[ANN] Qora | Released 16 May | 100% POS | New Source - page 180.

fsonex

full member

Activity: 168

Merit: 100

Quote from: hughjays77 on June 23, 2014, 06:54:37 PM

Update: Qora opened up finally. 1st I had no connections. Then I closed and could not run again unless I deleted data files again. Qora up and is in sync'ing or so it says. How long does it normally take and will have to keep on deleting data files to open up each time ?

It should sync in a couple minutes.

Regarding the need to delete data files, here's what I've observed...if the wallet is 100% in sync with the network and you exit the client, it shuts down everything correctly. If the wallet is out of sync in any way and you exit, it will throw an error and you will need to delete the data folder to restart.

The client syncs so quickly now this is just a minor issue until the dev get its corrected.

hughjays77

hero member

Activity: 728

Merit: 504

Update: Qora opened up finally. 1st I had no connections. Then I closed and could not run again unless I deleted data files again. Qora up and is in sync'ing or so it says. How long does it normally take and will have to keep on deleting data files to open up each time ?

hughjays77

hero member

Activity: 728

Merit: 504

Qora up & running I think Grin

Than you very much. How do I know the blockchain is updating ?...and how many Qoracoins are actually in circulation ?

Quote from: PilotofBTC on June 23, 2014, 06:27:31 PM

Have you tried deleting the files in the data folder?

PilotofBTC

legendary

Activity: 1736

Merit: 1001

Have you tried deleting the files in the data folder?

hughjays77

hero member

Activity: 728

Merit: 504

Okay here is the error I am receiving when trying to get Qora going. I ran run.bat directly from the cmd line. Hopefully someone can help

C:\Users\Samsung\Desktop\Qora>"C:\Program Files\Java\jre7\bin\java.exe" -Xmx256m
-Djava.library.path=libs/native -jar Qora.jar
Exception in thread "main" java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.jdt.internal.jarinjarloader.JarRsrcLoader.main(Unknown So
urce)
Caused by: java.lang.AssertionError: unknown trans log instruction '0' at log of
fset: 16
at org.mapdb.StoreWAL.verifyLogFile(StoreWAL.java:757)
at org.mapdb.StoreWAL.(StoreWAL.java:66)
at org.mapdb.DBMaker.extendStoreWAL(DBMaker.java:926)
at org.mapdb.DBMaker.makeEngine(DBMaker.java:720)
at org.mapdb.DBMaker.make(DBMaker.java:663)
at b.f.z(Unknown Source)
at a.a.start(Unknown Source)
at Start.main(Unknown Source)
... 5 more

hughjays77

hero member

Activity: 728

Merit: 504

Tried reboot. Tried new batch file. I can see cmd.window with errors for about 1/2 sec. I know the problem is NOT 'no java'. Can someone help me run Qora directly from cmd[dos] so I can post the errors. I will continue to try in the interim

hughjays77

hero member

Activity: 728

Merit: 504

Thanks for the clarification. I changed to the correct path for my 32bit Win 7 system. I also use the " "quotations. Is that correct?. I seemed to get to a 2nd stage where it now asked me for access to my network[ like what happens when you do a fresh altcoin - qt wallet install).

I thought it was going to work from their but still...nothing happens after that Undecided

Quote from: PondSea on June 23, 2014, 05:36:17 PM

My path was for 64 bit make sure you put your local path.

freigeist

hero member

Activity: 1110

Merit: 534

Quote from: hughjays77 on June 23, 2014, 05:18:11 PM

I tried changing the path in the bat file. Didnt work. How do I start with the run command so I can see whats the problem ?

Hello

You should start the bat file from the command line starting it with mouse click
will close the command line window is something is wrong.

Try the following:
1) go to start -> run
2) type cmd into to text box and press enter
3) in the window that opens type
   cd "path to the qory directory" and press enter
   if the directory is on different disk then type D: or the volume name and press enter
   to change the volume in the command line.
4) now when you are in the qora directory type run.bat and press enter

you should see the output in the command line and the window will not close
even if there is any error

I hope you manage.

PondSea

legendary

Activity: 1428

Merit: 1000

My path was for 64 bit make sure you put your local path.

hughjays77

hero member

Activity: 728

Merit: 504

I tried changing the path in the bat file. Didnt work. How do I start with the run command so I can see whats the problem ?

Quote from: Mrrr on June 23, 2014, 04:56:12 PM

Quote from: hughjays77 on June 23, 2014, 04:51:33 PM

I have latest Java, was hitting the qora.jar file before
I hit the run.bat file and the cmd window opened for about 5 secs with some commands executing....then nothing Undecided

Quote from: Mrrr on June 23, 2014, 04:40:11 PM

Quote from: hughjays77 on June 23, 2014, 04:29:52 PM

Downloaded. unzipped. Executed. Nothing happens. Im am Windows 7 starter. First time this happened with a wallet of any sort. Any issues I should be aware of ?

Quote from: qora on June 17, 2014, 03:45:20 PM

txt

And make sure you hit the run.bat rather than the qora.jar. You got to have JAVA installed though

Is it a fresh install? And if yes, try and execute it from run..>cmd (hone the dos skills) so you can take a screenshot of what is going wrong, and post it.

PondSea

legendary

Activity: 1428

Merit: 1000

OMG finally go around to upgrading my wallet from 5 to 9......downloaded the block chain in less than 4 minutes FROM SCRATCH!!!!!! Shocked

Top work Qora

PondSea

legendary

Activity: 1428

Merit: 1000

"C:\Program Files (x86)\Java\jre7\bin\java.exe" -Xmx256m -Djava.library.path=libs/native -jar Qora.jar

Edit the run.bat and put in the full path to the java.

See if that helps.

Mrrr

hero member

Activity: 617

Merit: 528

Quote from: hughjays77 on June 23, 2014, 04:51:33 PM

I have latest Java, was hitting the qora.jar file before
I hit the run.bat file and the cmd window opened for about 5 secs with some commands executing....then nothing Undecided

Quote from: Mrrr on June 23, 2014, 04:40:11 PM

Quote from: hughjays77 on June 23, 2014, 04:29:52 PM

Downloaded. unzipped. Executed. Nothing happens. Im am Windows 7 starter. First time this happened with a wallet of any sort. Any issues I should be aware of ?

Quote from: qora on June 17, 2014, 03:45:20 PM

txt

And make sure you hit the run.bat rather than the qora.jar. You got to have JAVA installed though

Is it a fresh install? And if yes, try and execute it from run..>cmd (hone the dos skills) so you can take a screenshot of what is going wrong, and post it.

Mrrr

hero member

Activity: 617

Merit: 528

Quote from: jztxeno on June 23, 2014, 04:31:11 PM

are you working full time on QORA?

Dev has been working on this for months already before the announcement was made, and he is developing like mad even though he is on his own (according to himself)

. Perhaps he does have a day time job, in which case his schedule would be 8 hours of job, 8 hours of QORA and 8 hours of sleep. I seen 10+ member dev teams on these boards that got less stuff done than this guy. Qora dev is a beast.

hughjays77

hero member

Activity: 728

Merit: 504

I have latest Java, was hitting the qora.jar file before
I hit the run.bat file and the cmd window opened for about 5 secs with some commands executing....then nothing Undecided

Quote from: Mrrr on June 23, 2014, 04:40:11 PM

Quote from: hughjays77 on June 23, 2014, 04:29:52 PM

Downloaded. unzipped. Executed. Nothing happens. Im am Windows 7 starter. First time this happened with a wallet of any sort. Any issues I should be aware of ?

Quote from: qora on June 17, 2014, 03:45:20 PM

txt

And make sure you hit the run.bat rather than the qora.jar. You got to have JAVA installed though

hughjays77

hero member

Activity: 728

Merit: 504

Sker, Just updated to latest Java to be sure. Still nothing happens when I try to execute file.

wizzardTim

legendary

Activity: 1708

Merit: 1000

Reality is stranger than fiction

Qora already flying!!! Thank you dev. Now we have power to vote

Mrrr

hero member

Activity: 617

Merit: 528

Quote from: hughjays77 on June 23, 2014, 04:29:52 PM

Downloaded. unzipped. Executed. Nothing happens. Im am Windows 7 starter. First time this happened with a wallet of any sort. Any issues I should be aware of ?

Quote from: qora on June 17, 2014, 03:45:20 PM

txt

And make sure you hit the run.bat rather than the qora.jar. You got to have JAVA installed though

Mrrr

hero member

Activity: 617

Merit: 528

Quote from: cryptshine on June 23, 2014, 10:32:38 AM

Just a thought...What if we focus on the user friendliness of Qora? As far as I can tell one of the biggest turn off for non crypto people is that you gotta type in some weird numbers to log into your account. Can we think of a secure way for people to log into their wallets with their emails. I know that would make a big difference to a lot of my non crypto friends, interms of user friendliness...

Think that's called 'single point of failure'. Somebody hacks into your email, steals your money. The seed, or 'weird numbers', don't have to be saved in your email, or on your computer. Write them down on a piece of paper, and you're safe. Somebody might hack your email, break into your house or your laptop catches fire: you're safe. And as said, if you're an average user you'll seldomly need the seed to recover your account. It will be mostly us, trying to crash to software on purpose in order to help the dev, who'll need to recover from seed more often.

Skerberus

hero member

Activity: 913

Merit: 664

Quote from: hughjays77 on June 23, 2014, 04:29:52 PM

Downloaded. unzipped. Executed. Nothing happens. Im am Windows 7 starter. First time this happened with a wallet of any sort. Any issues I should be aware of ?

Quote from: qora on June 17, 2014, 03:45:20 PM

Version 9 is now available.

https://mega.co.nz/#!jtIWnYSZ!2LfxcdK2aWaV9rTNH_0H2XwZ_DjwnTLBGz1QP0WLrhE
Please download the application from this post and not from a quote.

MD5: d94f783b73c80a4d24283a7eb4c64ca4
SHA-1: 009756aa1c531c0cfdcd074d55c85109df7dfc46

This version contains the voting system which will be activated on 25 June 5PM GMT.
A new ping network message has been added which will be used in the future to detect closed connections faster.
Also contains some small fixes to the database and network that you probably won't even notice.
This version does not contains the API for the voting system. This will be added in an update before the release.

Not upgrading to this version before 25 June 5PM GMT will make your client fork.

Do you have java installed?

Topic: [ANN] Qora | Released 16 May | 100% POS | New Source - page 180. (Read 748250 times)