[ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 57.

badman74

hero member

Activity: 658

Merit: 500

Quote from: dureiken on March 09, 2014, 04:20:52 PM

Hi

thanks for your miner.

I have 2*290x watercooled and I would like to know if you could solve the problem that I have to launch sgminer with --no-adl option to work.

It has been fixed in cgminer from kalroth.

Thanks a lot.

what do you mean? if you use --no-adl it does what it is supposed to do....
are you saying that you have to use --no-adl for it to work? lack of fan causing issues?

dureiken

newbie

Activity: 4

Merit: 0

Hi

thanks for your miner.

I have 2*290x watercooled and I would like to know if you could solve the problem that I have to launch sgminer with --no-adl option to work.

It has been fixed in cgminer from kalroth.

Thanks a lot.

IL MinaTore

full member

Activity: 218

Merit: 100

and very difficult to change and set up well for the program in order to provide the right information to work for all the pool, I think that the program is already far more forward and it is only a small modification to fit because nobody else does?

badman74

hero member

Activity: 658

Merit: 500

Quote from: feeleep on March 09, 2014, 06:41:11 AM

Quote from: badman74 on March 07, 2014, 05:06:51 PM

Quote from: gizzig on March 07, 2014, 05:03:01 PM

Since yesterday I have the problem in MPOS pools

100% : "share is above target"

but it was working well and I have not changed anything

Help, please

a lot of the mpos cpu pools have been fixing there pool so that gpu miners cant mine there

Hi - I am the owner of coinmine.pl pools and most probably sgminer has wrong settings coded for diff1 - this software is just spamming pools with incorrect shares and thats why most of them are rejected. Please fix it because stratum servers are set up correctly.

EDIT: or it just interpret share difficulty set by stratum differently than cpuminers... for example for quark based coins I have to set up stratum share diff as 1/256

feeleep

really? as long as i can get a pool to give me a diff above .01 everything seems to work fine...
not saying you are wrong, as i don't know enough about the code to fix it, but it seems the massive amount of shares it tries to process at low diff causes massive HW faults and this is probably why it gives bad shares
i would make an attempt at fixing this but i don't really know where to start

vaskomobile

newbie

Activity: 52

Merit: 0

Hello

Same output from miner you get if you using wrong kernel e.g scrypt for nscupt . try to specify it with -K scrypt

feeleep

legendary

Activity: 1197

Merit: 1000

Quote from: badman74 on March 07, 2014, 05:06:51 PM

Quote from: gizzig on March 07, 2014, 05:03:01 PM

Since yesterday I have the problem in MPOS pools

100% : "share is above target"

but it was working well and I have not changed anything

Help, please

a lot of the mpos cpu pools have been fixing there pool so that gpu miners cant mine there

Hi - I am the owner of coinmine.pl pools and most probably sgminer has wrong settings coded for diff1 - this software is just spamming pools with incorrect shares and thats why most of them are rejected. Please fix it because stratum servers are set up correctly.

EDIT: or it just interpret share difficulty set by stratum differently than cpuminers... for example for quark based coins I have to set up stratum share diff as 1/256

feeleep

badman74

hero member

Activity: 658

Merit: 500

Quote from: Burninj on March 08, 2014, 07:12:01 PM

Anyway to have heavycoin added so we can rape the ass of this scamcoin?

i wish i had the skills to add new algo's to it but the only programming language i ever really learned was basic...
back when my computer didnt even have a hard drive and floppy disks were actually floppy

edit: if it was just inserting the files and adding the references in the right spots i might have been able
but there is no available heavycoin.cl, so it would need to be written from scratch

Burninj

legendary

Activity: 1148

Merit: 1000

Anyway to have heavycoin added so we can rape the ass of this scamcoin?

badman74

hero member

Activity: 658

Merit: 500

Quote from: qwep on March 08, 2014, 05:43:18 PM

Guys help on a pool shows speed but does not have a solution, and there is no reward

will need more info to say anything for sure but at the rate you are working it looks like it will take 10 min to get 1 full share as you are mining at .1/min
what this amounts to coin wise may vary greatly
also it appears you are using one of the older compiles

qwep

legendary

Activity: 1008

Merit: 1000

Guys help on a pool shows speed but does not have a solution, and there is no reward

billotronic

legendary

Activity: 1610

Merit: 1000

Crackpot Idealist

I would not be a bit surprised if its in the next update

Speedie

sr. member

Activity: 504

Merit: 254

Quote from: willapl on March 08, 2014, 09:58:18 AM

Any GPU miner for HeavyCoin?

Also interested. From a quick look over the hefty1 algo and heavy.c file in the HeavyCoin CPU miner it doesn't seem as though it would be too bad to integrate. Most of the required algos are already in SPH-Miner. Unfortunately my C skills have long since rusted away to almost nothing.

willapl

newbie

Activity: 40

Merit: 0

Any GPU miner for HeavyCoin?

sippsnapp

sr. member

Activity: 322

Merit: 250

Cant get sgminer running darkcoin on win 7 x64 - 9800gtx+ gpu

scrypt works, just darkcoin keeps crashing the sgminer.

ilic

hero member

Activity: 535

Merit: 502

guys can someone help me pls, I've just started mining Darkcoin coming from mining many scrypt coins.

I can get Sgminer running but on my 7950 I can only get 1.53m/hash which seems a little low. I cant seem to change the intensity either, it's stuck on 13 no matter what I set it to in my batch file??

badman74

hero member

Activity: 658

Merit: 500

Quote from: gizzig on March 07, 2014, 05:12:22 PM

Quote from: badman74 on March 07, 2014, 05:06:51 PM

Quote from: gizzig on March 07, 2014, 05:03:01 PM

Since yesterday I have the problem in MPOS pools

100% : "share is above target"

but it was working well and I have not changed anything

Help, please

a lot of the mpos cpu pools have been fixing there pool so that gpu miners cant mine there

But it is discrimination against GPUs!

and what is the solution to the problem? (I do not even like mine in p2pools)

thans

only solutions i know of is running your own pool or solo mining if diff isn't too high

olrosseel

newbie

Activity: 28

Merit: 0

Quote from: phm on February 19, 2014, 08:00:08 PM

Quote from: TanteStefana on February 19, 2014, 07:52:05 PM

I gave this a try on my ubuntu with 5770 card and it won't go beyond
"Kernel darkcoin is experimental"

It just stops there

Can I help with more info? let me know

During the first execution it compiles the OpenCL kernel, it may take a while. If CPU usage is high during this time, everything is OK and it shall run after a minute or so (depends on how fast your CPU is). If not, try upgrading drivers, I use version 13.12.

I'm also stuck on "kernel darkcoin is experimental".

CPU is almost 100% for Xorg.
Do I have to worry or is it just still compiling?

gizzig

hero member

Activity: 632

Merit: 500

Quote from: badman74 on March 07, 2014, 05:06:51 PM

Quote from: gizzig on March 07, 2014, 05:03:01 PM

Since yesterday I have the problem in MPOS pools

100% : "share is above target"

but it was working well and I have not changed anything

Help, please

a lot of the mpos cpu pools have been fixing there pool so that gpu miners cant mine there

But it is discrimination against GPUs!

and what is the solution to the problem? (I do not even like mine in p2pools)

thans

badman74

hero member

Activity: 658

Merit: 500

Quote from: gizzig on March 07, 2014, 05:03:01 PM

Since yesterday I have the problem in MPOS pools

100% : "share is above target"

but it was working well and I have not changed anything

Help, please

a lot of the mpos cpu pools have been fixing there pool so that gpu miners cant mine there

gizzig

hero member

Activity: 632

Merit: 500

Since yesterday I have the problem in MPOS pools

100% : "share is above target"

but it was working well and I have not changed anything

Help, please

Topic: [ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 57. (Read 515718 times)