Topic: [ANN] SilkCoin | New Wallet | NOW on MintPal / Cryptsy | FULL POS - page 295. (Read 332125 times)
May 14, 2014, 09:03:46 AM
Any news from mintpal?
May 14, 2014, 08:39:16 AM
the proof of stake works very well...not like yellowcoin and so on..
great work devs..this awesome wallet is like a wallet of Armani
and other coins like a wallet from walmart
great work devs..this awesome wallet is like a wallet of Armani
and other coins like a wallet from walmart 
May 14, 2014, 08:17:49 AM
Yes we just saw that tweet, will update OP with new nodes very soon sorry about that!
thanks a lot
cheers 
May 14, 2014, 08:17:36 AM
Anyone able to share there cgminer config for a R9 280x ? Finding it very buggy and I at 11 to stop HW errors etc..
Hey, not sure about 280x but my 290 this is what I use:
--thread-concurrency 24550 -w 512 -I 20
I get about 840khs with this, and without the powertune and such, the fan stays quiet and the card stays pretty cool.
May 14, 2014, 08:14:35 AM
Yes we just saw that tweet, will update OP with new nodes very soon sorry about that!
May 14, 2014, 08:13:39 AM
Just wanted to say thanks to the dev team, coin off to a good start and orders being eaten up on Bittrex
Now that the first POW stage is over do we want to have a second look at the algo used for the second stage? I know there was a fair amount of discussion over using Scrypt, X11 or Groestl. Is it possible to implement an algo change for the second stage dev? X11 does seem to be the flavour of choice at the moment, but I think a change to Groestl may help Silkcoin stand out even more than it does already.
Now that the first POW stage is over do we want to have a second look at the algo used for the second stage? I know there was a fair amount of discussion over using Scrypt, X11 or Groestl. Is it possible to implement an algo change for the second stage dev? X11 does seem to be the flavour of choice at the moment, but I think a change to Groestl may help Silkcoin stand out even more than it does already.
We thought about that for a long time, but you know for us , POW phase is not that important, what matters is the POS phase.
But we needed the POW phase to avoid an IPO, and the fact that multipools and big farms mine this coin is not that bad since it's all redistributed through exchanges at low prices.
Yes the price will suffer during POW phases but as stated our objective is the POS phase. And even with scrypt, because coins being massively sold, we are getting a good distribution just look at the volume of Silkcoins traded per 24 hours since POW started-.
Remember both phases are 5-6 days mining, even if there is a lot of dump during these periods as long as there are believers and people to buy back from them we'll be okay, as will distribution.
Anyway this is just my point of view, the subject is not closed feel free to speak your mind, but also we'd really want to avoid a change like this, it's really not good for the coin, if we wanted X11 we should've launched it with X11 but changing now feels a bit wrong.
Please tell us what you think about this matter. We have about 20 days before next POW
.Can you share more nodes ? My wallet can't sync and some of my chinese friends meet the same problem, thanks.
May 14, 2014, 08:05:14 AM
Just wanted to say thanks to the dev team, coin off to a good start and orders being eaten up on Bittrex
Now that the first POW stage is over do we want to have a second look at the algo used for the second stage? I know there was a fair amount of discussion over using Scrypt, X11 or Groestl. Is it possible to implement an algo change for the second stage dev? X11 does seem to be the flavour of choice at the moment, but I think a change to Groestl may help Silkcoin stand out even more than it does already.
Now that the first POW stage is over do we want to have a second look at the algo used for the second stage? I know there was a fair amount of discussion over using Scrypt, X11 or Groestl. Is it possible to implement an algo change for the second stage dev? X11 does seem to be the flavour of choice at the moment, but I think a change to Groestl may help Silkcoin stand out even more than it does already.
We thought about that for a long time, but you know for us , POW phase is not that important, what matters is the POS phase.
But we needed the POW phase to avoid an IPO, and the fact that multipools and big farms mine this coin is not that bad since it's all redistributed through exchanges at low prices.
Yes the price will suffer during POW phases but as stated our objective is the POS phase. And even with scrypt, because coins being massively sold, we are getting a good distribution just look at the volume of Silkcoins traded per 24 hours since POW started-.
Remember both phases are 5-6 days mining, even if there is a lot of dump during these periods as long as there are believers and people to buy back from them we'll be okay, as will distribution.
Anyway this is just my point of view, the subject is not closed feel free to speak your mind, but also we'd really want to avoid a change like this, it's really not good for the coin, if we wanted X11 we should've launched it with X11 but changing now feels a bit wrong.
Please tell us what you think about this matter. We have about 20 days before next POW
. May 14, 2014, 06:40:40 AM
m8 why all my silk coin go to "stake: " i can't use this coin, how can i do?
Go to Settings... Options
than add the amount of coins to the 'reserve' box that you DO NOT want to stake with, this will prevent them staking and allow you instant access to them
Yes, the wallet is this much cool...
Honestly, if i wasnt this poor, i'd send a donation to dev for they work. But comon, me first = )
May 14, 2014, 06:33:11 AM
m8 why all my silk coin go to "stake: " i can't use this coin, how can i do?
Go to Settings... Options
than add the amount of coins to the 'reserve' box that you DO NOT want to stake with, this will prevent them staking and allow you instant access to them
May 14, 2014, 05:23:50 AM
Anyone able to share there cgminer config for a R9 280x ? Finding it very buggy and I at 11 to stop HW errors etc..
"intensity" : "13",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "2048",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"gpu-engine" : "1030",
"gpu-memclock" : "1500",
"gpu-powertune" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin"
I get 705Kh/s
May 14, 2014, 04:33:17 AM
Anyone able to share there cgminer config for a R9 280x ? Finding it very buggy and I at 11 to stop HW errors etc..
Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer --scrypt -I 13 -o URL -u Gambiman.1 -p x --auto-fan --temp-target 65 --temp-overheat 80 --thread-concurrency 11200 -w 256 -g 2 --gpu-engine 1025 --gpu-memclock 1500 --gpu-powertune -20 -E 1 --scan-time 1 -Q 0 --lookup-gap 2
setx GPU_USE_SYNC_OBJECTS 1
cgminer --scrypt -I 13 -o URL -u Gambiman.1 -p x --auto-fan --temp-target 65 --temp-overheat 80 --thread-concurrency 11200 -w 256 -g 2 --gpu-engine 1025 --gpu-memclock 1500 --gpu-powertune -20 -E 1 --scan-time 1 -Q 0 --lookup-gap 2
Mining at 700+Kh/s. temp steady 65, no HW
May 14, 2014, 04:28:30 AM
m8 why all my silk coin go to "stake: " i can't use this coin, how can i do?
This is POS.
It´s ¨mining¨ for You coins cuz You are keeping them in Your wallet. This is like reward for this. (It´s not using Your CPU or GPU)
You will be able to use them in few hours.
May 14, 2014, 04:16:12 AM
m8 why all my silk coin go to "stake: " i can't use this coin, how can i do?
May 14, 2014, 03:21:00 AM
wallet working fine here
May 14, 2014, 03:14:09 AM
Awesome wallet! Got some SC to test out staking.. looks good.. =D
Want to buy more but out of BTC =(
Want to buy more but out of BTC =(
May 14, 2014, 03:11:48 AM
what pool will allow me to mine with 100mh
Why should one not allow ?? You're welcome on all suprnova pools for sure
May 14, 2014, 03:09:46 AM
what pool will allow me to mine with 100mh
May 14, 2014, 03:08:55 AM
I've stopped Suprnova's Stratum and will restart it in 30 days.
Why not mine WildWestCoin @ https://ww.suprnova.cc while waiting ?
Why not mine WildWestCoin @ https://ww.suprnova.cc while waiting ?
May 14, 2014, 03:03:39 AM
Sell orders are getting eaten up on bittrex.
May 14, 2014, 02:01:48 AM
Anyone able to share there cgminer config for a R9 280x ? Finding it very buggy and I at 11 to stop HW errors etc..
Jump to: