Topic: [ANN] [SHA256]+[CPU] MediterraneanCoin (MED) - REUSE your ERUPTER!! - page 84. (Read 227779 times)

we have changed the release tag for the latest cgminer, from:

https://github.com/mrtexaznl/cgminer/releases/tag/v3.9.0.1-mcproxy

to

https://github.com/mrtexaznl/cgminer/releases/tag/v3.9.0.2-mcproxy

so to leave room for the first cgminer release.

man are you kidding with us
you want 5 % fee   .,.,.,.,OK
you do not provide any support
your p2pool at this moment is down
here https://github.com/mrtexaznl/p2pool have example
cgminer and bfgminer + mcproxy should work without problems
i'm not 100% sure but inside you connect with port 9375 right
outside other must use port 9374
in your getting start page you use 3333
are you try to use stratum ?
are you know what you doing ?
or no matter work or not
most important tning is to sold some USBs, why you just don't make one e-shop ?
if you have some trouble to setup p2pool contact with DEVs to help you man

this is not PUBLIC pool, private maybe

yes , you forgot to share with us , what type of ASIC you have .,.,.,.,.,.,.

try to add "-S all" at the end of bfgminer line command

Hi everyevery one,
     I've been running the new cgminer on 2 different Computers since it was released yesterday, the new cgminer also has the the Antminer Drivers in it. It seems to run well on the ibipot pool even though the displayed Hashrate in the Pool seems to be much lower than that of the miner. The HW errors are waaay lower with cgminer (ca. 30 p/hr) than with bfgminer (ca. 3,000 p/hr)...but the effective Hasrate remains the same. With bfgminer, the Antminer Hashrate was about 1.2Ghs with an approx. 40% HW error, which gives about a 600Mhs effective Hashrate. With the new cgminer the overall output of the Antminer is further reduced to an average of 700Mhs but...with a lower HW error.  The effective Hashrate of the cgminer works out to be also between 500-600Mhs. There dosen't seem to be any improvement in the effective Hashrate between bfgminer and cgminer, though the miner dosen't work as hard with cgminer (based on the Temp. of the miner).

     My question to the Dev. is, Does the mproxy.jar limit the Hashrate of the miners or does the CPU power? I have been running 2 mining rigs that are exactly the same (3x Antminer U1(overvolted/oc'd to 2.4ghs) Digitus 7 port powered USB Hub, Fan cooled) on 2 vastly different Laptops and the mining Hahsrates are the same. The 1st is an ASUS 12ee something Netbook with an i3 Processor and the 2nd is a Toshiba Qosmio with an i7 Processor. They both hash at the identical rate. The Processor in the i3 is running at ca. 85% and the i7 is running at ca. 20%. I can run
1 Antminer or all 3 and the effective Hashrate stays the same (ca. 600Mhs per unit). One would think that if the mining power was limited by computational power then by having fewer Antminers pluged in they would run at a higer Hashrate up to the computational limit imposed by the CPU. In theory it looks like my i3 Processor could run about 2Ghs before the CPU limiter kicks in...therefore...I should be able to hit that limit with just 1 Antminer at 2.4Ghs and not 4 at 600Mhs. Is there some code in the mproxy.jar that limits the Hashrate of each miner?
    
     What kind if Hashrates are some of you other Guys getting per Antminer or even a normal 333Mhs Block eruptor? If the Hashrate is running at the 333Mhs limit on a normal BE and only 600Mhs on an Antminer then the BE's are way more economical than an Antminer. I could buy 4 or 5 BE's for the price of 1 Antminer and have the sme Hashrate.

WTB MED, Please post offers, and reasons why you think its a fair offer

i bought 2699 med  from poplolnman  on 2014/2/6 ,thx for u.

0.000025BTC = 1MED

You should try p2pool 

http://med.u2pool.com:3333/

Hmm yes but no devices then
Maybe i forget something?

installed all of these .exe,but still unable run stratum-mining-proxy?

I downloaded "stratum-mining-proxy-master" documents from github,but dont which file can run the proxy

bfgminer work not bad on my computer,but have 40% HW,wanna try cgminer see if it will be better

M then the butten shift and the butten +

Some people can help me please ? I download bfgminer second generation
And i would like to mine in the pool Ibipot
So i create a .bat in the bfgminer folder like this

bfgminer -o http://ibipot.com:3333 -u username.workername -p 123

And when i start bfgminer its write NO DEVICES FOUND Press M to add

 

Successfully sold 2k MED to XiaoRui at 0.000045 BTC each

5% fees no problem I will give him if it's work as should be

but I can't check how it's work , because of that I ask for other opinion
work or not? owner ?

5% fee for a P2Pool?? Can I get a hell to the no

No one try p2pool , to report how its work ?

Yesss....Thank You...

https://github.com/mrtexaznl/cgminer/releases/tag/v3.9.0.2-mcproxy

second generation Cgminer with integrated mcproxy functionalities, tested for stratum protocol.

win32 build: https://github.com/mrtexaznl/cgminer/releases/download/v3.9.0.2-mcproxy/win32-cgminer.zip


antivirus scan results:
https://www.virustotal.com/en/url/89acd1c41d6a95e0eb5803c8481a77d94beeb5a2e75a3c9b4dc18bb3aa818644/analysis/1391701737/

hey,I like MED.Can you give me a little to test the wallet.
Mf1ZJYNKEe59uFCeTUFgFWqGPwHHkcBrD4
thanks!

ieeeeeee "SUPER"       I have 1 (one) Accepted
with this configuration i can mine, solo and + stratum and pool mining
are you sure everething is OK with p2pool

 bfgminer version 3.9.0 - Started: [2014-02-06 16:31:44] - [  0 days 01:01:43]

 Connected to localhost diff 0 without LP as user MmvSpwdPvhyJH2v6iNUHj4QuFAzVZL
 Block: (null)  Diff: ()  Started:
 ST:0  F:1  NB:0  AS:0  BW:[168/126 B/s]  E:0.00  I: 0.00 BTC/hr  BS:8
 1            |  0.00/15.09/ 1.16Mh/s | A:1 R:14+0(100%) HW:6/ 29%
--------------------------------------------------------------------------------
 PXY 0:       | 138.9/15.09/ 1.16Mh/s | A:1 R:14+0(100%) HW:6/ 29%
--------------------------------------------------------------------------------
 [2014-02-06 16:31:52] Pool 0 not providing work fast enough
 [2014-02-06 16:32:00] Rejected 1ff2fdb6 PXY 0  Diff 8/0
 [2014-02-06 16:32:31] Rejected b06c6bd2 PXY 0  Diff 1/0
 [2014-02-06 16:32:45] Rejected c02416db PXY 0  Diff 1/0
 [2014-02-06 16:32:47] Rejected 56fa8f85 PXY 0  Diff 2/0
 [2014-02-06 16:37:07] Rejected 255ebacd PXY 0  Diff 6/0
 [2014-02-06 16:37:19] Rejected 3840240b PXY 0  Diff 4/0
 [2014-02-06 16:47:43] Rejected e356ceb6 PXY 0  Diff 1/0
 [2014-02-06 16:50:16] Rejected cf79cfd2 PXY 0  Diff 1/0
 [2014-02-06 16:52:39] Accepted 6ffba6cc PXY 0  Diff 2/0
 [2014-02-06 16:52:41] Rejected 731cadeb PXY 0  Diff 2/0
 [2014-02-06 16:52:47] Rejected 54493954 PXY 0  Diff 3/0
 [2014-02-06 16:52:50] Rejected 9e1fc23e PXY 0  Diff 1/0
 [2014-02-06 17:00:44] Rejected 9ebcaa73 PXY 0  Diff 1/0
 [2014-02-06 17:00:44] Rejected 6e067eed PXY 0  Diff 2/0
 [2014-02-06 17:00:44] Rejected 50a7a8a6 PXY 0  Diff 3/0[/s][/s]