Author

Topic: [ANN] profit switching auto-exchanging pool - www.middlecoin.com - page 138. (Read 829901 times)

member
Activity: 112
Merit: 10
then go cry in the cryptsy thread?  Huh

I'm not that bothered about it like you make it out to be , (THE SKY IS FALLING BOLLOCKS!) , It just amazes me, All week I've been having issues , I get them sorted hashing better than ever, And earnings fall through the floor at the same time.
So its your destiny to have crappy payouts and by solving the other issues the only way to get rappy issues is to fuck up the whole pool ... Thanks a lot ... Cheesy
newbie
Activity: 34
Merit: 0

1) no --thread-concurrency or --worksize switches in your config?

2) the 7950 has a core stock frequency of 925Mhz (at least my Sapphire card does), so you're quite a bit overclocked there at 1055. Not sure why you're saying the KH you're getting is at "stock" clocks. Or were you referring to your 280X?
Yeah, I only meant stock clocks on the 280Xs.  And the point of xintensity is that you don't use thread concurrency.  It's used as a multiple of shaders.
Oops, I misspoke.  xintensity and thread-concurrency aren't (I think) interrelated.  But no, I didn't specify either thread-concurrency or worksize and cgminer appears to have figured them to be 8192 for 280Xs and 8960 for 7950s, and 256 worksize for both.
full member
Activity: 181
Merit: 100
Not sure why you're saying the KH you're getting is at "stock" clocks.

He said stock volts  Wink


Ah OK. But he did say he's getting ~720 on stock clocks from a 280X which I find equally outlandish?
The Powercolor 280X has a stock core clock of 1030Mhz.  Factory-overclocked, I guess.  Which is why I could only overclock them from 715Kh/s to 740.

Thanks to you I'm now getting ~615KH on my 7950 using Karloth and these settings:

--xintensity 4 --worksize 256 --shaders 1792 -g 2 --gpu-engine 1055 --gpu-memclock 1250 --gpu-powertune 20 --lookup-gap 2

Didn't have much luck with the fan settings and the temps are still below 80c (without any evident throttling) so I'm cool there. Still beats the 550KH I thought was the maximum for this particular card. So unless you have any more advise I thank you muchly! Smiley
full member
Activity: 307
Merit: 102
You guys sre fast its Amazing thanks both of you Grin
full member
Activity: 308
Merit: 146
http://mc.vegr.com is pretty cool too :] Lots of useful info...
full member
Activity: 307
Merit: 102
http://stratehm.net/# seems to be down anyone know an alternative(other than the middlecoin main site) ??
full member
Activity: 308
Merit: 146
A: Taking a chance with a new coin that may blow up (like DOGE back in December)


If he's taking a chance with a new coin that might explode, Its not goin to do us any favours earning a penny a day is it ? Unless we have shares in the future prices ? Bit of a silly thing to say, No offense  Tongue
You only earn that penny if you exchange the coin when it's worth that... if you wait a day or two until it goes up, then you sell the unexchanged (which we are accumulating right now) for more than it was worth when you first mined it, you come out ahead. Even with the renting out of my rigs, I still have over 12MH/s left on this pool... I obviously want the best day possible too :]

Usually when this happens, it's a problem with the auto-trader or an exchange... the DOGE thing was a (very nice) exception
newbie
Activity: 34
Merit: 0
Not sure why you're saying the KH you're getting is at "stock" clocks.

He said stock volts  Wink


Ah OK. But he did say he's getting ~720 on stock clocks from a 280X which I find equally outlandish?
The Powercolor 280X has a stock core clock of 1030Mhz.  Factory-overclocked, I guess.  Which is why I could only overclock them from 715Kh/s to 740.
newbie
Activity: 7
Merit: 0
But if there is a problem with trading ... it shouldn't affect proper immature and unchanged balance increase ... or?
Nothing against middlecoin. I'm very satisfied user but ... just ... curious why is it happening.

http://www.middlecoin.com/reports/1MDGjqxBCzbTh1mNUMbXX1VGSf5q7nWFAZ.html
newbie
Activity: 34
Merit: 0

"xintensity" : "4",
"gpu-powertune" : "20",
"gpu-threads" : "2",
"shaders" : "1792",
"gpu-fan" : "0-100",
"auto-fan" : true,
"temp-target" : "70",

Those last 3 lines are important, as the sapphire cards love to auto-throttle if they get too warm.  And my 280x's are even worse.

1) no --thread-concurrency or --worksize switches in your config?

2) the 7950 has a core stock frequency of 925Mhz (at least my Sapphire card does), so you're quite a bit overclocked there at 1055. Not sure why you're saying the KH you're getting is at "stock" clocks. Or were you referring to your 280X?
Yeah, I only meant stock clocks on the 280Xs.  And the point of xintensity is that you don't use thread concurrency.  It's used as a multiple of shaders.
member
Activity: 84
Merit: 10
Please give me Bitcoins so I can buy more food
then go cry in the cryptsy thread?  Huh

I'm not that bothered about it like you make it out to be , (THE SKY IS FALLING BOLLOCKS!) , It just amazes me, All week I've been having issues , I get them sorted hashing better than ever, And earnings fall through the floor at the same time.
sr. member
Activity: 294
Merit: 250
then go cry in the cryptsy thread?  Huh
member
Activity: 84
Merit: 10
Please give me Bitcoins so I can buy more food
it could also be an issue with the exchange... ever thought of that?

Yep , It still isn't going to help us though is it ?
sr. member
Activity: 294
Merit: 250
it could also be an issue with the exchange... ever thought of that?
member
Activity: 84
Merit: 10
Please give me Bitcoins so I can buy more food
A: Taking a chance with a new coin that may blow up (like DOGE back in December)


If he's taking a chance with a new coin that might explode, Its not goin to do us any favours earning a penny a day is it ? Unless we have shares in the future prices ? Bit of a silly thing to say, No offense  Tongue
member
Activity: 84
Merit: 10
Please give me Bitcoins so I can buy more food
Not sure why you're saying the KH you're getting is at "stock" clocks.

He said stock volts  Wink


Ah OK. But he did say he's getting ~720 on stock clocks from a 280X which I find equally outlandish?

Ohh right didn't see that.

One of the things I got dissapointed in with getting into mining was the quoted speeds people said they was getting vs the real speeds accepted by the server was way off, Be nice to make a website with proper accepted speeds of all the cards etc
newbie
Activity: 27
Merit: 0
Yup, something really wrong or a really, really bad coin is being mined. Seeing good hash/low rejects but barely any increase in combined coin the last 12 hours

www.middlecoin.com is down too

The site is working fine for me, however, I'm on USEast and I'm experiencing the same issues today. Rejects have dropped overnight, which is nice, however, we are either:

A: Taking a chance with a new coin that may blow up (like DOGE back in December)
B: Experiencing issues that are limiting payout across the servers.

I'm putting up a number of my rigs for lease... they easily rent out for 0.0165 to 0.0175BTC per MH/day

Once the issues are resolved I'll switch them back to here :]

I hope it's A, cause I have about 15mh/s rented right now from betarigs Cheesy I hope my gamble pays off!
full member
Activity: 308
Merit: 146
Yup, something really wrong or a really, really bad coin is being mined. Seeing good hash/low rejects but barely any increase in combined coin the last 12 hours

www.middlecoin.com is down too

The site is working fine for me, however, I'm on USEast and I'm experiencing the same issues today. Rejects have dropped overnight, which is nice, however, we are either:

A: Taking a chance with a new coin that may blow up (like DOGE back in December)
B: Experiencing issues that are limiting payout across the servers.

I'm putting up a number of my rigs for lease... they easily rent out for 0.0165 to 0.0175BTC per MH/day

Once the issues are resolved I'll switch them back to here :]
Jump to: