[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 267.

wpgdeez

hero member

Activity: 728

Merit: 500

Quote from: Barbara123 on November 30, 2014, 02:26:23 AM

Quote from: edgar on November 27, 2014, 07:42:25 PM

I was specifically referring to barabara, who in the emails where i asked for a discount neglected to mention any sale and in fact advised me to buy asap...

would it not THEN have been logical to mention there is a sale starting imminently...?

OK, so will you (SPT) honor the 100USD discount seeing as my order is still 'pending & unfulfilled' $940.00 ?

Yes, we will honor the $100. Please e-mail me at [email protected]. Barbara

Barbara, I have a support ticket open with you. Why are you not replying to my emails, it has been 5 days now since your last and only reply advising me to try the SP20 firmware on my SP10?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: raskul on November 30, 2014, 09:46:09 AM

Quote from: philipma1957 on November 30, 2014, 09:45:46 AM

Quote from: raskul on November 30, 2014, 09:34:20 AM

waiting for the

"sold out" sign on curent batches Lips sealed

I want 1 more wait for me!!

i can't until mmpool hits a block.

Angry

I got one more with your link. here is transaction id!

https://blockchain.info/tx/d331c82ad197ae0f3ecb0884dcaeb86233fb6e78a12752b2a7f2a1cdab45e1ce

I may buy 1 more tomorrow!

oh I am shooting 20 th at mmpool as I type for a few more hours.

raskul

sr. member

Activity: 434

Merit: 250

Quote from: philipma1957 on November 30, 2014, 09:45:46 AM

Quote from: raskul on November 30, 2014, 09:34:20 AM

waiting for the

"sold out" sign on curent batches Lips sealed

I want 1 more wait for me!!

i can't until mmpool hits a block.

Angry

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: raskul on November 30, 2014, 09:34:20 AM

waiting for the

"sold out" sign on curent batches Lips sealed

I want 1 more wait for me!!

raskul

sr. member

Activity: 434

Merit: 250

waiting for the

"sold out" sign on curent batches Lips sealed

ElGabo

hero member

Activity: 635

Merit: 500

Quote from: Guy Corem on November 30, 2014, 09:06:28 AM

Quote from: ElGabo on November 30, 2014, 08:54:07 AM

Quote from: ?? on ??

Quote from: ElGabo on November 30, 2014, 08:41:22 AM

We're in an e-mail change with Barbara about a shipping a few pieces of SP20.

I would like to put the order but I sent her a few questions in reply.

Will she answer me today or have to wait until tomorrow? (Just how to do my afternoon....)

i have received email from Barbara today, wrt placing a new (discounted) order.

i imagine they are quite busy now if the sale ends at midnight (unsure)

I've received today too.

Just want to make clear 2 more questions before I order.

Hope I'll got answer.

We are experiencing a higher volume of requests and inquiries than usual. We will try to get back to everyone as soon as possible.
Please note that this might take longer than usual.

Thanks for the answer!

I put the order and I hope we can discuss it until the package has sent.

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: ElGabo on November 30, 2014, 08:54:07 AM

Quote from: ?? on ??

Quote from: ElGabo on November 30, 2014, 08:41:22 AM

We're in an e-mail change with Barbara about a shipping a few pieces of SP20.

I would like to put the order but I sent her a few questions in reply.

Will she answer me today or have to wait until tomorrow? (Just how to do my afternoon....)

i have received email from Barbara today, wrt placing a new (discounted) order.

i imagine they are quite busy now if the sale ends at midnight (unsure)

I've received today too.

Just want to make clear 2 more questions before I order.

Hope I'll got answer.

We are experiencing a higher volume of requests and inquiries than usual. We will try to get back to everyone as soon as possible.
Please note that this might take longer than usual.

ElGabo

hero member

Activity: 635

Merit: 500

Quote from: ?? on ??

Quote from: ElGabo on November 30, 2014, 08:41:22 AM

We're in an e-mail change with Barbara about a shipping a few pieces of SP20.

I would like to put the order but I sent her a few questions in reply.

Will she answer me today or have to wait until tomorrow? (Just how to do my afternoon....)

i have received email from Barbara today, wrt placing a new (discounted) order.

i imagine they are quite busy now if the sale ends at midnight (unsure)

I've received today too.

Just want to make clear 2 more questions before I order.

Hope I'll got answer.

ElGabo

hero member

Activity: 635

Merit: 500

We're in an e-mail change with Barbara about a shipping a few pieces of SP20.

I would like to put the order but I sent her a few questions in reply.

Will she answer me today or have to wait until tomorrow? (Just how to do my afternoon....)

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: mdude77 on November 30, 2014, 08:01:46 AM

Quote from: Guy Corem on November 30, 2014, 07:32:03 AM

Quote from: mdude77 on November 30, 2014, 07:27:56 AM

Does Spondoolies ship to the US? I'm trying to place an order to the east coast of the US and I receive this on checkout:

Unfortunately there is no Shipping Rate available for your destination and/or weight of your cart.

Huh

M

Please try again

Thanks. It works now. But I'm confused.

First of it, is the deal through Monday, or until Monday, meaning through Sunday?

Second, it says "$695 shipped". But on checkout, it wants to add $119 in shipping? Which is it?

M

The deal will be available until the end of the day on Monday.

Whenever we have room available in the data center we can offer hosting for the units. in the case of "Cyber Monday Special Price: SP20 Jackson November Batch 2 - Shipped" is an indication that the unit is designated for shipping, not hosting.
Shipping charges are only included for the SP20 Mini Farm deal.

zvisha

hero member

Activity: 560

Merit: 500

Ok, we updated the "sd recovery" image to support all SP20 types correctly.
Please download
http://storage.googleapis.com/spond_firmware/spond_images_sp20.zip
and follow instructions
http://www.spondoolies-tech.com/blogs/technical-blog/13098521-sp10-sp2x-sp3x-recovery-sd-card-boot-sd-card-creation-instructions
again if you have SP20 with identity crisis.

zvisha

hero member

Activity: 560

Merit: 500

Quote from: Tupsu on November 30, 2014, 07:47:54 AM

Quote from: Biffa on November 30, 2014, 07:16:49 AM

Don't type the word "type" and don't put quotes around it either.

At the command prompt just put:

Code:

echo SP2x > /model_id; echo SP20 > /model_name;

Too complicated for me.
Does the model name must be model_name
Does the model id must be miner-FL1448081742 or model_id

I'm better waiting for the software to correct this mistake.
One SP20 does not work at all, and the second miner Mining Rate: 1727.35Ghs which is great result.

Please follow the following instructions in the same way you followed them last time:

1) ssh into the unit
2) echo SP2x > /model_id; echo SP20 > /model_name;
3) Do FW upgrade using Web

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: Guy Corem on November 30, 2014, 07:32:03 AM

Quote from: mdude77 on November 30, 2014, 07:27:56 AM

Does Spondoolies ship to the US? I'm trying to place an order to the east coast of the US and I receive this on checkout:

Unfortunately there is no Shipping Rate available for your destination and/or weight of your cart.

Huh

M

Please try again

Thanks. It works now. But I'm confused.

First of it, is the deal through Monday, or until Monday, meaning through Sunday?

Second, it says "$695 shipped". But on checkout, it wants to add $119 in shipping? Which is it?

M

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: Biffa on November 30, 2014, 07:16:49 AM

Don't type the word "type" and don't put quotes around it either.

At the command prompt just put:

Code:

echo SP2x > /model_id; echo SP20 > /model_name;

Too complicated for me.
Does the model name must be model_name
Does the model id must be miner-FL1448081742 or model_id

I'm better waiting for the software to correct this mistake.
One SP20 does not work at all, and the second miner Mining Rate: 1727.35Ghs which is great result.

Guy Corem

donator

Activity: 1414

Merit: 1051

Spondoolies, Beam & DAGlabs

Quote from: mdude77 on November 30, 2014, 07:27:56 AM

Does Spondoolies ship to the US? I'm trying to place an order to the east coast of the US and I receive this on checkout:

Unfortunately there is no Shipping Rate available for your destination and/or weight of your cart.

Huh

M

Please try again

raskul

sr. member

Activity: 434

Merit: 250

Quote from: mdude77 on November 30, 2014, 07:27:56 AM

Does Spondoolies ship to the US? I'm trying to place an order to the east coast of the US and I receive this on checkout:

Unfortunately there is no Shipping Rate available for your destination and/or weight of your cart.

Huh

M

they do, but i think philipma had a similar problem, not sure how he fixed the issue, perhaps it was a problem on the website side...

mdude77

legendary

Activity: 1540

Merit: 1001

Does Spondoolies ship to the US? I'm trying to place an order to the east coast of the US and I receive this on checkout:

Unfortunately there is no Shipping Rate available for your destination and/or weight of your cart.

Huh

M

Biffa

legendary

Activity: 3234

Merit: 1220

Quote from: ?? on ??

Quote from: raskul on November 30, 2014, 06:48:13 AM

Quote from: ?? on ??

Quote from: zvisha on November 30, 2014, 04:35:18 AM

Your version does not recognise VPD as SP20. We will fix this, but in the mean-time there is a simple way to fix this:

1) ssh into the unit
2) type "echo SP2x > /model_id; echo SP20 > /model_name;"
3) Do FW upgrade (2.5.27)

Update me if this worked.

echo SP2x > /model_id; echo SP20 > /model_name; not found

too many spaces between..?

Quote

SP20 > /model_name;

No.
http://www.perearstike.ee/avatar/not.found.jpg

Don't type the word "type" and don't put quotes around it either.

At the command prompt just put:

Code:

echo SP2x > /model_id; echo SP20 > /model_name;

raskul

sr. member

Activity: 434

Merit: 250

Quote from: ?? on ??

Quote from: raskul on November 30, 2014, 06:48:13 AM

Quote from: ?? on ??

Quote from: zvisha on November 30, 2014, 04:35:18 AM

Your version does not recognise VPD as SP20. We will fix this, but in the mean-time there is a simple way to fix this:

1) ssh into the unit
2) type "echo SP2x > /model_id; echo SP20 > /model_name;"
3) Do FW upgrade (2.5.27)

Update me if this worked.

echo SP2x > /model_id; echo SP20 > /model_name; not found

too many spaces between..?

Quote

SP20 > /model_name;

No.
http://www.perearstike.ee/avatar/not.found.jpg

that screen shot shot you have put 3 spaces?
i dunno, i'm not that technically minded, i hope you get it sorted

raskul

sr. member

Activity: 434

Merit: 250

Quote from: ?? on ??

Quote from: zvisha on November 30, 2014, 04:35:18 AM

Your version does not recognise VPD as SP20. We will fix this, but in the mean-time there is a simple way to fix this:

1) ssh into the unit
2) type "echo SP2x > /model_id; echo SP20 > /model_name;"
3) Do FW upgrade (2.5.27)

Update me if this worked.

echo SP2x > /model_id; echo SP20 > /model_name; not found

too many spaces between..?

Quote

SP20 > /model_name;

Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 267. (Read 1260290 times)