Topic: [ANN] [SHA256]+[CPU] MediterraneanCoin (MED) - REUSE your ERUPTER!! - page 16. (Read 227779 times)
September 23, 2014, 09:27:43 PM
I have set everything up the old way at least to help out a bit though I am locked out of my ibipot account the email is not being sent to unlock it.
September 23, 2014, 07:11:28 PM
people when you will learn to use Failover strategy and multipool 
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
September 23, 2014, 03:44:45 PM
people when you will learn to use Failover strategy and multipool
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
I would have if I could mine I still cannot get past 15% cpu usage its very strange that it works for everyone else but not me. The only thing that is different is I have to use cgminer to point to bfgminer and this I think is where the problem is for some reason. I have been months without the ability to mine.
mill bro i don't understand
now you mine or not ?
as i understand you found a method for you to load all cpu cores, painful or not if work is OK
i'm angry because diff will drop in half maybe
I havnt been able to mine in months. The method was running 6 ubuntu vm's with 1 asic per vm and 6 bfgminers running on host os. It worked but a miner would drop every 20-30 minutes so I was always restarting them and with my new job I just cannot monitor them so they have been off until I can find a way to get them stable.
now is time to mine, diff maybe will drop again
just for information, i try mcproxy4 and work , but only with med.mine.nu - but this pool not work for me , now - with ibipot i get only rejected
this with bfgminer first generation and mcproxy4
med.mine.nu accept share , but not update confirmed, unconfirmed , round info .,.,.,
September 23, 2014, 03:23:29 PM
people when you will learn to use Failover strategy and multipool
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
I would have if I could mine I still cannot get past 15% cpu usage its very strange that it works for everyone else but not me. The only thing that is different is I have to use cgminer to point to bfgminer and this I think is where the problem is for some reason. I have been months without the ability to mine.
mill bro i don't understand
now you mine or not ?
as i understand you found a method for you to load all cpu cores, painful or not if work is OK
i'm angry because diff will drop in half maybe
I havnt been able to mine in months. The method was running 6 ubuntu vm's with 1 asic per vm and 6 bfgminers running on host os. It worked but a miner would drop every 20-30 minutes so I was always restarting them and with my new job I just cannot monitor them so they have been off until I can find a way to get them stable.
September 23, 2014, 02:06:55 PM
Great
Network difficulty changed to 46.1k
let switch off and 1 left pool and go back to solo mining
Network difficulty changed to 46.1k
let switch off and 1 left pool and go back to solo mining
September 23, 2014, 01:34:37 PM
people when you will learn to use Failover strategy and multipool
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
I would have if I could mine I still cannot get past 15% cpu usage its very strange that it works for everyone else but not me. The only thing that is different is I have to use cgminer to point to bfgminer and this I think is where the problem is for some reason. I have been months without the ability to mine.
mill bro i don't understand
now you mine or not ?
as i understand you found a method for you to load all cpu cores, painful or not if work is OK
i'm angry because diff will drop in half maybe
September 23, 2014, 01:22:49 PM
people when you will learn to use Failover strategy and multipool
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
I would have if I could mine I still cannot get past 15% cpu usage its very strange that it works for everyone else but not me. The only thing that is different is I have to use cgminer to point to bfgminer and this I think is where the problem is for some reason. I have been months without the ability to mine.
September 23, 2014, 01:10:38 PM
people when you will learn to use Failover strategy and multipool
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
http://med.szbpool.net/ is down !
please move you miners to http://ibipot.com
September 23, 2014, 11:47:16 AM
the only way ive been able to max my cpu is running 6 linux vmware each with one asic feeding 6 different bfgminers. And that way needs constant monitoring it's a huge pain.
do you try ever to install ubuntu and then to play with this , not vmware ?
Yeah same result
the same result like windows , and you can't get over 15 Gh from all 6 devices 15Gh each ?
Thats correct
strange
about your method to use all cores
with one linux vmware for core as i understand , this is maybe the best way for now to use maximum of cpu
and from 15Gh normaly, with this method you can mine with 90 Gh on the same configuration?
September 23, 2014, 11:11:38 AM
this is synchronizing forever 
where can i download blockchain?
where can i download blockchain?if you a new for MED - in my signature have link , you can download snapshot of the MED blockchain (2014-09-12)
with "rescan=0" in conf file
EDIT: later will upload fresh snapshot
why is rescaning if there is rascan=0 in conf file?
it should show verifyng blocks.,., load blocks and must start from 12-09-4014 - shortly and create wallet.dat and other folders
do you place on right place/path ?
yes I did. and put my wallet.dat in mediterraneancoin folder
for that i ask you - if you a new member
if you have wallet.dat with MED inside must rescan bro - sorry
this snapshot is fast way to start if you don't have MED address and wallet till now !
there is no way to put your wallet.dat and start fresh blockchain and start just like that.
does this mean I have to wait to synch with my wallet .... i am still at february
do you have MED coins in your wallet.dat ?
-if YES - you must wait to sinc wallet qt with your wallet.dat to have access to them
-if NO - you can start fresh blockchain and you will get new wallet.dat and new MED address , where you can receive coins
fuuuuck....
yes I have MED coinssorry
also i think process it will be faster if you use fresh blockchain and only rescan blocks with your wallet.dat
but the choice is yours
good luck September 23, 2014, 10:43:42 AM
this is synchronizing forever where can i download blockchain?
where can i download blockchain?if you a new for MED - in my signature have link , you can download snapshot of the MED blockchain (2014-09-12)
with "rescan=0" in conf file
EDIT: later will upload fresh snapshot
why is rescaning if there is rascan=0 in conf file?
it should show verifyng blocks.,., load blocks and must start from 12-09-4014 - shortly and create wallet.dat and other folders
do you place on right place/path ?
yes I did. and put my wallet.dat in mediterraneancoin folder
for that i ask you - if you a new member
if you have wallet.dat with MED inside must rescan bro - sorry
this snapshot is fast way to start if you don't have MED address and wallet till now !
there is no way to put your wallet.dat and start fresh blockchain and start just like that.
does this mean I have to wait to synch with my wallet .... i am still at february
do you have MED coins in your wallet.dat ?
-if YES - you must wait to sinc wallet qt with your wallet.dat to have access to them
-if NO - you can start fresh blockchain and you will get new wallet.dat and new MED address , where you can receive coins
fuuuuck....
yes I have MED coins September 23, 2014, 10:38:54 AM
this is synchronizing forever where can i download blockchain?
where can i download blockchain?if you a new for MED - in my signature have link , you can download snapshot of the MED blockchain (2014-09-12)
with "rescan=0" in conf file
EDIT: later will upload fresh snapshot
why is rescaning if there is rascan=0 in conf file?
it should show verifyng blocks.,., load blocks and must start from 12-09-4014 - shortly and create wallet.dat and other folders
do you place on right place/path ?
yes I did. and put my wallet.dat in mediterraneancoin folder
for that i ask you - if you a new member
if you have wallet.dat with MED inside must rescan bro - sorry
this snapshot is fast way to start if you don't have MED address and wallet till now !
there is no way to put your wallet.dat and start fresh blockchain and start just like that.
does this mean I have to wait to synch with my wallet .... i am still at february
do you have MED coins in your wallet.dat ?
-if YES - you must wait to sinc wallet qt with your wallet.dat to have access to them
-if NO - you can start fresh blockchain and you will get new wallet.dat and new MED address , where you can receive coins
September 23, 2014, 10:27:49 AM
this is synchronizing forever where can i download blockchain?
where can i download blockchain?if you a new for MED - in my signature have link , you can download snapshot of the MED blockchain (2014-09-12)
with "rescan=0" in conf file
EDIT: later will upload fresh snapshot
why is rescaning if there is rascan=0 in conf file?
it should show verifyng blocks.,., load blocks and must start from 12-09-4014 - shortly and create wallet.dat and other folders
do you place on right place/path ?
yes I did. and put my wallet.dat in mediterraneancoin folder
for that i ask you - if you a new member
if you have wallet.dat with MED inside must rescan bro - sorry
this snapshot is fast way to start if you don't have MED address and wallet till now !
there is no way to put your wallet.dat and start fresh blockchain and start just like that.
does this mean I have to wait to synch with my wallet .... i am still at february
September 23, 2014, 10:17:00 AM
this is synchronizing forever where can i download blockchain?
where can i download blockchain?if you a new for MED - in my signature have link , you can download snapshot of the MED blockchain (2014-09-12)
with "rescan=0" in conf file
EDIT: later will upload fresh snapshot
why is rescaning if there is rascan=0 in conf file?
it should show verifyng blocks.,., load blocks and must start from 12-09-4014 - shortly and create wallet.dat and other folders
do you place on right place/path ?
yes I did. and put my wallet.dat in mediterraneancoin folder
for that i ask you - if you a new member
if you have wallet.dat with MED inside must rescan bro - sorry
this snapshot is fast way to start if you don't have MED address and wallet till now !
there is no way to put your wallet.dat and start fresh blockchain and start just like that.
September 23, 2014, 10:12:18 AM
this is synchronizing forever where can i download blockchain?
where can i download blockchain?if you a new for MED - in my signature have link , you can download snapshot of the MED blockchain (2014-09-12)
with "rescan=0" in conf file
EDIT: later will upload fresh snapshot
why is rescaning if there is rascan=0 in conf file?
it should show verifyng blocks.,., load blocks and must start from 12-09-4014 - shortly and create wallet.dat and other folders
do you place on right place/path ?
yes I did. and put my wallet.dat in mediterraneancoin folder
ok. removed wallet and it worked fine
September 23, 2014, 10:09:31 AM
this is synchronizing forever where can i download blockchain?
where can i download blockchain?if you a new for MED - in my signature have link , you can download snapshot of the MED blockchain (2014-09-12)
with "rescan=0" in conf file
EDIT: later will upload fresh snapshot
why is rescaning if there is rascan=0 in conf file?
it should show verifyng blocks.,., load blocks and must start from 12-09-4014 - shortly and create wallet.dat and other folders
do you place on right place/path ?
yes I did. and put my wallet.dat in mediterraneancoin folder
September 23, 2014, 10:07:36 AM
this is synchronizing forever where can i download blockchain?
where can i download blockchain?if you a new for MED - in my signature have link , you can download snapshot of the MED blockchain (2014-09-12)
with "rescan=0" in conf file
EDIT: later will upload fresh snapshot
why is rescaning if there is rascan=0 in conf file?
it should show verifyng blocks.,., load blocks and must start from 12-09-4014 - shortly and create wallet.dat and other folders
do you place on right place/path ?
September 23, 2014, 09:57:46 AM
this is synchronizing forever where can i download blockchain?
where can i download blockchain?if you a new for MED - in my signature have link , you can download snapshot of the MED blockchain (2014-09-12)
with "rescan=0" in conf file
EDIT: later will upload fresh snapshot
why is rescaning if there is rascan=0 in conf file?
September 23, 2014, 09:36:53 AM
Quick request, can somebody compile current version of the bfgminer for Windows (preferably 32-bit)? Github has only source... Wanted to try it with rockminer, AFAIK it should be now supported.
Thanks!
Thanks!
i try before time to play with this compilations, but without success
better is to wait DEVs to compile
while you wait, you can still try and mine MED
just use
https://github.com/mrtexaznl/bfgminer/releases/download/v3.10.0.1-med/win32-bfgminer-3.10.0.1.zip
start bfgminer with option: --http-port XXXX
and point your miner to ip:port XXXX , you can use any regular miners soft which support your miners
seems you don't understand what i'm write you
use your bfgminer 4.4 which recognize rockminer, and point to mod bfgminer 3.10 - started with pool:port,worker,pass --http-port XXXX
where XXXX is port,for example 8332
compiled version supported your miner, don't give you better result - only you will not start additional instance of bfgminer
You were right! I didn't understand what you said.
And now I understand that all-in-one MED bfgminer can also work as a proxy, and I re-started it with http option, and started another bfgminer instance (4.4 that recognizes rockminer) with the same user/password, but pointing it to localhost port instead of a pool, and voila, it appeared as PXY0 device in bfgminer 3.10.
Too bad the CPU on that machine is too weak, and immediately got to 100% load with rockminer showing about 3GH/s instead of 32GH/s it does on straight SHA256.
But all is good, at least now I can try rockminer on a different machine and see how it performs there.
Thanks!
September 23, 2014, 09:34:32 AM
this is synchronizing forever where can i download blockchain?
where can i download blockchain?if you a new for MED - in my signature have link , you can download snapshot of the MED blockchain (2014-09-12)
with "rescan=0" in conf file
EDIT: later will upload fresh snapshot
aaa... thanks. not new, just want my coin out of the pool
Jump to: