Try adding +1 (or +0.x where x is a number) after your user name to manually increase share difficulty. It works on any p2pool I have tried.
Can you show an example ?
typical CPU setting:
-u USERNAME
typical GPU setting:
-u USERNAME+1
Topic: [ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 58. (Read 515718 times)
March 07, 2014, 03:17:20 PM
Can you show an example ?
typical CPU setting:
-u USERNAME
typical GPU setting:
-u USERNAME+1
March 07, 2014, 02:01:01 PM
Try adding +1 (or +0.x where x is a number) after your user name to manually increase share difficulty. It works on any p2pool I have tried.
Can you show an example ?
March 07, 2014, 01:21:22 PM
Try adding +1 (or +0.x where x is a number) after your user name to manually increase share difficulty. It works on any p2pool I have tried.
March 07, 2014, 11:26:36 AM
Why are all pools rejecting shares with "share above target" when they were working fine for the past week or so?
Doesn't matter which pool or coin/algo.
Doesn't matter which pool or coin/algo.
I have this problem as well, ever since yesterday afternoon that it's impossible to mine on MPOS pools.
Anyone know why this is happening or came about to a solution to the problem?
either that or solo mining
and on that note...
can someone tell me what to change on p2pool setup to increase the allowable diff?
March 07, 2014, 11:03:30 AM
Why are all pools rejecting shares with "share above target" when they were working fine for the past week or so?
Doesn't matter which pool or coin/algo.
http://s28.postimg.org/y07vv30p5/Untitled_1.jpg
Doesn't matter which pool or coin/algo.
http://s28.postimg.org/y07vv30p5/Untitled_1.jpg
I have this problem as well, ever since yesterday afternoon that it's impossible to mine on MPOS pools.
Anyone know why this is happening or came about to a solution to the problem?
March 07, 2014, 07:11:37 AM
Hello, did anyone started FZ mining with sph-sgminer?
Here is my .bat for 280x
set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=0
sgminer -k quarkcoin -o http://fz2.mine-pool.net:9372 -u wltadress -p X -I 16 -g 4 -w 64 --auto-fan --temp-target 70 --thread-concurrency 8192 --no-submit-stale
Have accepted, but getting a lot of HWs, what did I do wrong?
Tried different -I parameter, doesn't help
add +1 to your wallet address to get higher diff, if that doesn't increase the diff enough the pool probably hasn't been patched to allow gpu minersHere is my .bat for 280x
set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=0
sgminer -k quarkcoin -o http://fz2.mine-pool.net:9372 -u wltadress -p X -I 16 -g 4 -w 64 --auto-fan --temp-target 70 --thread-concurrency 8192 --no-submit-stale
Have accepted, but getting a lot of HWs, what did I do wrong?
Tried different -I parameter, doesn't help
the HW errors are because you are trying to process too many small shares
March 07, 2014, 04:45:07 AM
Hello, did anyone started FZ mining with sph-sgminer?
Here is my .bat for 280x
set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=0
sgminer -k quarkcoin -o http://fz2.mine-pool.net:9372 -u wltadress -p X -I 16 -g 4 -w 64 --auto-fan --temp-target 70 --thread-concurrency 8192 --no-submit-stale
Have accepted, but getting a lot of HWs, what did I do wrong?
Tried different -I parameter, doesn't help
Here is my .bat for 280x
set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=0
sgminer -k quarkcoin -o http://fz2.mine-pool.net:9372 -u wltadress -p X -I 16 -g 4 -w 64 --auto-fan --temp-target 70 --thread-concurrency 8192 --no-submit-stale
Have accepted, but getting a lot of HWs, what did I do wrong?
Tried different -I parameter, doesn't help
March 07, 2014, 01:58:46 AM
I could use some help with my 280X config. Currently getting only a little over 1.7 MH/s per card.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer -k quarkcoin -o p2pool.altcryptomining.com:10456 -u walletaddress -p x --lookup-gap 2 --thread-concurrency 11200 -g 2 -I 13 -w 256 --auto-fan --gpu-fan 30-75 --temp-cutoff 90 --temp-overheat 85 --temp-target 72 --gpu-memclock 1500 --gpu-engine 1050 --gpu-powertune -20 --no-submit-stale
I tried with thread concurrency 8192 and gpu engine 1100 but i didn't see a big difference.
edit
with -g 1 and -I 15 i get over 2MH/s
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer -k quarkcoin -o p2pool.altcryptomining.com:10456 -u walletaddress -p x --lookup-gap 2 --thread-concurrency 11200 -g 2 -I 13 -w 256 --auto-fan --gpu-fan 30-75 --temp-cutoff 90 --temp-overheat 85 --temp-target 72 --gpu-memclock 1500 --gpu-engine 1050 --gpu-powertune -20 --no-submit-stale
I tried with thread concurrency 8192 and gpu engine 1100 but i didn't see a big difference.
edit
with -g 1 and -I 15 i get over 2MH/s
Try this on 280x. Im getting 2.2MH/s
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx DISPLAY 0
sgminer.exe --kernel darkcoin -o stratum+tcp://drk.coinmine.pl:6090 -u xxx -p xxx -I 20 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8192 --shaders 2048 --gpu-engine 1150 --gpu-memclock 1500 --gpu-powertune 20
Donations Appreciated. Thanks!
Xe4MHbA4Mjfvun1JxFzc8MrpwoU9C17x74
March 07, 2014, 01:18:50 AM
Do you know if it is possible to use http proxy ? i try -x http://proxy:port, but dont work. only socks proxy allowed ?
March 06, 2014, 08:27:33 PM
Is it possible to run Skein with this miner ? I have trouble doing so, it just exits...
pretty sure skein isnt set up as a usable algo at least by itself March 06, 2014, 07:41:25 PM
Can you please paste here bat configuration ?
set TERM=setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx DISPLAY 0
sgminer.exe -k quarkcoin --gpu-engine 900,900,950,950 --gpu-memclock 1100,1100,1400,1400 -I 16,16,12,12 -g 2 -w 256 --thread-concurrency 3200 --lookup-gap 2 -o stratum+tcp://prt.npool.org:2300 -u PjGAN5jzGkbAYdZZH6FPkGpCyijFL4WUpN+1 -p x
March 06, 2014, 07:14:29 PM
Is it possible to run Skein with this miner ? I have trouble doing so, it just exits...
March 06, 2014, 05:17:51 PM
Why are all pools rejecting shares with "share above target" when they were working fine for the past week or so?
Doesn't matter which pool or coin/algo.
Doesn't matter which pool or coin/algo.
March 06, 2014, 03:03:24 PM
why miner shows a speed and on a pool is quite another 
March 06, 2014, 09:27:37 AM
Can you please paste here bat configuration ?
March 06, 2014, 08:07:49 AM
Anyone succeeded to start sgminer with quark mining ?
yes -k quarkcoin -I 14 March 06, 2014, 06:39:24 AM
Anyone succeeded to start sgminer with quark mining ?
March 06, 2014, 04:39:29 AM
I've got only share is above the target with my X 280 when i tryed to mine quarks:
[11:39:01] Rejected 1ebbbe44 Diff 0.033/0.008 GPU 3 (Share is above targ
[11:39:01] Rejected 4bd910f7 Diff 0.013/0.008 GPU 3 (Share is above targ
[11:39:01] Rejected 582f6c61 Diff 0.011/0.008 GPU 3 (Share is above targ
[11:39:02] Rejected 73c84658 Diff 0.009/0.008 GPU 0 (Share is above targ
[11:39:02] Rejected 5c7d10b1 Diff 0.011/0.008 GPU 0 (Share is above targ
[11:39:02] Rejected 791741b2 Diff 0.008/0.008 GPU 2 (Share is above targ
[11:39:02] Rejected 3a604bcd Diff 0.017/0.008 GPU 2 (Share is above targ
[11:39:02] Rejected 0664be1b Diff 0.156/0.008 GPU 3 (Share is above targ
Command is: sgminer.exe -k quarkcoin -o stratum+tcp://mine1.coinmine.pl:6010 -u xxxx -p xxxxxx --lookup-gap 2 --thread-concurrency 11200 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --temp-target 72 --gpu-memclock 1500 --gpu-engine 1050 --gpu-powertune -20 --no-submit-stale
Anyone help please ?
[11:39:01] Rejected 1ebbbe44 Diff 0.033/0.008 GPU 3 (Share is above targ
[11:39:01] Rejected 4bd910f7 Diff 0.013/0.008 GPU 3 (Share is above targ
[11:39:01] Rejected 582f6c61 Diff 0.011/0.008 GPU 3 (Share is above targ
[11:39:02] Rejected 73c84658 Diff 0.009/0.008 GPU 0 (Share is above targ
[11:39:02] Rejected 5c7d10b1 Diff 0.011/0.008 GPU 0 (Share is above targ
[11:39:02] Rejected 791741b2 Diff 0.008/0.008 GPU 2 (Share is above targ
[11:39:02] Rejected 3a604bcd Diff 0.017/0.008 GPU 2 (Share is above targ
[11:39:02] Rejected 0664be1b Diff 0.156/0.008 GPU 3 (Share is above targ
Command is: sgminer.exe -k quarkcoin -o stratum+tcp://mine1.coinmine.pl:6010 -u xxxx -p xxxxxx --lookup-gap 2 --thread-concurrency 11200 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --temp-target 72 --gpu-memclock 1500 --gpu-engine 1050 --gpu-powertune -20 --no-submit-stale
Anyone help please ?
March 06, 2014, 04:10:16 AM
if I use qubitcoin on myriad will it work considering it accepts the qubit algo ?
Yes.
thank you, you are a gentleman and a scholar.
edit: does anyone know what the hash ratio is per algo explicitly ?
from what I tested it's 1 to 300 on scrypt to skein ration
what about scrypt to qubit or scrypt groestl ?
March 06, 2014, 01:50:41 AM
if I use qubitcoin on myriad will it work considering it accepts the qubit algo ?
Yes.
Jump to: