Author

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 140. (Read 1260226 times)

donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
Can you say anything about the expected development time for gen 3?
Are we looking at weeks, months, years?
Few months. We have two parallel efforts, each with different risk / reward and timeframe.
It's not around the corner, we need to squeeze the most from 28, since we don't do FinFET yet.
newbie
Activity: 43
Merit: 0
Can you say anything about the expected development time for gen 3?
Are we looking at weeks, months, years?
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
...
Their saying the definetly WILL NOT produce consumer models for their next gen...
What I said was that our initial form factor for the 3rd gen will be suitable for bulk buyers.
Please read my last messages.

This is fine, as long as that grade is not required at a truck load to buy. I could buy a single 16kw unit. no issue, would like to buy from you and not from a third party, unless you plan to have authorized resellers?


We'll probably sell single units as well. It's not a promise though. I believe that a much better model for a small buyers will be to buy some small percentage of a shared mine.
legendary
Activity: 1050
Merit: 1000
...
Their saying the definetly WILL NOT produce consumer models for their next gen...
What I said was that our initial form factor for the 3rd gen will be suitable for bulk buyers.
Please read my last messages.

This is fine, as long as that grade is not required at a truck load to buy. I could buy a single 16kw unit. no issue, would like to buy from you and not from a third party, unless you plan to have authorized resellers?

hero member
Activity: 742
Merit: 500
Thank you very much! Grin
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
Morning!
Can the 2 psu's in sp3x be powered 5 to 10seconds apart? don't want to shock to much the electric circuits in my house:)
Thank you!
Yes, no issue at all.
legendary
Activity: 1274
Merit: 1000
Personal text my ass....
So my SP10 just arrived (ordered from Ebay) and so far it's made me decide not to buy anything from the website again. The case is banged up to hell to the point that the power supply wouldn't even slide out. The unit was not well protected even in the cardboard box... So does anyone have any tips for opening up an sp10? I'm going to take the casing and see if I can bend the dents out.
The boxes aren't really meant for double/multiple shipping times. After the first shipment the box usually gets banged up a little but not much, but it weakens the packaging enough for the next shipment to just fall apart. If it came by pallet originally you get 1 extra shipment out of it usually. I wouldn't buy a SP10 in original packaging I would want it / make sure its wrapped in bubble wrap and potentially a new box.

The only stuff that works is those molds they make. Like a really tough styrofoam feel but a lot more dense. That's the best for packaging heavy items. And then you need a triple layer cardboard box so the box itself doesn't fall apart. Hard to ship stuff some times.

hero member
Activity: 742
Merit: 500
Smiley)))))))) you the man! Grin
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
hero member
Activity: 742
Merit: 500
I know, no rush as i still need to get rid of antminers Grin
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
Morning!
Can the 2 psu's in sp3x be powered 5 to 10seconds apart? don't want to shock to much the electric circuits in my house:)
Thank you!
Checking. It's the weekend ...
hero member
Activity: 742
Merit: 500
Morning!
Can the 2 psu's in sp3x be powered 5 to 10seconds apart? don't want to shock to much the electric circuits in my house:)
Thank you!
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
Does the SP31 need 220?
No, but the hash-rate will be lower due to increased PSU loss.

Hmm, I'll have to see if I can get 220 run since there's no more sp20s :p
Good strategy  Smiley
full member
Activity: 224
Merit: 100
Does the SP31 need 220?
No, but the hash-rate will be lower due to increased PSU loss.

Hmm, I'll have to see if I can get 220 run since there's no more sp20s :p
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
WHat does 6 blink of the yellow led mean  Huh
The yellow led shows powering up sequence and "User Led" to help identify the unit.

The SP20 Quick Start Guide and User Guide are here:
http://www.spondoolies-tech.com/pages/faq
donator
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
Does the SP31 need 220?
No, but the hash-rate will be lower due to increased PSU loss.
full member
Activity: 224
Merit: 100
Does the SP31 need 220?
legendary
Activity: 1484
Merit: 1004
WHat does 6 blink of the yellow led mean  Huh
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
I see it working, but I also see a hashrate dip in the last half hour or so that could have been downtime.
legendary
Activity: 3892
Merit: 4331
OT: Hey, is Eligius off? I don't see the web site and miners switched over.
Jump to: