5.0.0 and got it synchronised before making any transactions.
Why did only 100 go through then?
December 21, 2014, 03:42:17 PM
Orbitcoin has switched to NeoScrypt just half an hour ago. To celebrate this and deal with a bit high PoW difficulty after switching from Scrypt, here we have some bounties:
1) 100 ORB to whoever mines the 1st NeoScrypt PoW block;
2) 10 ORB for each of 50 following NeoScrypt PoW blocks.
You also get the usual block reward of 1 ORB. Solo mine or join our pool http://dnb.io
Have fun!
UPDATE: The 1st ORB NeoScrypt block #1010099 was found by phantom at dnb.io pool. Congratulations
1) 100 ORB to whoever mines the 1st NeoScrypt PoW block;
2) 10 ORB for each of 50 following NeoScrypt PoW blocks.
You also get the usual block reward of 1 ORB. Solo mine or join our pool http://dnb.io
Have fun!
UPDATE: The 1st ORB NeoScrypt block #1010099 was found by phantom at dnb.io pool. Congratulations
According to the block chain, all these blocks after the switch were mined by the DNB pool. I'm going to send 600 ORB from our Advancement Fund to David, so he can credit 100 ORB to the finder of the 1st NeoScrypt block and distribute the remaining 500 ORB between miners of the following 50 blocks up to #1011416.
December 21, 2014, 02:47:33 PM
Hey guys I tried sending my coins to the new wallet from the old in transactions of 20. I sent around 620 to the new wallet but only 100 showed up. TXID doesn't check out on the block chain either. The old wallet is stuck at 1070 blocks and 0 hours with only one connection. Do I need to reset the wallet?
If it doesn't show in a block explorer, it hasn't made itself to the block chain. What version is your old wallet? If it's v1.4.x.x, no surprise you're out of sync. You should have copied your old wallet.dat to v1.5.0.0 and got it synchronised before making any transactions.
December 21, 2014, 01:28:07 PM
Hey guys I tried sending my coins to the new wallet from the old in transactions of 20. I sent around 620 to the new wallet but only 100 showed up. TXID doesn't check out on the block chain either. The old wallet is stuck at 1070 blocks and 0 hours with only one connection. Do I need to reset the wallet?
December 21, 2014, 05:49:23 AM
the best driver seems the 14.6 RC try it out if you want. Sgimer v5.01 is newer by release date.
https://www.nicehash.com/index.jsp?p=software
Latest sgminer-5.1-develop branch (recommended, includes badman74's Xn and Wolf0's NeoScrypt kernel speed-ups and more algorithms support):
sgminer-5.1-dev-2014-11-13-win32.zip
sgminer-5.1-dev-2014-11-13-linux-i386.zip
sgminer-5.1-dev-2014-11-13-linux-amd64.zip
GIT source code: https://github.com/sgminer-dev/sgminer/tree/develop
Wolf0's optimized NeoScrypt OpenCL kernel (double hash rate). Instructions: download, unzip, copy to your sgminer folder (overwrite existing neoscrypt.cl), delete neoscrypt*.bin files in your sgminer run directory and restart sgminer. Say thanks to Wolf0
Note: this kernel is already included in the above latest sgminer-5.1-develop branch.https://bitcointalksearch.org/topic/ann-sgminer-v5-optimized-x11x13neoscryptlyra2reetc-kernel-switch-miner-632503
&
https://github.com/sgminer-dev/sgminer/commits/master
-------------------------------------
killed a lot of time messing with curves variants and versions cgminer
and drivers 14.2 and 14.4
ep, sex with 14.6 missed ))
look at this is the last realease can find here
https://github.com/sgminer-dev/sgminer/releases
https://github.com/sgminer-dev/sgminer
with change
yes that is a bit annoying with the versions
December 21, 2014, 04:57:06 AM
Cryptsy wallet now under maintenance...
December 21, 2014, 04:17:06 AM
POS Diff now 0.10084
December 20, 2014, 03:14:43 PM
I guess this is the 1st time for the Orbitcoin PoS difficulty to hit 0.1. That's quite impressive. It was 0.02 to 0.03 for a long time until this month.
Orbitcoin 1019249
Orbitcoin 1019249
December 20, 2014, 08:01:25 AM
the best driver seems the 14.6 RC try it out if you want. Sgimer v5.01 is newer by release date.
https://www.nicehash.com/index.jsp?p=software
Latest sgminer-5.1-develop branch (recommended, includes badman74's Xn and Wolf0's NeoScrypt kernel speed-ups and more algorithms support):
sgminer-5.1-dev-2014-11-13-win32.zip
sgminer-5.1-dev-2014-11-13-linux-i386.zip
sgminer-5.1-dev-2014-11-13-linux-amd64.zip
GIT source code: https://github.com/sgminer-dev/sgminer/tree/develop
Wolf0's optimized NeoScrypt OpenCL kernel (double hash rate). Instructions: download, unzip, copy to your sgminer folder (overwrite existing neoscrypt.cl), delete neoscrypt*.bin files in your sgminer run directory and restart sgminer. Say thanks to Wolf0
Note: this kernel is already included in the above latest sgminer-5.1-develop branch.https://bitcointalksearch.org/topic/ann-sgminer-v5-optimized-x11x13neoscryptlyra2reetc-kernel-switch-miner-632503
&
https://github.com/sgminer-dev/sgminer/commits/master
-------------------------------------
killed a lot of time messing with curves variants and versions cgminer
and drivers 14.2 and 14.4
ep, sex with 14.6 missed ))
December 20, 2014, 07:45:21 AM
the best driver seems the 14.6 RC try it out if you want. Sgimer v5.01 is newer by release date.
Jump to: