setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
Just FYI those commands only need to be run once, the changes are permanent. setx GPU_USE_SYNC_OBJECTS 1
Topic: [ANN] profit switching auto-exchanging pool - www.middlecoin.com - page 141. (Read 829908 times)
January 31, 2014, 04:01:29 AM
January 31, 2014, 03:52:46 AM
To the folks who suggested Kalroth's cgminer with the xintensity feature, you have my thanks. His version is better in pretty much every way, near as I can tell. I have increased hash rates across the board. And I can run my Linux desktop on top of a 7950 doing 600kh/s without it seeming lagged.
Incidentally, I have my 7950's running with xintensity 4, gpu-threads 2, and shaders 1792. 280x's the same except shaders 2048.
Oh, and with this version, I can underclock the memory on my 7950's all the way down to 900Mhz with no change in hash rate, which saves a significant amount of power according to my kill-a-watt. The 280x's wouldn't accept anything but the default memory clock without throwing a fit, however.
Incidentally, I have my 7950's running with xintensity 4, gpu-threads 2, and shaders 1792. 280x's the same except shaders 2048.
Oh, and with this version, I can underclock the memory on my 7950's all the way down to 900Mhz with no change in hash rate, which saves a significant amount of power according to my kill-a-watt. The 280x's wouldn't accept anything but the default memory clock without throwing a fit, however.
Wait a minute, you are getting 600KH on a 7950 @stock? Can you please post all your settings and setup? I am barely getting 550KH @1050/1500. Thanks!
im getting 660kh with this setup
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer --scrypt -w 256 --shaders 0 --intensity 20 -v 1 -g 1 --lookup-gap 2 --thread-concurrency 21712 --gpu-engine 1100 --gpu-memclock 1500 --gpu-memdiff 0 --gpu-powertune 20 --temp-cutoff 90 --auto-fan -o address -u username -p password
That's fine because you're at intensity 20 and also overclocked. I'd like to know how he's getting 600KH at stock. I forgot to mention my card is Sapphire...
January 31, 2014, 03:40:34 AM
To the folks who suggested Kalroth's cgminer with the xintensity feature, you have my thanks. His version is better in pretty much every way, near as I can tell. I have increased hash rates across the board. And I can run my Linux desktop on top of a 7950 doing 600kh/s without it seeming lagged.
Incidentally, I have my 7950's running with xintensity 4, gpu-threads 2, and shaders 1792. 280x's the same except shaders 2048.
Oh, and with this version, I can underclock the memory on my 7950's all the way down to 900Mhz with no change in hash rate, which saves a significant amount of power according to my kill-a-watt. The 280x's wouldn't accept anything but the default memory clock without throwing a fit, however.
Incidentally, I have my 7950's running with xintensity 4, gpu-threads 2, and shaders 1792. 280x's the same except shaders 2048.
Oh, and with this version, I can underclock the memory on my 7950's all the way down to 900Mhz with no change in hash rate, which saves a significant amount of power according to my kill-a-watt. The 280x's wouldn't accept anything but the default memory clock without throwing a fit, however.
Wait a minute, you are getting 600KH on a 7950 @stock? Can you please post all your settings and setup? I am barely getting 550KH @1050/1500. Thanks!
im getting 660kh with this setup
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer --scrypt -w 256 --shaders 0 --intensity 20 -v 1 -g 1 --lookup-gap 2 --thread-concurrency 21712 --gpu-engine 1100 --gpu-memclock 1500 --gpu-memdiff 0 --gpu-powertune 20 --temp-cutoff 90 --auto-fan -o address -u username -p password
January 31, 2014, 03:37:51 AM
To the folks who suggested Kalroth's cgminer with the xintensity feature, you have my thanks. His version is better in pretty much every way, near as I can tell. I have increased hash rates across the board. And I can run my Linux desktop on top of a 7950 doing 600kh/s without it seeming lagged.
Incidentally, I have my 7950's running with xintensity 4, gpu-threads 2, and shaders 1792. 280x's the same except shaders 2048.
Oh, and with this version, I can underclock the memory on my 7950's all the way down to 900Mhz with no change in hash rate, which saves a significant amount of power according to my kill-a-watt. The 280x's wouldn't accept anything but the default memory clock without throwing a fit, however.
Incidentally, I have my 7950's running with xintensity 4, gpu-threads 2, and shaders 1792. 280x's the same except shaders 2048.
Oh, and with this version, I can underclock the memory on my 7950's all the way down to 900Mhz with no change in hash rate, which saves a significant amount of power according to my kill-a-watt. The 280x's wouldn't accept anything but the default memory clock without throwing a fit, however.
Wait a minute, you are getting 600KH on a 7950 @stock? Can you please post all your settings and setup? I am barely getting 550KH @1050/1500. Thanks!
January 31, 2014, 03:11:59 AM
Is the EU.middlecoin.com server still DOGE-only? Or is it now the same as the other beta servers?
January 31, 2014, 01:25:07 AM
Unusually high rejects for me too. It's normally around 3-4%, today it's closer to 6-8%. No changes on my side.
Great payout though.
Same numbers here as well...usually 4-5% for me, however, recently it's been closer to 8% Great payout though.
I'm on USEast with EU and then West as my backups.
January 31, 2014, 01:15:51 AM
3x Sapphire Vapor-X was 0.039 BTC yesterday with this rig. Running around 2/2.2Mh/s 1,5% rejection rate
January 31, 2014, 12:37:03 AM
Unusually high rejects for me too. It's normally around 3-4%, today it's closer to 6-8%. No changes on my side.
Great payout though.
Great payout though.
January 30, 2014, 11:14:53 PM
I was around 5-10% rejects but Ive been messing with my settings today, managed to get it down to 2% reject with I-18
Today was 0.0162 BTC per MH .... I like it
Today was 0.0162 BTC per MH .... I like it
January 30, 2014, 10:50:45 PM
Wow this reject rate is absolutely ridiculous. It's def from the coin switches. We are detecting new blocks literally every 2-3 seconds tonight. wtf.
Please limit those switchest at least by a minute or two, it's a complete waste of accepts.
Please limit those switchest at least by a minute or two, it's a complete waste of accepts.
I am not sure I agree; look at the un-exchanged
That means even bigger payouts in the next few days...
January 30, 2014, 10:32:21 PM
Wow this reject rate is absolutely ridiculous. It's def from the coin switches. We are detecting new blocks literally every 2-3 seconds tonight. wtf.
Please limit those switchest at least by a minute or two, it's a complete waste of accepts.
Please limit those switchest at least by a minute or two, it's a complete waste of accepts.
January 30, 2014, 10:23:52 PM
Highest I get on my Toxic 280x Tri-X OC TOXIC.... Is 805-815/Khz, But yeh Stability and heat = Not that good... Id rather have them at 755K/h Going 24/7 No issue.
How do you reach 765K/h? I mean I can keep tweaking but I just dont know when to stop how long have you tested this 765KH/
It is summer here also Im from Sydney - land of OZ
1800 / 1500
8192 I13 with 2 gpu is more stable than I19 with single and high thread concurrency for me. That improved bin file I linked to got me an extra 10 a card. I was at 755 as well before I tried it. in office at work (NZ) - can't wait till they are keeping me warm in winter.
Running a couple weeks rock solid at 765 - no restart now in over 14 days.
Back on topic - I can't get over the amount we're making in this pool considering the size we've got to. As much as I wish there was more information coming out of middlecoin the payouts kinda speak for themselves
[/quote]
Ha, also in NZ
and also waiting until I can turn my rigs into heaters. January 30, 2014, 10:20:35 PM
Back on topic - I can't get over the amount we're making in this pool considering the size we've got to. As much as I wish there was more information coming out of middlecoin the payouts kinda speak for themselves
Indeed. Just took a look at wafflepool and it seems they are finally starting pick up the pace with 660MH/s on the pool and daily payouts of around 0.013BTC/MH, which is pretty good in my opinion. Though in comparison here on middlecoin I made today almost 0.015BTC with just 750-800kh/s.
January 30, 2014, 10:07:25 PM
Highest I get on my Toxic 280x Tri-X OC TOXIC.... Is 805-815/Khz, But yeh Stability and heat = Not that good... Id rather have them at 755K/h Going 24/7 No issue.
How do you reach 765K/h? I mean I can keep tweaking but I just dont know when to stop how long have you tested this 765KH/
It is summer here also Im from Sydney - land of OZ
[/quote]
1800 / 1500
8192 I13 with 2 gpu is more stable than I19 with single and high thread concurrency for me. That improved bin file I linked to got me an extra 10 a card. I was at 755 as well before I tried it. in office at work (NZ) - can't wait till they are keeping me warm in winter.
Running a couple weeks rock solid at 765 - no restart now in over 14 days.
Back on topic - I can't get over the amount we're making in this pool considering the size we've got to. As much as I wish there was more information coming out of middlecoin the payouts kinda speak for themselves
January 30, 2014, 09:53:28 PM
Makes no sense; ASIC miners have completely taken over the SHA-256 mining arena to the point where it is laughable for anyone to suggest they'll mine a SHA-256 coin with a graphics card.
Without scrypt cgminer is a complete waste of electricity to run.
Without scrypt cgminer is a complete waste of electricity to run.
That is why he removed scrypt support in 3.8. From what I read, the developer of cgminer does not believe in altcoins, and does not want to support them or the code behind it. So 3.7.2 was the last version with scrypt support. cgminer is focused purely on SHA-256 for ASIC miners.
I don't know that is why the compiled versions are removed from the site, but it wouldn't surprise me. Regardless, other people have forked the code and support scrypt, Kalroth and whoever is doing sgminer.
http://k-dev.net/cgminer/
http://www.reddit.com/r/litecoinmining/comments/1va8g2/ann_sgminer_400_release/
I dig Kalroth's version so far because of the better reconnect times, but SGMiner seems solid too.
January 30, 2014, 09:49:25 PM
Whey have they removed the 3.7.2 Windows and Linux binaries from http://ck.kolivas.org/apps/cgminer/? Does anyone know?
Curd have you read any other part of the cgminer thread? 
January 30, 2014, 09:43:52 PM
I get 765 a card using ASUS R9 280x - can go higher but temps increase a lot and its summer here
Running BAMT 1.3
on middlecoin asia WU is always over 1400
Optimized scrypt kernel from reddit helped
http://www.reddit.com/r/dogemining/comments/1uj4uk/optimized_scrypt_kernel_for_hd7970_r9_280x/
Has anyone got them much faster than this?
Another great payout coming and I've leased my rig for the next 24 hours.
typical
Running BAMT 1.3
on middlecoin asia WU is always over 1400
Optimized scrypt kernel from reddit helped
http://www.reddit.com/r/dogemining/comments/1uj4uk/optimized_scrypt_kernel_for_hd7970_r9_280x/
Has anyone got them much faster than this?
Another great payout coming and I've leased my rig for the next 24 hours.
typicalHighest I get on my Toxic 280x Tri-X OC TOXIC.... Is 805-815/Khz, But yeh Stability and heat = Not that good... Id rather have them at 755K/h Going 24/7 No issue.
How do you reach 765K/h? I mean I can keep tweaking but I just dont know when to stop how long have you tested this 765KH/
It is summer here also Im from Sydney - land of OZ
January 30, 2014, 09:28:50 PM
Whey have they removed the 3.7.2 Windows and Linux binaries from http://ck.kolivas.org/apps/cgminer/? Does anyone know?
The CGminer guy is not interested in scrypt mining and even seems to go out of his way to phase it out. /shrug
Use sgminer or I recommend Kalroth's version:
http://k-dev.net/cgminer/
Makes no sense; ASIC miners have completely taken over the SHA-256 mining arena to the point where it is laughable for anyone to suggest they'll mine a SHA-256 coin with a graphics card.
Without scrypt cgminer is a complete waste of electricity to run.
January 30, 2014, 09:24:38 PM
Whey have they removed the 3.7.2 Windows and Linux binaries from http://ck.kolivas.org/apps/cgminer/? Does anyone know?
The CGminer guy is not interested in scrypt mining and even seems to go out of his way to phase it out. /shrug
Use sgminer or I recommend Kalroth's version:
http://k-dev.net/cgminer/
January 30, 2014, 08:43:44 PM
Whey have they removed the 3.7.2 Windows and Linux binaries from http://ck.kolivas.org/apps/cgminer/? Does anyone know?
Jump to: