I can see them selling out by Sunday
damn sometimes mining DGM on a small pool isn't all it's cracked up to be!
Topic: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs - page 272. (Read 1260290 times)
November 27, 2014, 07:21:36 PM
Black Friday til Cyber Monday sale Ed.
I can see them selling out by Sunday
damn sometimes mining DGM on a small pool isn't all it's cracked up to be!
I can see them selling out by Sunday
damn sometimes mining DGM on a small pool isn't all it's cracked up to be!
November 27, 2014, 07:18:35 PM
695!
barbara told me yesterday to hurry with the 795 'to be sure it would be in stock'
barbara told me yesterday to hurry with the 795 'to be sure it would be in stock'
November 27, 2014, 07:14:18 PM
whoa! the latest SP20 out of the blocks looks like it's gonna be delivered door-to-door in under 24 hrs!
6 Customs status updated (RASKUL LAND) 23:45
5 Departed Facility in (FUEL STOP) 23:59
4 Transferred through (FUEL STOP) 23:57
3 Departed Facility in (SPONDOOLIES-LAND) 19:45
2 Processed at (SPONDOOLIES-LAND) 19:33
1 Shipment picked up (SPONDOOLIES-LAND) 16:28
there's only 7 steps to heaven, don'cha know!?
i also note price has been reduced by another $100 on the SP-Tech website.
I'm hoping my pool hits a block today so I can order more before they sell out.
6 Customs status updated (RASKUL LAND) 23:45
5 Departed Facility in (FUEL STOP) 23:59
4 Transferred through (FUEL STOP) 23:57
3 Departed Facility in (SPONDOOLIES-LAND) 19:45
2 Processed at (SPONDOOLIES-LAND) 19:33
1 Shipment picked up (SPONDOOLIES-LAND) 16:28
there's only 7 steps to heaven, don'cha know!?
i also note price has been reduced by another $100 on the SP-Tech website.
I'm hoping my pool hits a block today so I can order more before they sell out.
November 27, 2014, 07:11:38 PM
I'm very happy with my SP20's performance with p2pool, it's steady and to spec. I do have a couple of questions though, if someone can help me out:
I want to experiment with the -queue setting, as from my experience p2pool likes this set to zero & reduces the DOA/stale rate. I presume that as there is no flag in the cgminer command already - it is using the default setting of 1? When I add the command "queue":"0" to cgminer via ssh & restart the miner, the queue flag is displayed on the cgminer pools page, but with no value stated underneath, instead of showing 0. Is this a bug, or am I unable to use the queue command on the SP20?
You can change params in /etc/cgminer.conf. You can also replace cgminer in /etc/bin/ with custom cgminer, or with script that will call any excecutible with any parameters. I am not experienced with cgminer in p2pool to help beyond that.
Also, on the asics stats page, am I correct in thinking that board 0 corresponds to loop 0, board 1 to loop 1, etc? I've noticed that loop 0 & 2 are running at a lower temp than loops 1 & 3 - so was wondering if I can increase the watts to those loops/boards via the settings page? Or do the watts have to be the same for all 4 boards (power units on the settings page)?
There are 4 virtual boards in SP20, and the back boards (1/3) are throttled more in temp over 17C because they are not getting cool air. Increase fans or decrease ambient temp, if possible.
Thanks in advance
I want to experiment with the -queue setting, as from my experience p2pool likes this set to zero & reduces the DOA/stale rate. I presume that as there is no flag in the cgminer command already - it is using the default setting of 1? When I add the command "queue":"0" to cgminer via ssh & restart the miner, the queue flag is displayed on the cgminer pools page, but with no value stated underneath, instead of showing 0. Is this a bug, or am I unable to use the queue command on the SP20?
You can change params in /etc/cgminer.conf. You can also replace cgminer in /etc/bin/ with custom cgminer, or with script that will call any excecutible with any parameters. I am not experienced with cgminer in p2pool to help beyond that.
Also, on the asics stats page, am I correct in thinking that board 0 corresponds to loop 0, board 1 to loop 1, etc? I've noticed that loop 0 & 2 are running at a lower temp than loops 1 & 3 - so was wondering if I can increase the watts to those loops/boards via the settings page? Or do the watts have to be the same for all 4 boards (power units on the settings page)?
There are 4 virtual boards in SP20, and the back boards (1/3) are throttled more in temp over 17C because they are not getting cool air. Increase fans or decrease ambient temp, if possible.
Thanks in advance
Inline.
Hi zvisha,
Inline? Does that mean the watts must be the same for all 4 power inputs?
Thanks again
PatMan, you problably have figured it out by yourself already, but "Inline" means here "The answers were placed inline as bold text".
Yeah, I worked that bit out eventually...
Thanks. But I still don't know if it's OK to set the boards/loops at different settings or weather I have to keep them all the same...... 
November 27, 2014, 07:11:09 PM
Order 3242. I don't have a ticket number, but have sent 3 emails through your contact form on your website.
Found the ticket. Your miner will be shipped on Sunday and we'll compensate for the delay from the 18, as written few pages back.Guy
Great, thanks for the update.
Guy, my SP20 finally shipped today and I won't receive it until Monday, December 1st. When can we expect compensation for the shipping delay?
November 27, 2014, 06:46:27 PM
I have an Emerson 1200 PSU failure .. what would be the easiest way to contact SPT for warranty?
...
Email support@...
Emailed earlier, thanks!
November 27, 2014, 06:25:38 PM
I'm very happy with my SP20's performance with p2pool, it's steady and to spec. I do have a couple of questions though, if someone can help me out:
I want to experiment with the -queue setting, as from my experience p2pool likes this set to zero & reduces the DOA/stale rate. I presume that as there is no flag in the cgminer command already - it is using the default setting of 1? When I add the command "queue":"0" to cgminer via ssh & restart the miner, the queue flag is displayed on the cgminer pools page, but with no value stated underneath, instead of showing 0. Is this a bug, or am I unable to use the queue command on the SP20?
You can change params in /etc/cgminer.conf. You can also replace cgminer in /etc/bin/ with custom cgminer, or with script that will call any excecutible with any parameters. I am not experienced with cgminer in p2pool to help beyond that.
Also, on the asics stats page, am I correct in thinking that board 0 corresponds to loop 0, board 1 to loop 1, etc? I've noticed that loop 0 & 2 are running at a lower temp than loops 1 & 3 - so was wondering if I can increase the watts to those loops/boards via the settings page? Or do the watts have to be the same for all 4 boards (power units on the settings page)?
There are 4 virtual boards in SP20, and the back boards (1/3) are throttled more in temp over 17C because they are not getting cool air. Increase fans or decrease ambient temp, if possible.
Thanks in advance
I want to experiment with the -queue setting, as from my experience p2pool likes this set to zero & reduces the DOA/stale rate. I presume that as there is no flag in the cgminer command already - it is using the default setting of 1? When I add the command "queue":"0" to cgminer via ssh & restart the miner, the queue flag is displayed on the cgminer pools page, but with no value stated underneath, instead of showing 0. Is this a bug, or am I unable to use the queue command on the SP20?
You can change params in /etc/cgminer.conf. You can also replace cgminer in /etc/bin/ with custom cgminer, or with script that will call any excecutible with any parameters. I am not experienced with cgminer in p2pool to help beyond that.
Also, on the asics stats page, am I correct in thinking that board 0 corresponds to loop 0, board 1 to loop 1, etc? I've noticed that loop 0 & 2 are running at a lower temp than loops 1 & 3 - so was wondering if I can increase the watts to those loops/boards via the settings page? Or do the watts have to be the same for all 4 boards (power units on the settings page)?
There are 4 virtual boards in SP20, and the back boards (1/3) are throttled more in temp over 17C because they are not getting cool air. Increase fans or decrease ambient temp, if possible.
Thanks in advance
Inline.
Hi zvisha,
Inline? Does that mean the watts must be the same for all 4 power inputs?
Thanks again
PatMan, you problably have figured it out by yourself already, but "Inline" means here "The answers were placed inline as bold text".
November 27, 2014, 05:36:48 PM
Can you please let me know if there is a manual workaround I can apply to get my SP10 working under 0c? I'm down for almost 2 weeks now and hope there is a solution other than selling the gear.
Lurker here
also from Canada thought I would chime in. You need to be a bit more reasonable with electronics outdoors methinks. Other than Panasonic Toughbooks operating at -18 outside, not much else. However I ran a 4 GPU mining rig outside last December in -25! most of the winter. But I gave it a chance. This outside on a patio exposed not even in a garage. I covered the rig with a large cardboard box and modified that (vents / fans) to give the rig a chance to warm up and operate. I would suggest you do or try the same; improve the miners immediate surrounds with such a carton or cardboard box, or even some a/c venting or tubing from the exhaust around to the intake to let it take in some warm air. A quick check of that miner's PSU operating temp. states -10 C upwards. That may be your issue. Try a shipping carton, cardboard box over the miner then monitor the running temps of that enclosure once up and running and modify that. -17 bare exposed electronics like even warming up your car sitting overnight in those types of temps will always be difficult regardless of software / firmware other updates.Good luck!
November 27, 2014, 02:03:18 PM
Zvi, I am still having an issue with my SP10 running with intake temperatures at or below 0c. Technical support suggested that I update my firmware to 2.5.13, however it is unavailable in the web GUI.
I found the following kb regarding the issue with low intake temps, http://www.spondoolies-tech.com/blogs/technical-blog/15824368-version-2-5-12
That support article seems to indicate that it is for SP20. SP3X. Is it even possible to apply that firmware to an SP10? If not is there a manual workaround that can be done to get the unit hashing with lower than 0 degree intake?
"Version 2.5.12 became the official, 2.5.6 removed and 2.5.13 is the latest experimental.
2.5.12 - different handling of BIST and Murata flow - improves stability.
2.5.13 - sets default (after factory reset) values to 1275/288 in SP3x/SP2x. Redirection bug fixed. Handling of ambient temperatures lower then 0c added."
I found the following kb regarding the issue with low intake temps, http://www.spondoolies-tech.com/blogs/technical-blog/15824368-version-2-5-12
That support article seems to indicate that it is for SP20. SP3X. Is it even possible to apply that firmware to an SP10? If not is there a manual workaround that can be done to get the unit hashing with lower than 0 degree intake?
"Version 2.5.12 became the official, 2.5.6 removed and 2.5.13 is the latest experimental.
2.5.12 - different handling of BIST and Murata flow - improves stability.
2.5.13 - sets default (after factory reset) values to 1275/288 in SP3x/SP2x. Redirection bug fixed. Handling of ambient temperatures lower then 0c added."
2.X.X are for SP2x and SP3x. Update to latest version (I think it is 1.5.
- you might need to update FW twice (till it says that you have the latest image).
November 27, 2014, 01:52:34 PM
I have an Emerson 1200 PSU failure .. what would be the easiest way to contact SPT for warranty?
...
Email support@ ...
November 27, 2014, 01:52:32 PM
can SP-Tech verify this product to have licence to use the rockerbox chips please?
https://bitcointalksearch.org/topic/m.9672447
Confirmed. Waiting patiently to my sample.https://bitcointalksearch.org/topic/m.9672447
Guy
great. i'm getting just the one for myself. 'lottery ticket' will solo mine with it
November 27, 2014, 01:51:07 PM
can SP-Tech verify this product to have licence to use the rockerbox chips please?
https://bitcointalksearch.org/topic/m.9672447
Confirmed. Waiting patiently to my sample.https://bitcointalksearch.org/topic/m.9672447
Guy
November 27, 2014, 11:42:03 AM
can SP-Tech verify this product to have licence to use the rockerbox chips please?
https://bitcointalksearch.org/topic/m.9672447
Relevant: https://bitcointalksearch.org/topic/m.7983457https://bitcointalksearch.org/topic/m.9672447
thanks, i'd been working away for a couple of months so tl;dr on a lot of stuff.
cheers!
November 27, 2014, 11:40:59 AM
I am at 1.5.8, I just reapplied it to see and it didn't make any difference. Once the intake temp drops to 0 or lower it stops hashing. I'll get about 100 shares processed and then it stops mining. After several minutes the entire unit will reboot and go through the same sequence.
This issue was fixed for SP10s in 1.5.10. I tested it over a week ago, and SP10s work fine on 1.5.10 in temperatures down to at least -10°C.I recommend users of SP20s and SP3Xs try to keep their intake temperatures above 5°C, as we've noticed reliability issues at low temperatures. The current hypothesis is that thermal expansion coefficient mismatches in the ASIC package and hashboard PCB is causing solder joint fractures and separation at very low ambient temperatures.
November 27, 2014, 11:40:14 AM
can SP-Tech verify this product to have licence to use the rockerbox chips please?
https://bitcointalksearch.org/topic/m.9672447
Relevant: https://bitcointalksearch.org/topic/m.7983457 https://bitcointalksearch.org/topic/m.9672447
November 27, 2014, 10:44:42 AM
can SP-Tech verify this product to have licence to use the rockerbox chips please?
https://bitcointalksearch.org/topic/m.9672447
https://bitcointalksearch.org/topic/m.9672447
November 27, 2014, 10:26:15 AM
I have an Emerson 1200 PSU failure .. what would be the easiest way to contact SPT for warranty?
The PSU green LED light does not power up anymore. I tried to SWAP them .. just powering the other part of the SP30.
The PSU green LED light does not power up anymore. I tried to SWAP them .. just powering the other part of the SP30.
November 27, 2014, 10:19:41 AM
How and when can I purchase SP20 with price $695?
"...They are also going to have a Bitcoin Black Friday special that will
bring the price down to $695 and run through Cyber Monday...."
tomorrow. Friday til Monday. However, i have a sneaking feeling that batch won't last til monday and will sell out pretty quickly.
it's an excellent price.
November 27, 2014, 10:17:21 AM
How and when can I purchase SP20 with price $695?
"...They are also going to have a Bitcoin Black Friday special that will
bring the price down to $695 and run through Cyber Monday...."
November 27, 2014, 09:30:21 AM
same problem as before and I am using the address you sent the first one to me.
Please test again. If the problem persists: clear cookies, use another browser or incognito mode. Jump to: