[ANN] profit switching auto-exchanging pool - www.middlecoin.com - page 159.

csf3lih

newbie

Activity: 20

Merit: 0

massive rejections
asia seems also down

fyff

newbie

Activity: 32

Merit: 0

So eu and useast as a failover didn't work out going to be adding a third pool for failover

gsrcrxsi

sr. member

Activity: 294

Merit: 250

Quote from: Ioqua on January 27, 2014, 08:38:23 AM

Teach me for not having three failover pools Roll Eyes

My pool/failovers are:
1. Middlecoin useast
2. Middlecoin uswest
3. Hashcows
4. Poolerino EAC pool

As a result, no cut in to profits. I never even get to pool 3/4. They are there just in case. Also ping is really inconsequential. Blocks aren't found fast enough for an extra 100ms lag to really make much difference.

Furthermore, afaik useast is BETA. Expect 50% uptime and be grateful for more. Along those same lines, uswest is non-beta, so expect 98% uptime and grateful for more.

You have no one to blame but yourself for your high expectations and poor mining practices. If you think you can make more elsewhere (lol), there's the door. Good luck.

JCviggen

hero member

Activity: 1260

Merit: 505

Age Of Mars | GameFI Virtual colonization of Mars

Quote from: artiface on January 27, 2014, 08:38:38 AM

Quote from: MrBobC on January 27, 2014, 08:24:33 AM

Let's say we have lots of rigs and typed our payout address incorrectly for one of them and it now has a balance of 0.2BTC. How would I go about getting this sent to the correct address? 2 of the characters were switched.

You probably don't. If payments were sent to an address you don't control, they will be lost. Bitcoin payments are not reversible.

It's very very very (VERY) unlikely to create a valid address with typos.

That said, typing addresses is a bad idea, always copy/paste.

Catswold

sr. member

Activity: 518

Merit: 251

Send a PM to h2o with all the info. IF it can be corrected, he will do so. It appears that you were lucky and the address to which you directed it is no currently a legitimate BTC address, so the coin remained in your balance.

Oh, and now you know why you should always use copy and paste for your wallet addresses rather than manually typing them in.

MrBobC

member

Activity: 110

Merit: 10

Quote from: artiface on January 27, 2014, 08:38:38 AM

Quote from: MrBobC on January 27, 2014, 08:24:33 AM

Let's say we have lots of rigs and typed our payout address incorrectly for one of them and it now has a balance of 0.2BTC. How would I go about getting this sent to the correct address? 2 of the characters were switched.

You probably don't. If payments were sent to an address you don't control, they will be lost. Bitcoin payments are not reversible.

Yes, but I don't see where a payout actually happened. 1MmBUf6KDTQsNGBEyrsxrTFNCbCT1vtTEK should have been 1MmBUf6DKTQsNGBEyrsxrTFNCbCT1vtTEK. I don't see any payouts for the first one though, just a balance of 0.2.

artiface

full member

Activity: 238

Merit: 100

Quote from: MrBobC on January 27, 2014, 08:24:33 AM

Let's say we have lots of rigs and typed our payout address incorrectly for one of them and it now has a balance of 0.2BTC. How would I go about getting this sent to the correct address? 2 of the characters were switched.

You probably don't. If payments were sent to an address you don't control, they will be lost. Bitcoin payments are not reversible.

Ioqua

full member

Activity: 132

Merit: 100

Teach me for not having three failover pools Roll Eyes

the_unholy_grail

newbie

Activity: 14

Merit: 0

Quote from: gsrcrxsi on January 27, 2014, 08:27:12 AM

Quote from: the_unholy_grail on January 27, 2014, 08:22:05 AM

Why is useast and EU so unstable over the past 24 hours? Really cutting into the profits Undecided

Then set the default uswest server as a backup/failover.

If you're pool mining without multiple failover pools, you're doing it wrong.

I do have multiple failover pools Roll Eyes

but the ping for uswest is too damn high.

gsrcrxsi

sr. member

Activity: 294

Merit: 250

Quote from: the_unholy_grail on January 27, 2014, 08:22:05 AM

Why is useast and EU so unstable over the past 24 hours? Really cutting into the profits Undecided

Then set the default uswest server as a backup/failover.

If you're pool mining without multiple failover pools, you're doing it wrong.

MrBobC

member

Activity: 110

Merit: 10

Let's say we have lots of rigs and typed our payout address incorrectly for one of them and it now has a balance of 0.2BTC. How would I go about getting this sent to the correct address? 2 of the characters were switched.

the_unholy_grail

newbie

Activity: 14

Merit: 0

Why is useast and EU so unstable over the past 24 hours? Really cutting into the profits Undecided

KS

sr. member

Activity: 448

Merit: 250

Quote from: arandy on January 27, 2014, 07:04:49 AM

any advice how to get better numbers?
http://www.middlecoin.com/reports/1NZ3JiWLfvwi7J8AFaYZqYQHGSU7wRB9UW.html

I'm having 5% stales but i see enough people don't having this problem.

Running 4x 7950 cards

My config =
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "30",
"scrypt" : true,
"shares" : "0",
"gpu-threads" : "1",
"gpu-dyninterval" : "7",
"gpu-engine" : "1100,1100,1100,1050",
"gpu-fan" : "60-85,60-85,60-85,60-85",
"gpu-platform" : "0",
"gpu-memclock" : "1500,1500,1500,1450",
"gpu-memdiff" : "0",
"gpu-powertune" : "20,20,20,20",
"gpu-vddc" : "1.081",
"intensity" : "19,20,20,19",
"temp-target" : "78",
"temp-overheat" : "83",
"temp-cutoff" : "86",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "0",
"thread-concurrency" : "21712",
"no-pool-disable" : true

You can also remove the following lines:
"shares" : "0", = will stop submitting shares after an infinite number of shares (i.e. never) = default behavior, so no need for this line.
"gpu-dyninterval" : "7", = used with dynamic intensity. you're using fixed intensity -> not needed.
"gpu-memdiff" : "0", -> works with "auto-gpu" -> does nothing like that + you have specified fixed GPU+RAM speed -> not needed.
"vectors" : "1", -> not used for scrypt mining -> does nothing.
"shaders" : "0", -> overridden by thread-concurrency -> not used.

Catswold

sr. member

Activity: 518

Merit: 251

Right now, your best bet is to just use the default middlecoin.com URL for mining. useast is down and apparently eu is down as well.

cycobilly

newbie

Activity: 3

Merit: 0

Quote from: kirtap on January 27, 2014, 07:43:38 AM

Quote from: Freekje on January 27, 2014, 07:39:43 AM

eu stratum is down ?

i've been having problems with all the stratums so something is going on

yeah, useast looks down too.

arandy

sr. member

Activity: 336

Merit: 250

Quote from: Eastwind on January 27, 2014, 07:28:53 AM

Quote from: arandy on January 27, 2014, 07:04:49 AM

any advice how to get better numbers?
http://www.middlecoin.com/reports/1NZ3JiWLfvwi7J8AFaYZqYQHGSU7wRB9UW.html

I'm having 5% stales but i see enough people don't having this problem.

Running 4x 7950 cards

My config =
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "30",
"scrypt" : true,
"shares" : "0",
"gpu-threads" : "1",
"gpu-dyninterval" : "7",
"gpu-engine" : "1100,1100,1100,1050",
"gpu-fan" : "60-85,60-85,60-85,60-85",
"gpu-platform" : "0",
"gpu-memclock" : "1500,1500,1500,1450",
"gpu-memdiff" : "0",
"gpu-powertune" : "20,20,20,20",
"gpu-vddc" : "1.081",
"intensity" : "19,20,20,19",
"temp-target" : "78",
"temp-overheat" : "83",
"temp-cutoff" : "86",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "0",
"thread-concurrency" : "21712",
"no-pool-disable" : true

Reduce the intensity to 18 and increase TC to 24000.

tnx i'll try that and see what it does

kirtap

newbie

Activity: 4

Merit: 0

Quote from: Freekje on January 27, 2014, 07:39:43 AM

eu stratum is down ?

i've been having problems with all the stratums so something is going on

mpdas108

full member

Activity: 181

Merit: 100

Quote from: Freekje on January 27, 2014, 07:39:43 AM

eu stratum is down ?

Seems to be going on and off recently...

Freekje

full member

Activity: 154

Merit: 100

eu stratum is down ?

Eastwind

hero member

Activity: 896

Merit: 1000

Quote from: arandy on January 27, 2014, 07:04:49 AM

any advice how to get better numbers?
http://www.middlecoin.com/reports/1NZ3JiWLfvwi7J8AFaYZqYQHGSU7wRB9UW.html

I'm having 5% stales but i see enough people don't having this problem.

Running 4x 7950 cards

My config =
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "30",
"scrypt" : true,
"shares" : "0",
"gpu-threads" : "1",
"gpu-dyninterval" : "7",
"gpu-engine" : "1100,1100,1100,1050",
"gpu-fan" : "60-85,60-85,60-85,60-85",
"gpu-platform" : "0",
"gpu-memclock" : "1500,1500,1500,1450",
"gpu-memdiff" : "0",
"gpu-powertune" : "20,20,20,20",
"gpu-vddc" : "1.081",
"intensity" : "19,20,20,19",
"temp-target" : "78",
"temp-overheat" : "83",
"temp-cutoff" : "86",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "0",
"thread-concurrency" : "21712",
"no-pool-disable" : true

Reduce the intensity to 18 and increase TC to 24000.

Topic: [ANN] profit switching auto-exchanging pool - www.middlecoin.com - page 159. (Read 829922 times)