Author

Topic: [ANN] profit switching auto-exchanging pool - www.middlecoin.com - page 140. (Read 829908 times)

newbie
Activity: 34
Merit: 0
What kind of hashrate are you getting with the 280X with Kalroth's cgminer?
715 at stock clock rates.  That's actually just about the same as with the unmodified cgminer since the 280x already likes 2 threads.  I have my overclock script running now, which will take until tomorrow to find the best clock rate.
The 280x's (all Powercolor) settled out to 715 for GPU 0 (no idea why it's so finicky) and 740 for the rest, and that's undervolted to 1.1V.  Unspectacular, but respectable.

Weirdly, the same core clock that gives 740kh on GPUs 1 to 4 drops GPU 0 down into the 500's. It insists on the stock 1030Mhz *shrug*
newbie
Activity: 34
Merit: 0
To the folks who suggested Kalroth's cgminer with the xintensity feature, you have my thanks.  His version is better in pretty much every way, near as I can tell.  I have increased hash rates across the board.  And I can run my Linux desktop on top of a 7950 doing 600kh/s without it seeming lagged.

Incidentally, I have my 7950's running with xintensity 4, gpu-threads 2, and shaders 1792.  280x's the same except shaders 2048.

Oh, and with this version, I can underclock the memory on my 7950's all the way down to 900Mhz with no change in hash rate, which saves a significant amount of power according to my kill-a-watt.  The 280x's wouldn't accept anything but the default memory clock without throwing a fit, however.

Wait a minute, you are getting 600KH on a 7950 @stock? Can you please post all your settings and setup? I am barely getting 550KH @1050/1500. Thanks!

Using Kalroth's cgminer, I'm getting 620 to 650 on both XFX Double D 7950's and Sapphire dual-x 7950's, depending on how finicky a specific card is.  630 seems to be average with stock voltage, core clock 1055, and memory clock at stock (sapphire) or 900Mhz (XFX).

"xintensity" : "4",
"gpu-powertune" : "20",
"gpu-threads" : "2",
"shaders" : "1792",
"gpu-fan" : "0-100",
"auto-fan" : true,
"temp-target" : "70",

Those last 3 lines are important, as the sapphire cards love to auto-throttle if they get too warm.  And my 280x's are even worse.


newbie
Activity: 49
Merit: 0
"quota" : "1;stratum+tcp://amsterdam.middlecoin.com:3333", is the proper syntax.

It's what I use myself anyways. Smiley

Hey it is you! Smiley
Thanks for the response, but the result is the same, copied yours directly and results in: "[16:35:42] Amsterdam slow/down or URL or credentials invalid"
Just updated to the latest build too. What I found curious is if I set all servers to be quota based, after cgminer complains about slow/down it stays like that for a minute and gives a report it can't connect to the servers, but the server name it reports is "http://" that's all, nothing else.
Can it be something in the parsing relies on regional settings or something?
newbie
Activity: 51
Merit: 0
Guys, are you able to get load-balance to work on kalroth cgminer?

Code:
"url" : "amsterdam.middlecoin.com:3333",
totally works, but

Code:
"quota" : "50;amsterdam.middlecoin.com:3333",
gives slow/credentials invalid, this on all servers.
"quota" : "1;stratum+tcp://amsterdam.middlecoin.com:3333", is the proper syntax.

It's what I use myself anyways. :)
full member
Activity: 125
Merit: 100
any news from stratehm.net and when it will be up again?
sr. member
Activity: 518
Merit: 251
I was getting ready to rent rig # 365 by terrahash, when I clicked confirm I got a 404 error... and I can't seem to find the listing for the rig any more.  Any ideas as to what happend?
Wrong forum thread.  I suggest you go to the rig-leasing thread, this one is for Middlecoin.
full member
Activity: 158
Merit: 100
I was getting ready to rent rig # 365 by terrahash, when I clicked confirm I got a 404 error... and I can't seem to find the listing for the rig any more.  Any ideas as to what happend?
newbie
Activity: 49
Merit: 0
Guys, are you able to get load-balance to work on kalroth cgminer?

Code:
"url" : "amsterdam.middlecoin.com:3333",
totally works, but

Code:
"quota" : "50;amsterdam.middlecoin.com:3333",
gives slow/credentials invalid, this on all servers.
full member
Activity: 167
Merit: 100
Glad to see payouts are looking good again today! After mining to a down server for 1/2 the day yesterday. I use GUIminer for my rigs. And yes, I know CGminer is better yadayadayda. Anyone know if there is a way to set up a fall over server in GUIminer? I get a much better ping to the useast server, but would like to have it set to fall over to middlecoin.com if useast is down. Thanks!

I also use guiminer.  To set failover, I just use the extra flags section as follows:
-o stratum+tcp://middlecoin.com:3333 -u youraddresshere -p x

I use another server as my primary as I am not in the US.
I'm sure a second set of -o -u -p right after the first set (useast?) would work for another failover server.
member
Activity: 84
Merit: 10
Please give me Bitcoins so I can buy more food
I don't get it. My accepted hashrate is way-to-low. Mining @1.2mh/s here (cgminer output), but only getting 0.69 mh/s @Middlecoin.



It's your accepted shares, Not really the hash rate, Least that's what I got told.

Yeah, okay, but still. It's pretty low comparing to other pools.

Mine has fallen a fair bit the past few days for some unknown reason

And payout still the same? I will try this weekend, but normally i'd expect something like 1 mh/s at least. Especially with an extra GPU.

No the payout hasn't been as good, But I've had other issues like power cuts etc, So I will have to wait a few days to be able to tell for sure if it's dropped permanently
legendary
Activity: 840
Merit: 1000
I don't get it. My accepted hashrate is way-to-low. Mining @1.2mh/s here (cgminer output), but only getting 0.69 mh/s @Middlecoin.



It's your accepted shares, Not really the hash rate, Least that's what I got told.

Yeah, okay, but still. It's pretty low comparing to other pools.

Mine has fallen a fair bit the past few days for some unknown reason

And payout still the same? I will try this weekend, but normally i'd expect something like 1 mh/s at least. Especially with an extra GPU.
full member
Activity: 140
Merit: 100
Very nice payout for me last night, shame it's flatlined today.
It means nothing. Many a time has it flatlined and gone almost horizontal and then shot up. Basically what I'm saying is, it can look poor in the morning and turn out great, and it can look great in the morning and turn out mediocre/poor Tongue
member
Activity: 84
Merit: 10
Please give me Bitcoins so I can buy more food
I don't get it. My accepted hashrate is way-to-low. Mining @1.2mh/s here (cgminer output), but only getting 0.69 mh/s @Middlecoin.



It's your accepted shares, Not really the hash rate, Least that's what I got told.

Yeah, okay, but still. It's pretty low comparing to other pools.

Mine has fallen a fair bit the past few days for some unknown reason
legendary
Activity: 840
Merit: 1000
I don't get it. My accepted hashrate is way-to-low. Mining @1.2mh/s here (cgminer output), but only getting 0.69 mh/s @Middlecoin.



It's your accepted shares, Not really the hash rate, Least that's what I got told.

Yeah, okay, but still. It's pretty low comparing to other pools.
member
Activity: 84
Merit: 10
Please give me Bitcoins so I can buy more food
I don't get it. My accepted hashrate is way-to-low. Mining @1.2mh/s here (cgminer output), but only getting 0.69 mh/s @Middlecoin.



It's your accepted shares, Not really the hash rate, Least that's what I got told.
member
Activity: 84
Merit: 10
Please give me Bitcoins so I can buy more food
Just want to say , Last payout was great thanks H2o , I also want to say I hate the power company for having so many blackouts after I get my rig running great and good share rates the fucking power cuts!  Angry So if there's anyone here who works at a power station HOPE YOUR EYES FALL OUT! Lol no jokes aside, Hope everyone doing well.

If anybody has a secret sauce setting for getting better share rates please let me know because my rig has been underperforming for days.
legendary
Activity: 840
Merit: 1000
I don't get it. My accepted hashrate is way-to-low. Mining @1.2mh/s here (cgminer output), but only getting 0.69 mh/s @Middlecoin.

sr. member
Activity: 266
Merit: 250
Wow this reject rate is absolutely ridiculous. It's def from the coin switches. We are detecting new blocks literally every 2-3 seconds tonight. wtf.

Please limit those switchest at least by a minute or two, it's a complete waste of accepts.
I disagree as well.  Never profitable to continue a losing trend thinking that you can make up for it.  Probability doesn't work that way.  Switching as is works fine, if you want a pool that does the minimum round time thing look at trademybit, but it's the reason why their profitability is lower
member
Activity: 112
Merit: 10
Is the EU.middlecoin.com server still DOGE-only? Or is it now the same as the other beta servers?
Same as the others now
full member
Activity: 132
Merit: 100
Very nice payout for me last night, shame it's flatlined today.
Jump to: