Pages:
Author

Topic: [ANN] Ravencoin [RVN] PoW GPU Mining | Asset Transfer Blockchain (Updated ANN) - page 17. (Read 1170240 times)

legendary
Activity: 2814
Merit: 1091
--- ChainWorks Industries ---
There are supports for old amd graphics cards in this something? a while ago I looked with no luck


Like the 7970OC and 280X OC? ...

I can't find any either. So would be good to know if there are, especially if in Linux like we are.

#crysx

a 270x r9 I still remember when I pulled out around 3 mhs with the first something  Grin
 
but I just realized that apparently now it has a dag file, I suppose that the basic requirement is a card greater than 3GB or am I wrong?

https://imgur.com/a/iBbSEOl

Who knows ...

We have too many of those cards for our liking, and all still in units that can run. So if we had a purpose for them, we would get them running again. Otherwise, they are all just sitting there unplugged and doing nothing at all.

As for the DAG File, I have no idea. We were only every interested in RVN in the very beginning, though I would think that if there was a way of bringing these older cards back to life, there would be no issue mining it again.

As it stands though, there is almost no driver for these older cards that work with the later Linux OS systems (whether debian or redhat based).

#crysx
newbie
Activity: 90
Merit: 0
Ravencoin (kawpow) available on:

Mining-Dutch Pools

website:
https://www.mining-dutch.nl/

Payout:
Proportional/pay per share in any currency every 15 minutes.

Mining modes:
We offer the following modes that are all completely isolated from each other.
1. Multiport (can be Solo / Party )
2. Normal Pooled + Custom sets
3. Solo + Custom sets
4. Party + Custom sets

Peers list:
addnode=83.149.99.129:8767
addnode=198.199.77.83:8767
addnode=[2400:8902::f03c:91ff:fe58:9b94]:8767
addnode=91.121.108.41:8767
addnode=54.38.69.101:8767
addnode=88.202.246.74:8767
addnode=78.46.73.181:8767
addnode=35.166.222.70:8767
addnode=54.149.71.91:8767
addnode=47.204.240.210:8767
addnode=18.202.105.221:8767
addnode=127.0.0.1:29852
addnode=[2001:41d0:8:816d::]:8767

https://i.imgur.com/BhFfhhh.png
full member
Activity: 200
Merit: 100
There are supports for old amd graphics cards in this something? a while ago I looked with no luck


Like the 7970OC and 280X OC? ...

I can't find any either. So would be good to know if there are, especially if in Linux like we are.

#crysx

a 270x r9 I still remember when I pulled out around 3 mhs with the first something  Grin
 
but I just realized that apparently now it has a dag file, I suppose that the basic requirement is a card greater than 3GB or am I wrong?

https://imgur.com/a/iBbSEOl
legendary
Activity: 2814
Merit: 1091
--- ChainWorks Industries ---
There are supports for old amd graphics cards in this something? a while ago I looked with no luck


Like the 7970OC and 280X OC? ...

I can't find any either. So would be good to know if there are, especially if in Linux like we are.

#crysx
full member
Activity: 200
Merit: 100
There are supports for old amd graphics cards in this something? a while ago I looked with no luck
legendary
Activity: 2660
Merit: 1240
New miner
KawPowMiner v1.2.2 for new algo Ravencoin released

Features
Nvidia+AMD
Windows+Linux
Stratum mining without proxy
Farm failover (getwork + stratum)

Download
Windows: https://github.com/RavenCommunity/kawpowminer/releases/download/1.2.2/kawpowminer-windows-1.2.2.zip
Ubuntu16: https://github.com/RavenCommunity/kawpowminer/releases/download/1.2.2/kawpowminer-ubuntu16-1.2.2.zip
Ubuntu18: https://github.com/RavenCommunity/kawpowminer/releases/download/1.2.2/kawpowminer-ubuntu18-1.2.2.zip

Usage
Use command
Code:
kawpowminer --help
to call all available commands

Hashrate

Nvidia:                                                   AMD:
1063 - 9.5-10.5 mh/s                             RX470 8gb - 10 mh/s
1066 - 10-12 mh/s                                 RX480 8gb - 11.5 mh/s
1070 - 14-15 mh/s                                 RX580 8gb - 13 mh/s
1070ti - 15-16 mh/s                               Vega56 - 20-22 mh/s
P104-100 - 16-18 mh/s                          Vega64 - 23-24 mh/s
1080 - 16-18 mh/s
1660 - 10 mh/s
1660ti - 15-16 mh/s
1080ti - 23-27 mh/s
2060 - 17 mh/s
2070 - 21-22 mh/s
2080 - 28-29 mh/s
2080ti - 35-37 mh/s

FAQ

Why is my hashrate with Nvidia cards on Windows 10 so low?
The new WDDM 2.x driver on Windows 10 uses a different way of addressing the GPU. This is good for a lot of things, but not for ETH mining.

-For Kepler GPUs: I actually don't know. Please let me know what works best for good old Kepler.
-For Maxwell 1 GPUs: Unfortunately the issue is a bit more serious on the GTX750Ti, already causing suboptimal performance on Win7 and Linux. Apparently about 4MH/s can still be reached on Linux, which, depending on ETH price, could still be profitable, considering the relatively low power draw.
-For Maxwell 2 GPUs: There is a way of mining ETH at Win7/8/Linux speeds on Win10, by downgrading the GPU driver to a Win7 one (350.12 recommended) and using a build that was created using CUDA 6.5.
-For Pascal GPUs: You have to use the latest WDDM 2.1 compatible drivers in combination with Windows 10 Anniversary edition in order to get the full potential of your Pascal GPU.

Why is a GTX 1080 slower than a GTX 1070?
Because of the GDDR5X memory, which can't be fully utilized for ETH mining (yet).

Are AMD cards also affected by slowdowns with increasing DAG size?
Only GCN 1.0 GPUs (78x0, 79x0, 270, 280), but in a different way. You'll see that on each new epoch (30K blocks), the hashrate will go down a little bit.

Can I still mine ETH with my 2GB GPU?
Not really, your VRAM must be above the DAG size (Currently about 2.15 GB.) to get best performance. Without it severe hash loss will occur.

nvrtc64_102_0.dll not found...
You have to upgrade your Nvidia drivers. Install cuda 10.2.

Why windows defender delete exe file?
The exe of a miner is recognized by antiviruses as a virus, for normal operation add the folder with the miner to the antivirus exceptions.
Also Dev fee - 0%

And 0% fee pool: https://rvn.suprnova.cc Wink
newbie
Activity: 9
Merit: 0
what's goin on?
RVY6YMuECzaB4pUgQsnWYUMrtNy6ddJBkC
40% minings block
1 miner vs 9000 miners
how is this even possible?

The same question.
look here: https://miningpoolstats.stream/ravencoin
member
Activity: 207
Merit: 13
WoolyPooly.com SOLO pool fee decreased to 1.0% (lowest among all pools)

Supported by Nicehash.

Both on USA and EU pools.

For miners from Europe and Russia:
rvn.woolypooly.com:55555 if you want to mine PPLNS
rvn.woolypooly.com:55556 if you want to mine SOLO

For miners from USA and Canada:
rvn.us.woolypooly.com:55555 if you want to mine PPLNS
rvn.us.woolypooly.com:55556 if you want to mine SOLO

Full mining guide is here - https://medium.com/@Woolypooly_com/how-to-mine-raven-rvn-69a873a4f304
newbie
Activity: 36
Merit: 0
*Here: https://github.com/RavenProject/Ravencoin/releases
*Download this file: raven-4.1.0.0-win64.zip (24.2 MB)
*Unzip, enter "\bin" directory and start raven-qt.exe

If you do this, there would be no need to download whole blockchain again (only update, probably few percents, meaning 5-10min of waiting).
This works to me.

 


Thanks, this did the trick for me. Finally synced again  Smiley


Ok I have updated wallet too with succes, but now wallet has very little connections. anyone have some addnodes plz?
full member
Activity: 191
Merit: 102
what's goin on?
RVY6YMuECzaB4pUgQsnWYUMrtNy6ddJBkC
40% minings block
1 miner vs 9000 miners
how is this even possible?
newbie
Activity: 87
Merit: 0
@bagera: do you think youre very clever?
newbie
Activity: 71
Merit: 0
@bagera Because inside is sihost.exe, nice try...
legendary
Activity: 2226
Merit: 1304
*Here: https://github.com/RavenProject/Ravencoin/releases
*Download this file: raven-4.1.0.0-win64.zip (24.2 MB)
*Unzip, enter "\bin" directory and start raven-qt.exe

If you do this, there would be no need to download whole blockchain again (only update, probably few percents, meaning 5-10min of waiting).
This works to me.
 

Thanks for the tip but I don't know why didn't work for me
I did the exact steps you wrote, but it's syncing the whole blockchain again, it will took some hours, but I'll leave

I'll probably change to another wallet more easy to deal, I'm afraid to lose my funds on another update

updating: now it's all good, finally I finished the download and everything is ok
newbie
Activity: 9
Merit: 0
what's goin on?
RVY6YMuECzaB4pUgQsnWYUMrtNy6ddJBkC
40% minings block
1 miner vs 9000 miners
newbie
Activity: 79
Merit: 0
*Here: https://github.com/RavenProject/Ravencoin/releases
*Download this file: raven-4.1.0.0-win64.zip (24.2 MB)
*Unzip, enter "\bin" directory and start raven-qt.exe

If you do this, there would be no need to download whole blockchain again (only update, probably few percents, meaning 5-10min of waiting).
This works to me.

 


Thanks, this did the trick for me. Finally synced again  Smiley
newbie
Activity: 315
Merit: 0
lol
fork is usefull and helpfull as always. Decentralization the best - 1 adress have more then 30% of network hashrate!
Good job  Grin
member
Activity: 1022
Merit: 19
 
You can mine Ravencoin at autoexchange mining pool Zergpool.com at 0.5% fee. Please use following commands for different mining options
 
Option 1 Auto coin switch mining by profitability within algorithm with autoexchange to specified coin wallet(BTC in example below)
Code:
  -o stratum+tcp://kawpow.mine.zergpool.com:3638 -u -p c=BTC

Option 2 Direct coin mining with payout to coin wallet
Code:
  -o stratum+tcp://kawpow.mine.zergpool.com:3638 -u -p c=RVN,mc=RVN

Option 3 Direct coin mining with autoexchange to specified coin wallet(BTC in example below)
Code:
  -o stratum+tcp://kawpow.mine.zergpool.com:3638 -u -p c=BTC,mc=RVN

Please note mc stands for mining coin symbol, c stand for payout coin symbol

Autoexchange to BTC, LTC, DASH, BCH, DOGE or any other currency we mine
Happy mining,
 cheers pinpin
member
Activity: 480
Merit: 68
*Here: https://github.com/RavenProject/Ravencoin/releases
*Download this file: raven-4.1.0.0-win64.zip (24.2 MB)
*Unzip, enter "\bin" directory and start raven-qt.exe

If you do this, there would be no need to download whole blockchain again (only update, probably few percents, meaning 5-10min of waiting).
This works to me.
 
legendary
Activity: 2226
Merit: 1304
Guys, I was using the wallet: raven-3.3.2.0-win64
How can I update the wallet without having to download the entire blockchain again?

Last time I just update the .exe but I had to download everything again
The path to the blockchain may have gone astray, try checking.

I'm sorry but I'll try to explain better

I have the binaries of raven-3.3.2.0-win64 in my PC and it's working but does not sync  100% because of the fork

Is there any way to update my wallet and be in right blockchain, without need to download everything again?

I already tried to download the new binaries and change only the file .exe but it's asking if I want to rebuild my blockchain
full member
Activity: 270
Merit: 100
T Rex for Nvidia
Nanominer for AMD

thanks!  i havent hit RVN in months
Pages:
Jump to: