Topic: [ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 50. (Read 515718 times)

I was using prettyhatemachine branch.

Regardless I am getting the same link error on DJstone and same 0h/s GPU reported as sick after a while...

what is the best rate on darkcoin should I get on 7950? mine is 1.8 Mh/s

sounds like the kernel path is messed up or something

Edit: also it defaults to thread-congurency 6016
So maybe try setting it manually to something lower will help

Hello, yesterday I migrate from BAMT 1.1 to BAMT 1.6 to try Darkcoin mining. Configure my BAMT like before - i had enough experience with Linux and mining but have trouble start mining Darkcoin. With default cgminer there are no problems at all - it mines like in older version, but when change the bamt.conf to sgminer-sph i get:

Started sgminer 4.1.0-85-gccc7d
Loaded configuration file /etc/bamt/sgminer-sph.conf
Kernel darkcoin is experimental.
Error -11: Building Program (clBuildProgram)
Error compiling program for search.
Frontend phase failed compilation.
Error: Creating kernel search failed!

Failed to init GPU thread 0, disabling device 0
Restarting the GPU from the menu will not fix this.
Try restarting sgminer.

In "sgminer-sph.conf" i change only the pool/worker data. In bamt.conf - stop cgminer with "#cgminer_opts: --api-listen --config /etc/bamt/cgminer.conf", and set: cgminer_opts: --api-listen --config /etc/bamt/sgminer-sph.conf miner-sgminer-sph: 1

I read in here:
"Error -11: Building Program (clBuildProgram) - execute miner from the directory where "kernel" directory is present"
and start mining process from the console with:

export DISPLAY=:0
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
./sgminer --kernel darkcoin -o stratum+tcp://stratum1.suchpool.pw:3335 -u xxxxx.1 -p xxxx

with no options just to check if the mining process will start at any kH/s. The console returns:
Started sgminer 4.1.0-85-gccc7d
Kernel darkcoin is experimental.Killed

It takes about 1 or 2 minutes between start and error (kill) of the mining process.

Where can i find a solution of my problem, thanks in advance.
I mine with one HD6950.

ehhh? i don't know what you did but if you want to compile with working qubitcoin, and quarkcoin try using the one from here
https://github.com/DJstone/sph-sgminer
no mod needed just compile and go

I have Added this software to my Windows GUI Mining software so it will Mine when my PC is IDLE only or i can mine 24/7 without having any windows POP up, give it a look
http://i2.wp.com/www.reviewoutlaw.com/wp-content/uploads/2014/01/darkcoin_logo-300x300.png?resize=150%2C150

If anyone is looking for a nice How to Guide on Mining DarkCoin, either with a CPU or GPU then check this nice Step by Step Guide out...

http://www.reviewoutlaw.com/how-to-mine-darkcoin-gui-friendly-simple-way-mining-dark-coin/

Anybody have luck on Mac?

I compiled on Mac after making quarkhash, xhash and quash "static inline" instead of just inline and it does start but after a while GPU get's sick and I don't see any hashes... Tried all of them kernels - same result with exception of scrypt. Any ideas what I might be missing?

never got that error but maybe you put the pool address in wrong
or did you get that error while building

Does anybody know why i would be getting "getaddrinfo () in setup stratum () returned -11: system error "? I have complied sph from github, thanks

Feeleep, I don't know what you did with stratum 6021... but I have 2x 7870's that usually get amazing results on p2pool sites... and I'm getting crap on yours.

I was only getting 2MH/s out of it... and I get a much higher reading than that usually, because sgminer doesn't report the (corrected) hash-rate for the quark algo on the gpu's... at least not to my knowledge.

phm... quarkcoin algo is still having major problems on every gui pool, except for feeleep's, who has implemented a special stratum... but has very low-end results for miners.

p2pool setups work fine... but gui pools don't work... or read false positives.

14.2 drivers are not the best...
get 13.1 or 13.2

I'm calling the miner with
sgminer -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3335 -u aaa -p aaa -I 16 --gpu-engine 860 --gpu-memclock 1200 -g 2 -w 256
No HW and no rejects after hours of work.

I tried many other settings combinations but none of them made a difference, I removed them from my .bat for simplicity (only on x11 they didnt make a difference for me so far, on scrypt they used to), also no .conf file with default settings, just using the .bat file

I'm on the catalyst beta drivers 14.2, win 7 x64, sph-sgminer binary compiled by badman

Don't know the card manufacturer since i'm administering the miner remotely, I got the clocks from a monitoring software (gpu-z)

my 6850 1G,default tc=6016
sgminer -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3335 -I 11 --thread-concurrency 6144
sgminer 4.1.0 - Started: [2014-03-16 16:06:18]
----------------------------------------------------------------------------
(5s):589.6K (avg):581.8Kh/s | A:15  R:0  HW:0  WU:0.008/m
ST: 1  SS: 0  NB: 740  LW: 122290  GF: 0  RF: 0
Connected to Pool 0 (stratum) diff 0.008 as user lengx7.user1
Block: 8baa90eb...  Diff:439  Started: [23:33:48]  Best share: 16
----------------------------------------------------------------------------
[P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:  53.0C 3384RPM | 588.9K/581.8Kh/s | R:  0.2% HW:0 WU:0.008/m I:11
----------------------------------------------------------------------------
[23:31:48] Network diff set to 375
[23:31:48] Stratum from Pool 0 detected new block
[23:32:13] Accepted 1d536f64 Diff 0.034/0.008 GPU 0
[23:32:18] Network diff set to 385
[23:32:18] Stratum from Pool 0 detected new block
[23:32:39] Accepted 52b4163b Diff 0.012/0.008 GPU 0
[23:32:48] Network diff set to 394
[23:32:48] Stratum from Pool 0 detected new block
[23:33:48] Network diff set to 439





-.- but 7850 1G,default tc=6016,,,,HW HW HW...
sgminer 4.1.0 - Started: [2014-03-18 11:55:10]
--------------------------------------------------------------------------------
(5s):3.633M (avg):4.572Mh/s | A:0  R:0  HW:7  WU:0.000/m
ST: 2  SS: 0  NB: 1  LW: 44  GF: 0  RF: 0
Connected to Pool 0 (stratum) diff 0.004 as user lengx7.user2
Block: 3b6f6ee6...  Diff:376  Started: [11:55:10]  Best share: 0
--------------------------------------------------------------------------------
[P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU  0:  42.0C 3979RPM | 839.7K/1.113Mh/s | R:  0.0% HW:1 WU:0.000/m I:18
 GPU  1:  40.0C 3948RPM | 831.9K/1.078Mh/s | R:  0.0% HW:2 WU:0.000/m I:18
 GPU  2:  40.0C 3717RPM | 852.8K/1.113Mh/s | R:  0.0% HW:1 WU:0.000/m I:18
 GPU  3:  38.0C 3744RPM | 856.1K/1.113Mh/s | R:  0.0% HW:2 WU:0.000/m I:18
 GPU  4:  39.0C 3755RPM | 860.0K/1.130Mh/s | R:  0.0% HW:3 WU:0.000/m I:18
--------------------------------------------------------------------------------
[11:55:07] Kernel darkcoin is experimental.
[11:55:08] Kernel darkcoin is experimental.
[11:55:08] Kernel darkcoin is experimental.
[11:55:08] Kernel darkcoin is experimental.
[11:55:08] Kernel darkcoin is experimental.
[11:55:08] Kernel darkcoin is experimental.
[11:55:08] Kernel darkcoin is experimental.
[11:55:08] Probing for an alive pool
[11:55:09] Pool 0 difficulty changed to 0.004
[11:55:10] Network diff set to 376

o.O
see above on this page.....
https://bitcointalksearch.org/topic/m.5736704

also 2 6850 and 2 7750
sgminer.exe --gpu-engine 900,900,950,950 --gpu-memclock 1000,1000,1400,1400 -I 16,16,14,14 -g 2 -w 256 --thread-concurrency 3200  --lookup-gap 2 -c dark.conf (<--only pools in here anything else crashes the computer for some reason)
gets about 800kh/s and 350kh/s

I ask what your settings are?
ASUS 7850 1G
Win7 X64, 4G memory, AMD_Catalyst_13.1
Settings:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3335 -u lengx7.user2 -p x --gpu-fan 70 --gpu-engine 1000 --gpu-memclock 1100 --worksize 256 --lookup-gap 2 --thread-concurrency 6016 -g 2 --intensity 13
sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3335 -u lengx7.user2 -p x --gpu-fan 70 --gpu-engine 1000 --gpu-memclock 1100 --intensity 11
sgminer.exe -k darkcoin -o stratum+tcp://stratum1.suchpool.pw:3335 -u lengx7.user2 -p x --gpu-fan 70 --gpu-engine 1000 --gpu-memclock 1100 --intensity 11 --thread-concurrency 8192
The results are all wrong HW

clock settings are a major factor

What phm-sgminer settings are you guys finding to be most relevant for the darkcoin kernel? Here with a 7850 the only setting changing my hashrate noticeable is the intensity -I. Other than that using something other than -g 2 seem to very slightly impact negatively the hashrate, but thread-concurrency for instance is making no changes at all...

For the record, i'm getting 910kh/s for -k darkcoin with the 7850 (standard bios and clocks), which seem fine in comparison to the reported rates in the DRK thread, but I would like to know if anyone find a setting to be of relevance.

i appreciate your fast reply
but a gpu miner just came out

sorry for the inconvenience
i send you some btc

best regards

ok i did the compile but it seems to want to drive my memclock to 150 and doesn't put out any hashes
then again they said it really only works with certain video cards....
https://mega.co.nz/#!DUAnHKRY!T8YYVSTHOO1fQdpQNvJEhOS-500l8RIy_BRWlbN9nkM

edit: dont go over 6 on intesity

Ok finally its done   ...