Am I the only one who sees the ridiculousness of these performance improvements with increased power usage?
Sure, the early adopters get an advantage over those who haven't used the new technology yet. In the long run, however, everyone will be using them. This means difficulty goes up, and we're back where we were before, except now with higher energy costs and hotter graphics cards. Less profits for all (except the energy companies)! Hooray!
Topic: [ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner - page 212. (Read 877859 times)
June 27, 2014, 11:59:53 AM
June 27, 2014, 11:34:55 AM
Is there any BAMT Version out with the latest SGMiner V5? Would be nice to Download, still got Problems with 6 GPUs in my Rig and try to change the System to a USB-Linux and SGMiner V5.
use pimp
dö the latest pimp on http://getpimp.org/ and us pimp update ti install the miner.
Many Thanks for the Hint, never heared of Pimp (maybe im not long enough in this Mining
). So after Update i can get this Multi-Algo-Switch SGMiner for NiceHash, right? Will try this soon. 
June 27, 2014, 11:21:24 AM
You just destroyed my brain trying to work out why it was only mining on one card.
It turns out that "devices" command line must now be specified in the pools section. Is there a list somewhere of command line options that you moved to the pools section of the config?
To those finding that marucoin-mod is slower than x13mod, try changing
"gpu-threads" : "1", (set between 1 to 4)
and
"hamsi-expand-big" : "1", (set to 1 or 4, check .bin file reflects this change)
Going from sph-sgminer to sgminer v5, I had to add "hamsi-expand-big" and change threads from 4 to 1. Now they hash at virtually the same. (Marucoin hashrate is truely terrible when threads is on 4).
Check doc/configuration.mdIt turns out that "devices" command line must now be specified in the pools section. Is there a list somewhere of command line options that you moved to the pools section of the config?
To those finding that marucoin-mod is slower than x13mod, try changing
"gpu-threads" : "1", (set between 1 to 4)
and
"hamsi-expand-big" : "1", (set to 1 or 4, check .bin file reflects this change)
Going from sph-sgminer to sgminer v5, I had to add "hamsi-expand-big" and change threads from 4 to 1. Now they hash at virtually the same. (Marucoin hashrate is truely terrible when threads is on 4).
June 27, 2014, 11:00:46 AM
Is there any BAMT Version out with the latest SGMiner V5? Would be nice to Download, still got Problems with 6 GPUs in my Rig and try to change the System to a USB-Linux and SGMiner V5.
use pimp
dö the latest pimp on http://getpimp.org/ and us pimp update ti install the miner.
June 27, 2014, 09:46:06 AM
You just destroyed my brain trying to work out why it was only mining on one card.
It turns out that "devices" command line must now be specified in the pools section. Is there a list somewhere of command line options that you moved to the pools section of the config?
To those finding that marucoin-mod is slower than x13mod, try changing
"gpu-threads" : "1", (set between 1 to 4)
and
"hamsi-expand-big" : "1", (set to 1 or 4, check .bin file reflects this change)
Going from sph-sgminer to sgminer v5, I had to add "hamsi-expand-big" and change threads from 4 to 1. Now they hash at virtually the same. (Marucoin hashrate is truely terrible when threads is on 4).
It turns out that "devices" command line must now be specified in the pools section. Is there a list somewhere of command line options that you moved to the pools section of the config?
To those finding that marucoin-mod is slower than x13mod, try changing
"gpu-threads" : "1", (set between 1 to 4)
and
"hamsi-expand-big" : "1", (set to 1 or 4, check .bin file reflects this change)
Going from sph-sgminer to sgminer v5, I had to add "hamsi-expand-big" and change threads from 4 to 1. Now they hash at virtually the same. (Marucoin hashrate is truely terrible when threads is on 4).
June 27, 2014, 09:04:34 AM
Is there any BAMT Version out with the latest SGMiner V5? Would be nice to Download, still got Problems with 6 GPUs in my Rig and try to change the System to a USB-Linux and SGMiner V5.
June 27, 2014, 08:21:51 AM
For 290X
June 27, 2014, 07:44:10 AM
@aznboy84 is this 32 bit version should it make difference if I try to build 64 bit one.
Got a x64 version too but there's no point, no hashrate difference between x32 and x64
here goes the x64 build
https://mega.co.nz/#!EJVWEK6D!atU0PRIfcKpP9WowkgsJT0GDXctnQPo_CarfCaSWkJ8
June 27, 2014, 04:41:54 AM
Does anyone have a (link to the) manual to compile SGMiner 5 for Ubuntu, because the Nicehash pre-compiled version doesn't show the accepted rate per GPU (A:xx)?
I've only found this one for SPH-SGMiner:
https://forums.chunkypools.com/t/guide-compiling-sgminer-for-x11-coins-in-ubuntu/28
THX
I've only found this one for SPH-SGMiner:
https://forums.chunkypools.com/t/guide-compiling-sgminer-for-x11-coins-in-ubuntu/28
THX
June 27, 2014, 02:36:26 AM
kenshirothefist do you have a 3xxx or 4xxx port up for x15? Another coin is dropping in approximately 4 hours exactly, maiacoin.
EDIT: Look at this laughable bastard.
I sell the X15 GPU miner source code, send me PM.
June 27, 2014, 02:19:00 AM
we need linux gpuminer for x15.and source code
edit: x15 is not yet implemented ... https://github.com/sgminer-dev/sgminer/issues/290
June 27, 2014, 02:06:16 AM
we need x15 sgminer
On it.
https://mega.co.nz/#!XB1mmIyJ!dNJgw9mZeHWe8lyBG3O7zvrL2ph9BAKoKj9cedGKGcc
I didn't make this. --algorithm is bitblock.cl
Happy mining.
we need linux gpuminer for x15.and source code
June 27, 2014, 01:14:45 AM
we need x15 sgminer
On it.
https://mega.co.nz/#!XB1mmIyJ!dNJgw9mZeHWe8lyBG3O7zvrL2ph9BAKoKj9cedGKGcc
I didn't make this. --algorithm is bitblock.cl
Happy mining.
June 27, 2014, 01:05:51 AM
we need x15 sgminer
June 27, 2014, 12:33:12 AM
Cgwatcher is driving me crazy! Why I can't use it with the new miner? It's overiding my settings and creates ckolivas bin instead the darkcoin bin..
Platinum4,
I'm running now your configurations, I need to check it stability on my hardware..
Platinum4,
I'm running now your configurations, I need to check it stability on my hardware..
June 27, 2014, 12:21:59 AM
I wanted to try switching over some of my last remaining GPU rigs from LTC to X11....do I use the same settings as my CGMIner file for scrypt or is it different?
Whoa boy.
So yes, or no?? I'm not talking about the same BAT file, I am talking about TC, intensity, mem/gpu-clock, etc etc
June 26, 2014, 11:17:58 PM
I wanted to try switching over some of my last remaining GPU rigs from LTC to X11....do I use the same settings as my CGMIner file for scrypt or is it different?
June 26, 2014, 11:15:28 PM
June 26, 2014, 06:52:24 PM
I want to mining X11 coins on multipool "x11.greenpool.tk". However, it seems that my sgminer.conf not good. What is wrong?
-method 1 ( miner is: sgminer-5.0-pre-release-2014-06-25-win32, OS WIN8 64 bit,catalyst is 14.4,graphics cards are:ATI 5850.
-method 2 (miner is: sgminer-5.0-pre-release-2014-06-25-win32, OS WIN8 64 bit,catalyst is 13.1,graphics cards are: 1 x SAPPHIRE VAPOR-X 7970 + 2 X MSI 7950 + 1 x SAPPHIRE DUAL-X 7950):
on the first one remove the comma on the last entry, and put one on the entry before it-method 1 ( miner is: sgminer-5.0-pre-release-2014-06-25-win32, OS WIN8 64 bit,catalyst is 14.4,graphics cards are:ATI 5850.
-method 2 (miner is: sgminer-5.0-pre-release-2014-06-25-win32, OS WIN8 64 bit,catalyst is 13.1,graphics cards are: 1 x SAPPHIRE VAPOR-X 7970 + 2 X MSI 7950 + 1 x SAPPHIRE DUAL-X 7950):
on the second change "kernel" to "algorithm"
Second way will not again,rejected 100%. I replaced the "kernel" with "algorithm" :
and run the other one though this site http://jsonlint.com/ its a JSON vaildator, it will tell you where the problem is
edit: you are missing a , at "gpu-threads" : "2"
also change pool-algorithm to just algorithm
June 26, 2014, 06:44:30 PM
I want to mining X11 coins on multipool "x11.greenpool.tk". However, it seems that my sgminer.conf not good. What is wrong?
-method 1 ( miner is: sgminer-5.0-pre-release-2014-06-25-win32, OS WIN8 64 bit,catalyst is 14.4,graphics cards are:ATI 5850.
-method 2 (miner is: sgminer-5.0-pre-release-2014-06-25-win32, OS WIN8 64 bit,catalyst is 13.1,graphics cards are: 1 x SAPPHIRE VAPOR-X 7970 + 2 X MSI 7950 + 1 x SAPPHIRE DUAL-X 7950):
on the first one remove the comma on the last entry, and put one on the entry before it-method 1 ( miner is: sgminer-5.0-pre-release-2014-06-25-win32, OS WIN8 64 bit,catalyst is 14.4,graphics cards are:ATI 5850.
-method 2 (miner is: sgminer-5.0-pre-release-2014-06-25-win32, OS WIN8 64 bit,catalyst is 13.1,graphics cards are: 1 x SAPPHIRE VAPOR-X 7970 + 2 X MSI 7950 + 1 x SAPPHIRE DUAL-X 7950):
on the second change "kernel" to "algorithm"
Second way will not again,rejected 100%. I replaced the "kernel" with "algorithm" :
Jump to: